共查询到20条相似文献，搜索用时 31 毫秒
1.
王诗彦 《和田师范专科学校学报》2007,27(5):195-196
20世纪现当代艺术的发展大致分为三个阶段：一,为第一次世界大战前的野兽派等;二,为两次世界大战之间的达达主义等;三,为第二次世界大战之后的抽象表现主义等,通过展示每个流派的思潮、特征、等,梳理了这段时期的各种艺术现象。 相似文献
2.
Software has been developed for digital control of WDW series testing machine and the measurement of fracture toughness by modularized design. Development of the software makes use of multi-thread and serial communication techniques, which can accurately control the testing machine and measure the fracture toughness in real-time. Three-point bending specimens were used in the measurement. The software operates stably and reliably, expanding the function of WDW series testing machine. 相似文献
3.
Effect of the content of dopants in the manganese-zinc ferrites on the low power loss is studied by measuring magnetic properties and observing the grain boundary structures. The Mn0.738Zn0.206Fe2.066O4 composition powders were prepared by using conventional ceramic powder processing technique. The microstructure of grain boundary was observed by scanning electron microscope （SEM）. It has been found that power loss is greatly dependent upon the content of the additives. 相似文献
4.
Ml0.7Mm0.3Ni3.7Co0.7Mn0.4Al0.2 nanocrystalline hydrogen storage materials are prepared by melt-spinning(MS).X-ray diffraction is used for the measurement of the nanocrystalline size.Compared to the electrode of polycrystalline alloys,the property of activation MH9metal hydride)electrode of the alloys with nanometer scale became worse and the inital discharge capacity decreased.It may be ascribed to the decrease of the total amount of rare earth metals and the increase of oxygen on the surface from the analysis of components of the alloys.After heat-treatment,the electrochemical performance of MH electrode of as-spun alloys could be improved,which could be attributed to the alleviation of the lattice strain. 相似文献
5.
JIANG Xiao-yuan DU Feng ZHANG Xu JIA Yan-rong ZHENG Xiao-ming 《浙江大学学报(A卷英文版)》2007,8(11):1839-1845
Using SnxTi1-xO2 as carriers, CuO/Sn0.9Ti0.1O2 and CuO/Sn0.7Ti0.3O2 catalysts with different loading amounts of copper oxide (CuO) were prepared by an impregnation method. The catalytic properties of CuO/Sn0.9Ti0.1O2 and CuO/Sn0.7Ti0.3O2 were examined using a microreactor-gas chromatography (GC) NO CO reaction system and the methods of BET (Brun- auer-Emmett-Teller), TG-DTA (themogravimetric and differential thermal analysis), X-ray diffraction (XRD) and H2-temperature programmed reduction (TPR). The results showed that NO conversions of Sn0.9Ti0.1O2 and Sn0.7Ti0.3O2 were 47.2% and 43.6% respectively, which increased to 95.3% and 90.9% at 6 wt% CuO loading. However, further increase in CuO loading caused a decrease in the catalytic activity. The nitrogen adsorption-desorption isotherm and pore-size distribution curve of Sn0.9Ti0.1O2 and Sn0.7Ti0.3O2 represented type IV of the BDDT (Brunauer, Deming, Deming and Teller) system and a typical mesoporous sample. There were two CuO diffraction peaks (2θ 35.5° and 38.7°), and the diffraction peak areas increased with increasing CuO loading. TPR analysis also detected three peaks (α, β and γ) from the CuO-loaded catalysts, suggesting that the α peak was the reduction of the highly dispersed copper oxide, the β peak was the reduction of the isolated copper oxide, and the γ peak was the reduction of crystal phase copper oxide. In addition, a fourth peak (δ) of the catalysts meant that the SnxTi1-xO2 mixed oxides could be reductive. 相似文献
6.
Surface morphologies of Zr52.5 Al10 Ni10 Cu15 Be12.5 bulk metallic glass after being rolled at both a temperature around T9 and near （ Tx - 50） K were investigated with a scanning electron microscopy. Macroscopic and microscopic observation results show that squamae, cracks, steps and wedges exist on the surface when the samples were rolled at temperatures around Ty. However, a smooth and fiat surface appears when the samples were rolled at temperatures near （ Tx - 50） K. These results indicate that the mode of deformation in the supercooled liquid region is a partially homogeneous flow at a temperature around T9, and a fully homogeneous one at temperatures near （ Tx - 50） K. According to the results, it is more feasible to roll the amorphous alloys at temperatures near （ Tx - 50） K to obtain parts with smooth and fiat surface. 相似文献
7.
Supersaturated solid solutions Fe1-xCx （0≤x≤0.9 ） of wide composition range have been prepared by mechanical alloying process. Nanocrystalline phase was formed for 0 ≤ x ≤ 0.67 and a large grain phase for 0.75 ≤ x ≤ 0.9. The large fraction of graphite volume puts off formation of nanocrystalline phase for high carbon content. In the large grain phase, magnetization follows simple magnetic dilution, and eoereivity He is mainly due to dissolution of carbon at grain boundaries. In the nanocrystalline phase the alloying effect of carbon is revealed by a distinct reduction of average magnetic moment. The increasing lattice constant with increasing carbon content is observed for x ≤ 0.5, suggesting that the high carbon concentration may enhance diffusion of carbon into the Fe lattice. It shows a discontinuity in the Hc variation with a grain size D of nanocrystalline phase. For small grain D below the critical value, Hc increases with D. For a large grain D, Hc decreases with increasing D. The solubility limit of carbon in a-Fe extended by nanocry- stalline phase formation is discussed. 相似文献
8.
