首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
The utilization of laser light to produce fine and selective cleaning of superficial deposits and encrustation from stones was originally proposed more than 20 years ago by John Asmus who performed pioneering trials of laser cleaning on stone façades in Venice, Cremona and Padua. The opportunity to collect stone samples from these sites allowed us to carry out an original study aimed at evaluating the conservation state of stone surfaces cleaned 10–20 years ago by means of three different techniques: Nd:YAG laser radiation, micron sandblasting and chemical pads. Samples of various stone types, as Istria limestone, Botticino limestone and Nanto sandstone were collected and examined by means of optical and SEM microscopy, FT/IR, and EDAX analyses. The results provided preliminary indications that the state of conservation of stone surfaces previously subjected to laser cleaning is generally better in comparison with those which concurrently underwent mechanical and chemical cleaning.  相似文献   

2.
  相似文献   

3.
In the interdisciplinary domain of conservation science, a critical and selective eye is required in order to allow researchers to choose the most effective combination of analytical techniques for each project and, more importantly, to process and analyze the resulting volume of diverse data. The current essay attempts to combine a more traditional workflow for the examination of painted objects with techniques borrowed from the domain of computer science in order to yield the maximum amount of information and make that added knowledge more accessible to the researcher. The project was approached as a case study, regarding a post-Byzantine icon. Three-dimensional digitization with a laser scanning system, X-ray radiography and optical microscopy were applied for the determination of several structural characteristics of the painted surface and the icon's state of preservation. Multispectral imaging was used for the collection of surface spectral data, which were subsequently processed by means of cluster analysis in a novel approach to map the composition of the painted surface. Finally, micro-X-Ray Fluorescence (μ-XRF) was chosen as the primary source for surface pointwise elemental composition data while Fourier Transform Infrared Spectroscopy (FTIR) and Gas Chromatography coupled with Mass Spectroscopy (GC-MS) provided additional assistance in the characterization of materials based on their molecular structure. A custom platform was developed to address the issue of multilevel visualization and assessment of the data, designed to act as a tool for viewing and combining the acquired information. Via this integrated approach valuable information regarding the icon was revealed, including the verification of a prior conservation attempt and partial overpainting, the recording and quantification of the warping of the wooden panel and, finally, the identification of the constituent materials and their spatial distribution.  相似文献   

4.
The oil painting “La Medusa” executed by Caravaggio at the end of the XVI century on a wooden shield, was investigated by integrated physical–chemical and analytical methodologies in order to obtain scientific data capable of elucidating the state of conservation and the painting technique. Optical (OM) and electronic (SEM-EDS) microscopy, micro-FT-IR spectroscopy, gas chromatography–mass spectrometry (GC–MS) and pyrolysis GC–MS were applied on two microfragments and some organic samples obtained by solvent extraction using the swab cleaning technique. The obtained results indicated that Caravaggio probably reused an old shield as a previous gypsum preparation layer has been detected under the original painting layers. He used white lead, natural earths, verdigris and lead–tin yellow type I mixed with drying oils to paint. The considerable amount of amorphous particles of copper chlorides found in the green pigment verdigris suggests that it could have been produced according to the ancient recipe of verde salsum described by Theophilus. Mordant gilding has been identified on the upper part of the shield that can be related to an abandoned experiment to give the painting a mirror-like reflecting effect. Three different varnishes layers have been detected above the painted surface. The original and restoration varnishes have been identified and they contain a mixture of drying oil, mastic and turpentine and some beeswax. Cleaning tests, performed with different organic solvents, suggest the use of isopropyl alcohol as cleaning agent because it is less efficient in comparison to others solvents; thus it ensures a careful and controlled removal of the varnishes.  相似文献   

