共查询到19条相似文献,搜索用时 843 毫秒
1.
田雪丰 《北京工业职业技术学院学报》2012,11(3):1-4
通过具体实例,阐述了在没有进行岩石的密度测井及岩石孔隙度测井条件下,利用伽玛-伽玛测井曲线及视电阻率测井曲线进行岩石视密度及岩石视孔隙度曲线重构的原理及方法,为进一步利用地震多属性拟孔隙度参数反演预测煤层顶底板富水性奠定了理论基础。 相似文献
2.
《西安文理学院学报》2016,(5)
马泉油页岩测井物性特征表现为中高三侧向电阻率、高自然伽玛、高声波时差、中低密度的"三高一低"测井响应特征.通过常规测井曲线定性定量解释油页岩,划分地层,进行对比;通过水文测井曲线解释含水层,计算出含水层补给速度及补给量;利用声波时差、密度、井径等测井参数计算力学性质,评价岩体软弱性;并对该区油页岩放射性异常特征进行分析.测井技术及相应资料在该区的应用已取得了一定的地质效果. 相似文献
3.
随着水平井技术的大量应用,电阻率测井在测量水平井和大倾斜井中起主导作用.而人们往往沿用传统的测井解释方法来解释水平井测井曲线,而水平井测井与一般直井测井相比,其测井空间、物理环境和响应有诸多不同,特别是电阻率曲线会受到地层电阻率各向异性的严重影响,因此需要对经校正后的测井响应更能反映地层真电阻率,通过本文方法校正后,校正后的电阻率曲线更能反映出薄互层中的砂岩特性. 相似文献
4.
5.
地震反演中约束模型的建立,特别是多井、断裂发育区的三维复杂约束模型的建立,是地震波阻抗约束反演中的关键技术环节,对反演质量有着重要影响。本文运用地震、地质综合分析方法,系统地研究了测井资料垂向井孔轨迹约束、地质层位横向控制约束、断块约束、地层沉积模式和接触关系约束等三维约束模型的关键要素。通过对胜利油田胜坨地区三维复杂区块实际约束模型的建立和反演,证明了该方法行之有效,大大提高了反演结果的精度,取得了良好的应用效果。 相似文献
6.
李海雁 《昆明师范高等专科学校学报》2000,22(4):37-38
给出了温度在300K到2500K范围内,Zr-W阴极电阻率随温度变化的实验曲线,得到了Zr-W阴极电阻率随温度变化的经验公式,对实际工作具有一定的指导意义。 相似文献
7.
8.
申振强 《延安教育学院学报》2013,(5):108-109
主要总结介绍了微电极测井、感应测井、普通电阻率测井、声速测井、井径测井、自然电位测井和自然咖玛测井在测井曲线的特征,为准确快速的进行测井解释作出一定的作用。最后得出常见岩石:砂岩、泥岩、油页岩(长7)、煤线、凝灰质泥岩的电性特征。 相似文献
9.
黄升旗 《世界华商经济年鉴·科学教育家》2009,(4):40-42
本文通过对近年来在安塞油田实施剖面剩余油测试的RMT碳氧比测井、过套管电阻率测井、脉冲中子坤子测井测试原理的介绍,重点分析了三种剩余油测井资料成果分析以及地质应用,并对这三种剩余油测井技术在安塞油田的适用性进行了分析,认为脉冲中子.中子测井更加适用于安塞油田底孔、低渗的储层特征。 相似文献
10.
基于对块村营地质特征的认识,把地质-地球物理特征细化为地层-地球物理特征和岩层-地球物理特征,测井曲线(视电阻率、密度、自然伽马、自然电位)有效反映了这种划分,在此基础上,结合钻探取芯和钻孔编录,从而使地层和煤层的划分变得简洁. 相似文献
11.
为了更精确地预测煤层底板砂岩的富水性,利用多属性分析技术,通过研究和分析各种属性参数,反演研究区岩层的视电阻率属性,并分析反演结果,从而有效地预测了煤层底板砂岩富水性。此项技术在淮北桃园矿区取得很好的效果。 相似文献
12.
