首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 984 毫秒
1.
在圆柱形介质谐振器天线单元分析的基础上,设计了一种4单元介质谐振器天线阵列。天线阵采用微带线馈电网络,保证单元之间满足相位匹配关系,使该天线阵列具有良好的定向辐射特性,而且在带宽方面满足要求。  相似文献   

2.
基于工作频率在1.79GHz的矩形微带天线,利用FDTD进行建模和仿真,设计出几种平面阵列天线。针对三角阵和矩形阵,分别计算了它们的远场辐射方向图,讨论了阵列天线单元分布的影响,对比分析了微带阵列天线的主要性能参数,计算了前后比和波瓣宽度,并得出了结论。仿真实验结果表明,和三角阵相比,使用4元矩形阵能提供较高的增益和较低的栅瓣电平。  相似文献   

3.
采用HFSS10电磁场仿真软件设计和仿真了一种新型宽频带双层微带贴片天线,本文中天线采用聚四氟乙烯和空气两层介质,通过增加空气介质层的厚度,同时利用圆形金属电容片补偿馈电探针引起的电感,对微带天线进行耦合馈电,仿真结果表明天线的阻抗带宽达到了23%(VSWR≤2),从而实现了宽频带微带天线的设计.  相似文献   

4.
《滁州学院学报》2021,(2):26-30
利用能量最优传输效率理论对贴片天线进行组阵,并提出一款八单元阵列天线,该阵列天线可以覆盖28GHz通信频段,且天线单元与单元之间具有较高的隔离度,经过计算可使得该阵列天线的波束朝着设定的目标方向偏转,利用能量最优传输效率理论设计的阵列天线在目标方向上的增益比单个贴片天线有着显著的提升与改善。  相似文献   

5.
构建直线阵列、圆阵列和平面阵列天线的数学模型并推导其阵因子表达式,借助Matlab对3种不同类型的阵列天线方向图进行仿真研究。对比阵元数、波长、阵元间距等参数对不同类型阵列天线方向图的影响,仿真结果表明:直线阵、平面阵的性能与阵元数、阵元间距呈正相关,与波长呈负相关;圆阵的性能与阵元数呈正相关,而与圆阵半径和波长的关系并不是线性的。  相似文献   

6.
设计了一种用共面波导馈电的双频天线,由切角的矩形和等腰梯形结构组合而成,使天线工作在2.32~2.57GHz和5.2~5.8 GHz频段。仿真和实测结果表明:采用共面波导馈电使天线辐射的远场方向图有更好的对称性,这种天线工作频段内S11参数小于-10 d B,电压驻波比小于1.5,相对工作带宽达到52%,可应用于无线局域网通信中。  相似文献   

7.
为提高圆形微带贴片天线的性能,提出将一种新型圆柱电磁带隙(EBG)结构应用于天线中,这种柱形EBG基片由两种不同周期单元组成,分别是金属环和接地过孔,形成一种辐射状的圆形周期结构.首先设计了一个圆形微带贴片天线,然后应用电磁仿真软件HFSS对两种周期结构的参数进行了优化分析,最后对加载EBG结构前后微带贴片天线的辐射方向图和回波损耗进行了比较.结果表明,在阻抗匹配良好的前提下,天线增益增强了4.6dB左右,提高了天线的应用性.  相似文献   

8.
《实验技术与管理》2020,(1):145-148
设计了基于虚拟仿真的LTE阵列天线与传播模型创新实验平台,利用该平台既可实现阵列天线的基本原理和经典无线传播模型的基础验证性实验内容,也可以利用平台提供的二次开发功能,将学生自主设计的模型算法运用于LTE网络的区域覆盖规划,并通过仿真实际场景的覆盖效果对算法模型进行优化。该实验激发了学生的创新意识,提高了学生的创新能力。  相似文献   

9.
介绍了粒子群优化算法的基本原理;给出了基于这种进化计算技术的阵列天线方向图综合方法;对粒子群优化算法和遗传算法的特点进行了对比研究,同时对基本粒子群优化算法提出了一种改进策略。研究表明,粒子群优化算法是一种稳定性好,易于实现并行计算的优化算法,在阵列天线方向图综合中具有良好的应用前景。  相似文献   

10.
微带缝隙天线在移动通信、卫星通信、广播电视等方面有着广泛的应用,但是由于它属于谐振天线,所以很难在宽频带工作.国内外的研究主要集中在缩小天线的体积、增加天线的带宽,采取的主要方法是改变缝隙与馈电微带的形状、调整缝隙与馈电微带之间的相对位置.  相似文献   

11.
为了适应全球卫星定位系统的需要,采用多层重叠的贴片结构,设计了一种双频圆极化天线。其中上层贴片为圆形,下层为矩形,利用开槽技术分别在1.618GHz和2.49GHz频段处实现了圆极化,并且通过在下层贴片的四条边上分别开设矩形槽达到了缩小天线尺寸的目的。同时采用单点同轴馈电,实现了良好的阻抗匹配性能。  相似文献   