α-diketones and β-diketones react with Grignard reagents in the presence of a catalytic amount of Cp2TiCl2 to yield α-ketols and corresponding ketones respectively. Sulfoxides can be deoxygenated by Cp2TiCl2/Al system. The possible mechanisms are also discussed.
Project (No. 20072033) supported by the National Natural Science Foundation of China and the Specialized Research Fund for
the Doctoral Program of Higher Education Ministry, China 相似文献
9.
10.
ZHANG Chun-jie QIAN Rui-rui 《浙江大学学报(A卷英文版)》2007,8(12):2037-2040
In this paper, we shall prove that the Marcinkiewicz integral operator #n, when its kernel Ω satisfies the L^1-Dini condition, is bounded on the Triehel-Lizorkin spaces. It is well known that the Triehel-Lizorkin spaces are generalizations of many familiar spaces such as the Lehesgue spaces and the Soholev spaces. Therefore, our result extends many known theorems on the Marcinkiewicz integral operator. Our method is to regard the Marcinkiewicz integral operator as a vector valued singular integral. We also use another characterization of the Triehel-Lizorkin space which makes our approach more clear. 相似文献
11.
12.
Strain improvement and medium optimization to increase the productivity of spiramycin were carried out. Of oil tolerant mutant
strains screened, one mutant,Streptomyces ambofaciens XC 2–37, produced 9% more spiramycin than the parent strainS. ambofaciens XC 1–29. The effects of soybean oil and propyl alcohol on spiramycin production withS. ambofaciens XC 2–37 were studied. The potency ofS. ambofaciens XC 2–37 was improved by 61.8% with addition of 2% soybean oil in the fermentation medium and 0.4% propyl alcohol at 24 hours
after incubation. The suitable time for feeding propyl alcohol is at 24 hours after incubation in flask fermentation and at
20 hours after incubation in fermentor fermentation. The new process withS. ambofaciens XC 2–37 was scaled up for industrial scale production of spiramycin in a 60 m3 fermentor in Xinchang Pharmaceutical Factory, Zhejiang Medicine Company, Ltd., China, and the potency and productivity of
fermentation were improved by 42.9%. 相似文献
13.
Objective: to explore a new serological method for detectingHelicobacter pylori (H. pylori) infection. Methods: Serum soluble antigen ofH. pylori was detected by using avidin-biotin ELISA technique to evaluate the status ofH. pylori infection and for comparison with rapid urease test (RUT), histologic examination and serology. Results: The sensitivity,
specificity, positive predictive value and negative predictive value were 77.46%, 91.07%, 91.67% and 76.12%, respectively.
The prevalence rate of serumH. pylori soluble antigen in 138 patients undergoing endoscopy was similar to the rate obtained by14C-UBT methods (P>0.05). Conclusions: The detection of serumH. pylori soluble antigen(HpSAg) could be used as a new serological method which is accurate, and convenient, not affected by the memorizing
reaction of serum antibody; is more sensitive, more specific and suitable for clinical diagnosis, and evaluation of eradication
and for follow-up ofH. pylori as well as for detection in children and pregnant women.
Project supported by Zhejiang Provincial Health Bureau (No. 2000A118), China 相似文献
14.
Cui Yu-jian Ge Hong-liang Han Yan-bing Jia Guang-qiang Wang Xin-yan Cao Yi-gang Zhang Jin-cang 《浙江大学学报(A卷英文版)》2004,5(5):603-608
Systematic studies of the transport properties of La0.67Ca0.33Mn1?xFe x O3 (x=0–0.3) systems showed that with increasing Fe-doping contentx the resistance increases and the insulator-metal transition temperature moves to lower temperature. For small doping content, the transport property satisfies metal transport behavior below the transition temperature, and above the transition temperature it satisfies the small polaron model. This behavior can be explained by Fe3+ doping, which easily forms Fe3+?O2??Mn4+ channel, suppressing the double exchange Mn3+?O2??Mn4+ channel and enhancing the spin scattering of Mn ions induced by antiferromagnetic clusters of Fe ions. 相似文献
15.
16.
17.
18.
Kostal 《Zeitschrift für Hochschulrecht, Hochschulmanagement und Hochschulpolitik: zfhr》2008,7(1):29-30
§ 27 Abs. 4 der Satzung der Universit?t X- Satzungsteil Studienrecht (Satzung) r?umt zwar das Recht ein, eine Betreuerin/einen
Betreuer ihrer Dissertation auszuw?hlen; dieses Recht ist jedoch auf die Auswahl auf die "zur Verfügung stehenden" Betreuerinnen/Betreuer
eingeschr?nkt und besteht auch in Ansehung dieses Personenkreises nur "nach Ma?gabe der M?glichkeiten". 相似文献
19.
20.
This paper describes the preparation and properties of TiNx-SiO2 double-layered antireflective(AR) coatings that were applied with print process. The coating material was analyzed and TiNx was used instead of TiO2 as high refractive material. The influence of solution concentration on AR property was studied. The testing result shows that the coatings using print process are featured with excellent mechanical property and the AR property is comparable to American Southwall AR product. It is expected that the study would promote the industrialization progress in AR coatings. 相似文献