5.
  相似文献   

6.
The use of coloured pastes for inlaying marble and limestone wall panels is one of the ornamental techniques that were widely used during the Mamluk period in Egypt (1250–1516 AD). Red and black pastes from Qijmas El-Eshaqe mosque (1482 AD) in Cairo were studied to identify their main components. The study of the samples involved the identification of the pigments, additive materials and organic binding media. The study was performed using various analytical methods such as polarising microscopy (PLM), scanning electron microscopy equipped with energy dispersive X-ray analyser (SEM-EDX), inductively-coupled plasma (ICP-AES), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). These complementary analytical techniques provide precise identification of inorganic and organic substances used in the pastes. The results indicated that the red pigment is mainly obtained from red ochre containing hematite, whereas amorphous carbon (bone black and charcoal) was used to obtain the black colour. Both samples contain calcium sulphate, which was used to give some hardness to the pastes. Beeswax was used as an organic medium in both pastes. The study provides the information required for the conservation of the coloured paste ornaments.  相似文献   

7.
This paper deals with a possible application of computer vision techniques in the field of Cultural Heritage. These techniques allow an effective integration of data from different sources. Particular consideration will be given to an accurate geometric analysis of the zone under study in order to detect degradation damage in historical building-stone materials. To this end, we employ a computer vision technique, known as the Shape from Shading method, for which a photographic image of the stone material under consideration is the only input data required. By using this method, it is possible to recover, under some constraints, the shape of the three-dimensional surface of the object from the photographic image. In order to improve the results, in this paper, we implement this technique by using an optimization approach which allows a suitable integration of photographic and spatial data, the latter of which is obtained by a topographical device. We outline the potentialities of the method which mainly consist of two relevant capabilities. The first one is the geometric shape reconstruction of the surface material at a resolution much higher than the one allowed by topographical acquisition. The second one is the correction of the lighting-induced distortions in the photographic image. Such a correction is relevant for further image-based analysis of the degradation of the stone material. Experimental results, obtained by using both photographic and spatial data relative to a pudding stone with degradation, are presented and discussed.  相似文献   

8.
The pigments, organic materials and techniques used on a post-Byzantine icon of St Nicholas were determined by means of several micro-analytical techniques. The icon painter covered the leather support with silver leaf about 3 μm thick to create a smooth working surface. Animal glue was used to secure the leaf to the leather, and FTIR spectroscopy has identified another layer, 30–60 μm thick, of the same material applied as a primer above the silver. Above that, a layer of lead white covering the entire surface creates a white substratum serving the same purpose as the gesso on a wood panel. The colour palette, determined by means of scanning electron microscopy and FTIR spectroscopy, is very simple. Only seven colours were identified: lead white, caput mortuum, red and yellow ochre, cinnabar, carbon black and smalt. As far as we know, this is the first time that smalt has been found on a Byzantine icon. Since smalt was chemically synthesised only after 1500 AD, it may be concluded that this icon was painted after the end of the 15th century. Beeswax was used as a protective varnish.  相似文献   

9.
The study of the interaction between silica glass and saturated Ca(OH)2 solutions can be a useful approach to resolve the problem of the adhesion between lime-sand mortar and clay bricks. Since it is reasonable that the silica–calcium hydroxide system well simulates a brick–mortar system, experimental observations concerning the interaction of silica glass and this strong basic solution should be of value for the comprehension of the chemical reactions that could take place at the mortar–brick interface, maybe affecting the adhesion between the two building materials. We demonstrated the effects of saturated Ca(OH)2 solutions on commercial pure silica glass (fused silica) and on silica films obtained via a sol–gel process by means of dip-coating. Silica samples were dipped in the solutions at different temperatures (room temperature, 60 and 80 °C) and at different time intervals (1 and 21 h) and then they were analysed by means of surface techniques: X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS) and atomic force microscopy (AFM). It has been shown that Ca(OH)2 reacts with the silica glass network. The experimental results clearly show a very different behaviour of sol–gel silica with respect to fused silica, probably because of their different nanostructure. Many problems concerning the interaction of silica and Ca(OH)2 are still to be solved, but the results of this research strengthen the idea that adhesion between lime-sand mortar and clay bricks is caused not only by carbonation of calcium hydroxide contained in the mortar, but even by some chemical reactions involving the brick constituents and calcium hydroxide itself. The final products, calcium silicates, may induce a chemical continuity between lime-sand mortar and clay bricks.  相似文献   