12.
A low-sidelobe circularly-polarized (CP) microstrip patch array for 2.4 GHz radio frequency identification (RFID) readers is presented. The antenna array with a Chebyshev current distribution is composed of 6 microstrip elements. The CP operation is obtained by the quasi-square patch with difference in lengths of the two sides. The antenna has been investigated numerically and experimentally. Measured results show that the array has a Chebyshev pattern with the sidelobe level of -23 dB, the half-power beamwidth of 16° and an impedance bandwidth (S11 ≥-10 dB) of 130 MHz, which is suitable for RFID reader applications.  相似文献   

13.
1 Introduction Incommunicationsystemapplications ,microstripantennashaveattractedmuchinterestduetotheirlightweightandlowcost.Possibledesignsfordual frequencymicrostripantennasincludedual modedual frequencypatchantennas,multi patchstructuresandreactively loadedpatchantennas,etc[1,5] .Theor thogonal modedual frequencypatchantennasprovidenosimilarradiatingpatternsofthetwooperatingfre quencies .Themulti patchstructureaddstothecom plexityinboththeoreticalanalysisandmanufacturing .Loadingthemicro…  相似文献   

14.
This paper presents a new design of dual polarized aperture-coupled printed antenna array,The finite-difference time-do-main(FDTD) analysis of an aperture-coupled microstrip element is performed,and the effects of antenna parameters on ist characteristics are obtained to guide the design of the printed array,Then an 8^2 dual polarized array design in X-band is introduced with configuration plots,In order to improve its isolation and cross polarization.an outphase-displacement feeding technique is adopted in the feed network.Also,the round bends are used instead of conventional right-angle bends so as to acieve better VSWR performance,Experimental results are presented.indicating the validity of the design.This dual polarized array can be applied as a sub-array of paceborne SAR systems.  相似文献   

15.
INTRODUCTION Metamaterials are periodic metallic structures exhibiting unique properties not existing in natural materials. They are also called backward wave mate- rials, double negative materials, or left-handed mate- rials (LHM) in particular, in which the vectors E, H and k form a left-handed system. Since the idea pro- posed by Veselago (1968), metamaterials have at- tracted great interest in the last years (Smith et al., 2000; Pendry, 2000; Smith and Kroll, 2000; Shelby et al., …  相似文献   

16.
用于通信的超宽带印刷天线   总被引:1,自引:1,他引:1  
1IntroductionUltra-wideband(UWB)microwave antennas are ofinterest for a variety of applications such as electroniccountermeasure,transient radars,mine detection,andunexploded ordnance(UXO)location and identifica-tion.In the early2002,the release of the UWB forcommercial communications by the Federal Communi-cation Commission(FCC,USA)sparked renewed in-terest in the subject of UWB antennas.Conventional UWB antennas such as log-periodic orspiral antennas exhibit good UWB characteristi…  相似文献   

17.
主要研究了多带工作的特性,并通过设计矩形贴片微带天线--包含不同数目的并放置在两辐射端的槽, 进行分析. 分析基于MOM仿真软件包, 结论表明一个贴片上有3个槽的天线具有多带特性: 4个振荡频率分别在1. 6, 1. 8, 2. 65, 和4. 83 GHz, 并且具有足够的反射损耗和增益值. 同时证明了带有2对槽的贴片天线(槽分别位于两辐射端)有双带特性, 其振荡频率分别在1. 64和1. 8 GHz, 而且返回损耗和增益值很好.  相似文献   

18.
Antenna is very crucial to radiotelemetry capsules which can measure the physiological parameters of the gastroin- testinal (GI) tract. The objective of this paper is to design a novel spiral slots microstrip patch antenna for the radiotelemetry capsules communicating with external recorder at 915 MHz located in ISM (Industry, Science, and Medical) bands. The microstrip patch antenna is designed and evaluated using the finite-difference time-domain (FDTD) method. Return loss characteristics and the effect of the human body on resonant frequency are analyzed, and the performances of radiation patterns at different positions of the human alimentary tract are also estimated. Finally, specific absorption rate (SAR) computations are performed, and the peak 1-g and 10-g SAR values are calculated. According to the peak SAR values, the maximum delivered power for the designed antenna was found so that the SAR values of the antenna satisfy the ANSI (American National Standards Institute) limitations.  相似文献   

19.
相位量化将引起相控阵天线峰值副瓣电平恶化、波束偏离预定指向等问题,合理选择馈相方法是降低其影响的关键.文中在给出数字馈相通用数学模型的基础上,以二可能值法为例,对四舍五入、完全随机和部分随机等馈相方法进行了蒙特卡洛仿真和分析.仿真结果表明,在完全随机馈相的基础上,部分随机馈相能进一步改善相控阵天线副瓣电平和波瓣指向等关键的波瓣性能指标,并且不明显增加原有馈相方法的运算量,适于在实际应用中加以推广.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号