13.
To overcome the excessive computational cost and/or bad accuracy of traditional approaches,the probabilistic density evolution method(PDEM) is introduced.The dynamic reliability of a double-layer cylindrical latticed shell is evaluated by applying PDEM and Monte Carlo Method(MCM) respectively,and four apparent wave velocities(100 m/s,500 m/s,800 m/s and 1 200 m/s) and five thresholds(0.1 m,0.2 m,0.3 m,0.4 m and 0.5 m) are taken into consideration.Only the difference between threshold and maximal deformation... 相似文献
14.
介绍一种基于MATLAB曲线拟合界面实现的MoSi2发热体电阻率曲线拟合方法,并利用误差理论对拟合曲线进行误差分析。结果表明,采用三次多项式拟合曲线作为MoSi2发热体电阻率曲线具有较高的精度,该结论与由MATLAB曲线拟合界面拟合获得的SEE、Adj R-square值分析的结果相符合。 相似文献
15.
Ultrasonic wave testing was applied to investigate the quality and weathering status of rock specimens obtained in two borings
situated in the Xishan Buddha rock slope in Taiyuan, China. This paper pays special attention to the distribution of bulk
density, dynamic parameters and static parameters of rock specimens as well as the relationship between static and dynamic
parameters. The results illustrate that the distribution of both parameters is identical along the depth of two drilled holes
in the rock slope. When the hole depth increases, the density of rock mass, saturated compression strength and static elastic
modulus, dynamic elastic modulus and wave velocity also show increase tendency. The weathering degree in the rock mass ranging
from the surface of cliff to the depth of 2.5 m is the highest while the rock mass is unsalted and more rigid when the depth
is larger than 3.0 m. The relationship between dynamic elastic modulus, sonic wave velocity and horizontal depth indicates
that dynamic elastic modulus is more sensitive than sonic wave velocity. Conversely, by comparing quantity relationship between
static elastic modulus and sonic wave velocity, it is found that the composition of rock has a great influence on the relationship
between static and dynamic parameters, that is, inequality of rock composition will lead to dispersion and abnormality of
the distribution of static and dynamic parameters. 相似文献
16.
17.
为简化伸缩变形计算过程,针对代数曲线和参数曲线,提出一种具有区域峰值的伸缩因子曲线变形方法。首先基于 Hermite 插值基函数构造一种多项式伸缩函数,然后建立带有伸缩参数的伸缩因子,最后将伸缩因子作用于曲线,促使曲线沿指定方向产生变形。在变形过程中,通过改变伸缩因子中的形状控制参数,实现曲线整体、局部以及周期变形效果。大量数值实例证明,该方法计算量小,便于理解和操作,可获得适用于不同设计要求的旋转曲面和外形轮廓线。与其它方法相比,该方法不仅可用于参数型曲线,还可用于隐式表示的代数曲线,丰富了隐式曲线的变形效果。 相似文献
18.
通过解向量微分方程组的特解的方法,给出了曲率函数和挠率函数为常数的空间曲线的方程,并通过分析说明具有该特征的曲线就是圆柱螺线,在此基础上进一步探讨了曲率和挠率为非常数但它们的比值为常数的空间曲线的方程. 相似文献
19.
A new method in highway route design: joining circular arcs by a single C-Bézier curve with shape parameter 总被引:1,自引:1,他引:0
We constructed a single C-Bezier curve with a shape parameter for G^2 joining two circular arcs. It was shown that an S-shaped transition curve, which is able to manage a broader scope about two circle radii than the Bezier curves, has no curvature extrema, while a C-shaped transition curve has a single curvature extremum. Regarding the two kinds of curves, specific algorithms were presented in detail, strict mathematical proofs were given, and the effectiveness of the method was shown by examples This method has the following three advantages: (1) the pattern is unified; (2) the parameter able to adjust the shape of the transition curve is available; (3) the transition curve is only a single segment, and the algorithm can be formulated as a low order equation to be solved for its positive root. These advantages make the method simple and easy to implement. 相似文献