10.
The glazed tile decorative art was one of the widely used ornamental techniques for the monumental buildings during the Mughal period, in Pakistan. Coloured tile samples from Jahangir tomb were analyzed to know the glaze composition and to identify the colouring phases used at that time. The study was performed using light microscopy (OM), scanning electron microscopy equipped with energy dispersive X-ray analyzer (SEM-EDS), Raman spectroscopy (RS) and electron microprobe analysis (EMPA). These complementary analytical techniques allowed characterizing the samples as alkali glazes made from plant ashes. The results indicated the use of lead-tin yellow type II for yellow glazes, cobalt and copper for blue glazes, mixtures of yellow and blue glazes for the green glazes, manganese for purple glazes, and a transparent glaze layer for white glazes.  相似文献   

11.
The binding media of the polychromy of Qin Shihuang's Terracotta Army   总被引：2，自引：0，他引：2  
The “Terracotta Army” is a worldwide known archaeological finding in China. It is a part of the burial complex of the emperor Qin Shihuangdi (259–210 BC), which is still under excavation and study. The fact that the sculptures, chariots and weapons of the First Chinese Emperor's Terracotta Army were originally all painted in bright colours is still not widely known. The chemical characterisation of the paint medium was performed through an analytical procedure based on GC-MS. The proteinaceous binder was identified for the first time through a desalting procedure used in proteomics. The identification of egg as a paint binder is extremely interesting in terms of the historical significance of the work of art itself and important in terms of the method of conservation. Moreover it represents one of the first steps towards an understanding of the painting technique used on ancient sculptures in China, of which – despite their fame – nothing is yet known.  相似文献   

12.
In a parallel study, it has been shown by comparison of successive TV-holography campaigns that murals in the convent of Müstair (Switzerland) have progressively detached from their substrate over a time interval of 5 years (J Cult Herit 2009). Here, we focus on the dynamics of the ongoing detachment processes. In order to regularly measure small surface displacements in situ over a long duration of several years, a new method that we call Mirror Micrometry (MM) has been designed and implemented. This method monitors the reflection of a light beam by a mirror that is mounted to the surface of interest for the duration of the experiment. The mirror is designed to rotate about a pivot as small displacements in the detaching surface occur, thus deflecting the reflected light beam. Measurements over more than three years in the Convent Church and in the Holy Cross Chapel reveal various types of surface displacement perpendicular to the wall surface. These are correlated with relative humidity (RH) changes in the room climate. Reversible short-term variations of approximately ±5–10 μm occur with periods of one to several weeks and relate primarily to weather changes. Reversible long-term variations of ±5–10 μm correspond to averaged seasonal humidity changes. Irregular and irreversible movements in increments of 20–30 μm record very localised progressive detachment steps. A semi-quantitative correlation of approximately 1 μm surface displacement per 1% RH change is calculated. Based on the fact that nearby measuring points can simultaneously move in opposite directions, a geometric model is drawn to explain deformation by hygric swelling and shrinking of different shapes of detached layers.  相似文献   

13.
A group of 51 shards of medieval polychrome glazed pottery, coming from Canosa castle archaeological site (Bari, Italy), has been investigated through surface analytical techniques, such as Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDS) and elemental ones, such as Inductively Coupled Plasma–Optical Emission Spectroscopy (ICP–OES) and Absorption Atomic Spectroscopy (AAS) by flame and electro-thermal atomisation. The investigation was aimed at defining the elemental composition of pottery findings, identifying pigments and clarifying glaze types. The results of the analytical characterization allowed the identification of materials and technological expedients used for pottery manufacturing, highlighting original features in the production of the investigated pottery.The quantitative analysis performed on ceramic paste, glaze and painted decorations provided a significant number of results, thus enabling their effective exploitation for multivariate statistical techniques, in order to find out possible groups of pottery items with defined similarity within the samples.  相似文献   

14.
Along the Umbria-Marche stretch of the Flaminia Consular Road (220 B.C.) several archaeological finds of the most important monumental works, are well preserved. The stones, employed to build many bridges, substructions and sewerages, are represented by carbonatic breccias whose geological environment of formation and source areas had never been established. On the basis of mineralogical, petrographic and micropalaeontological analyses, two groups of these lithotypes employed in Roman age were distinguished: “monogenic carbonatic breccias” only constituted by clasts of the Maiolica Unit (Late Jurassic – Early Cretaceous) and “polygenic carbonatic breccias” made of fragments (in different proportions) of Calcare Massiccio (Early Jurassic), Corniola (Early Jurassic), Maiolica (Late Jurassic – Early Cretaceous) and Scaglia Rossa (Late Cretaceous – Early Paleogene) Units. The possible source areas of the breccias are compatible with stratified slope-waste to scarp-base deposits of periglacial origin belonging to the Upper Pleistocene. In particular, among the seven investigated areas, we pointed out the most probable provenances (Monte Faeto-Colle, Costacciaro, Scirca, Foci, Secchiano) along the flanks of the Apennine Mesozoic chain of the Umbria and Marche regions. Although the Romans could have exploited the whole thickness of some outcrops (now disappeared) of these carbonatic lithotypes at the deepest part of the valleys, we have constrained a local provenance of the breccias so commonly used in the monumental works of the Flaminia.  相似文献   

15.
Laser induced breakdown spectroscopy was used to investigate the composition of a gun found in the Adriatic seabed and kept in the “S. Castromediano” Provincial Museum in Lecce (Italy). Optical emission spectra of the laser-induced plasma from the surface of the piece of ordnance were recorded before and after its restoration. The metal alloy of the gun was determined through the identification of characteristic atomic emissions and confirmed through microanalysis carried out by energy dispersion X-ray spectroscopy. Experimental results evidenced that the gun is of bronze and revealed that elements composing the encrustation and noxious for the object conservation, such as calcium, were removed successfully during the cleaning operation. Performed elemental analyses confirmed that laser induced breakdown spectroscopy is a useful diagnostic tool to test the restoration degree of artworks.  相似文献   

16.
There is little information in the conservation literature with respect to artists’ alkyd paints; thus, artists and conservators are somewhat at a loss about how to use and treat alkyds. Recently, analytical methods have been developed to identify the components in these polymers (oil modified polyesters), rates of cross-linking and mechanical properties. Presented in this paper are some of the characterization results of artists’ alkyd paints using THM (thermally assisted hydrolysis and methylation) gas chromatography– mass spectrometry (THM–GC/MS) and Fourier transform infrared spectroscopy–attenuated total reflectance (FTIR–ATR). Four brands of artists’ alkyd paints containing alkyd resin have been analysed; one containing a phthalic anhydride and pentaerythritol based alkyd resin, two containing isophthalic acid and pentaerythritol based alkyd resins, and the final one containing both phthalic anhydride and isophthalic acid and pentaerythritol based resins among the colours studied.  相似文献   

17.
Optical and SEM-EDS microscopy, X-ray powder diffraction and micro FT-IR spectroscopy investigations of the funerary klinai (couches) of Tomb 1 from Amphipolis and a stone sarcophagus from ancient Tragilos—two painted monuments made by Macedonian craftsmen of the Early Hellenistic period—identified the original materials and painting technique, as well as synthetic materials used as consolidants during past restoration treatments. The original organic binders and the superficial modern coatings have been identified by micro FT-IR spectroscopy applied directly to the sampled powders or tiny fragments and to their solvent—soluble fractions. The pigments identified on the couch of Amphipolis are: red and yellow ochre, cinnabar, Madder lake, paratacamite and antlerite, carbon black, calcium carbonate, kaolin and gypsum. The identification of egg and animal glue confirms the application of tempera and secco techniques. The detection of polymers such as polydimethylsiloxane, polyvinyl acetate and alkyd resins, is related to modern restoration products. The pigments attested on the paintings of the Tragilos' sarcophagus are: red and yellow ochre, Egyptian blue, malachite, carbon black, calcium carbonate and gypsum. The absence of organic binders combined with the constant presence of calcium carbonate in all the examined samples suggests the use of lime as the binding medium in the painted decoration of the sarcophagus. The presence of Paraloid B72 is related to recent conservation treatments.  相似文献   

18.
The chemical composition of 11 glass panes originating from two 13th century non-figurative windows were analyzed by means of Scanning Electron Microscopy–Energy Dispersive X-ray system (SEM-EDX). The windows were discovered in the back-wall of the triforium during the restoration of the choir of the cathedral St. Michael and St. Gudule in Brussels (Belgium). In order to determine if these windows were fabricated with glass of different origin or not, the compositional difference between the panes were compared with the variation in composition as a result of the following causes: (1) compositional fluctuation between panes cut from the same sheet of glass, (2) compositional fluctuation caused when panes are cut from different sheets that were made with the same batch, (3) compositional fluctuation caused when the glass is made from different batches at the same production center, and (4) compositional fluctuation as a result of glass produced at different fabrication centers.  相似文献   

19.
This work describes the quantitative analysis of mercury present in the ink used to colour some books of XVIII century. The mercury content was determined by Energy Dispersive X-ray Spectrometry. This is a non-destructive technique which allows elemental identification and quantification (Z > 13) by atomic physics processes. The organic pigments cannot be identified by this technique, taking into account that its composition is mainly C, O and H. Levels of 2 wt.% and 4.5 wt.% were measured in 1756 and 1753 books respectively. No significant amount of mercury was observed in other red books, on a total of 11, all from XVIII century: 1720, 1732, 1753, 1756, 1780, 1798, 1800. More than one book for each year were analysed. The studied books belong to a private collection, and were selected taking into account the age and the reddish colour of their external parts. High content on Fe were observed in some of the books. This work highlights the application of a physics technique in a very important aspect for art and cultural heritage conservation and restoration, considering that high levels of toxic elements might be found in ancient documents. It is of great importance that preliminary elemental analyses are performed on ancient documents before handling them, because they might constitute some danger for restorers, conservators and collectors. This work highlights, for the first time, the danger of some ancient books. They might contain a very high concentration of mercury, which is toxic for the organism. This is also a particularly important problem of public health never mentioned in literature before.  相似文献   

20.
The scientific approach to the restoration and monitoring of mural paintings, at S. Girolamo Chapel – SS. Annunziata Church in Florence, is reported as a fruitful example of the synergic collaboration between restorers and scientists in the planning and development of conservative interventions. Before restoration, the painting technique and the state of preservation of the pictorial cycle have been investigated firstly by close examination of the painted surfaces and then by optical and/or SEM-EDS microscopy and μFT-IR spectroscopy on appropriately selected samples. In particular, the original constituent materials and those belonging to subsequent restorations were characterized together with those originating from decay processes. In this mural painting cycle, a peculiar “fresco” technique has been used although an auxiliary binder for pigment distemper has been also employed. The use of this technique, sometimes in an improper way together with uncorrected restoration interventions, are the main responsible of the unsatisfactory state of conservation of many painted areas. Preliminary conservation trials and scientific studies were carried out to design the most convenient restoration intervention and to verify the correctness and non-invasive of the necessary operations. Special attention was devoted to cleaning procedures, continuously monitored by a physico-chemical methodology, mainly based on microinvasive, microscopic and spectroscopic investigations, to evaluate the efficiency, advantages and drawbacks of the proposed cleaning procedures and define the most appropriate ones. Finally, specific decay markers have been recognized, by a comparison of the results obtained from the detached samples with those deriving from artificially aged models, to be used for a correct future monitoring and maintenance of the wall paintings.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号