首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 750 毫秒
1.
The interferences and drivers' maloperations are important factors affecting vehicle driving safety. This paper investigates the problem of authority allocation to weaken the impact of interferences and drivers’ maloperations on the shared steering control system. Based on the parallel framework of the shared steering control system, an extended framework including the upper level and the lower lever is proposed. The lower lever is used to realize the shared steering control, which includes the driver model, trajectory tracking controller and vehicle model. To improve the robustness of the system, the uncertainty of vehicle dynamics parameters is considered in the trajectory tracking controller, including tire cornering stiffness and longitudinal velocity. The upper level is used to calculate the authority level of the driver and controller required by the lower lever, which consists of an authority dynamic allocation model and an authority allocation decision strategy. The role of the authority dynamic allocation model is to calculate the reference allocation level of the driver and controller dynamically. When the driver's operation and vehicle working states are trustworthy, the reference allocation levels of the driver and controller will be followed. Conversely, a decision result will be gained by the authority allocation decision strategy to replace the reference allocation levels, and the sum of the authority levels of the driver and the automation will not be fixed as 1. The simulation results show that the proposed approach can effectively improve vehicle driving safety, anti-interference and reliability, and can effectively reduce the impact of crosswind and driver's maloperation on vehicle safety, and alleviate the driver's operation load.  相似文献   

2.
An Immersion and Invariance [I & I] controller is designed to control the nonlinear lateral vehicle’s motion, using the steering angle as the only input. Similar to most of the lateral vehicle’s dynamics control law, the cornering stiffness parameters are involved in our proposed controller. Because of the tight relation between tire/road properties and the cornering stiffness parameters, they are not available from the outputs of the sensors and therefore, should be estimated for utilizing in the control law. An online data-driven identification is employed for estimating the cornering stiffness parameters. In addition, a robust model-based fault detection and approximation method in the presence of uncertainties via neural networks is presented. The performance of the obtained control law is investigated via simulation tests in different situations and in the presence of the disturbance. Moreover, some validation tests are performed using the CarSim software to show the effectiveness of our algorithm.  相似文献   

3.
This paper simultaneously addresses the parameter/state uncertainties, external disturbances, input saturations, and actuator faults in the handling and stability control for four-wheel independently actuated (FWIA) electric ground vehicles (EGVs). Considering the high cost of the available sensors for vehicle lateral velocity measurement, a robust H∞ dynamic output-feedback controller is designed to control the vehicle motion without using the lateral velocity information. The investigated parameter/state uncertainties include the tire cornering stiffness, vehicle mass, and vehicle longitudinal velocity. The unmodeled terms in the vehicle lateral dynamics model are dealt as the external disturbances. Faults of the active steering system and in-wheel motors can cause dangerous consequences for driving, and are considered in the control design. Input saturation issues for the tire forces can deteriorate the control effects, and are handled by the proposed strategy. Integrated control with active front steering (AFS) and direct yaw moment (DYC) is adopted to control the vehicle yaw rate and sideslip angle simultaneously. Simulation results based on a high-fidelity and full-car model via CarSim-Simulink show the effectiveness of the proposed control approach.  相似文献   

4.
A novel hierarchical coordination control strategy (HCCS) is offered to guarantee the stability of four-wheel drive electric vehicles (4WD-EVs) combining the Unscented Kalman filter (UKF). First, a dynamics model of the 4WD-EVs is established, and the UKF-based estimator of sideslip angle and yaw rate is constructed concurrently. Second, the equivalent cornering stiffness coefficients are jointly estimated to consider the impact of vehicle uncertainty parameters on the estimator design. Afterwards, a HCCS with two-level controller is presented. The sideslip angle and yaw rate are controlled by an adaptive backstepping-based yaw moment controller, and the computational burden is relieved by an improved adaptive neural dynamic surface control technology in the upper-level controller. Simultaneously, the optimal torque distribution controller of hub motors is developed to optimize the adhesion utilization ratio of tire in the lower-level controller. Finally, the proposed HCCS has shown effective improvement in the trajectory tracking capability and yaw stability of the 4WD-EVs under various maneuver conditions compared with the traditional Luenberger observer-based and the federal-cubature Kalman filter-based hierarchical controller.  相似文献   

5.
The study aims to solve the problem of real time tracking and precise landing of unmanned aerial vehicle (UAV) during unmanned surface vehicle (USV) navigation. In this paper, a UAV-USV cooperative tracking and landing control strategy based on nonlinear model predictive control (NMPC) is proposed. Firstly, the UAV-USV heterogeneous intelligent body collaborative system is constructed based on the mathematical model of UAV and USV; secondly, the tracking controller is designed based on NMPC algorithm to ensure that the UAV can track the USV in real time; finally, a UAV-USV cooperative landing control strategy is proposed to realize the heave motion of the USV to the peak vertex, thus, the UAV completes the precise landing with the minimum impact. As the simulation experimental results show, the UAV-USV cooperative tracking and landing control scheme proposed in this paper can provide effective solution against real time tracking and accurate landing of UAV during the navigation of USV.  相似文献   

6.
This paper addresses a robust tube based model predictive control (RTBMPC) strategy for tracking problem of piecewise affine (PWA) linear systems. The core idea of the RTBMPC strategy is to robustly control an uncertain system through its nominal system and an additional feedback term which rejects a bounded additive disturbance. In tracking problem, RTBMPC strategy should be capable to steer the uncertain system to a given setpoint fulfilling the constraints. But if the setpoint changes, the controller may not success due to the loss of feasibility of the optimization problem. This paper employs several novel features to deal with tracking problem. First, the tracking problem is converted into the regulation problem by introducing an extra system called regulation nominal system that its constraints are translated from tracking into regulation. It leads to a reduction in complexity of the objective function. Then, the feasibility region is enlarged for given setpoint without increasing the prediction horizon by changing the terminal constraint set at different steps of RTBMPC problem solving. Simulation examples, including two different case studies, are presented to illustrate the effectiveness of the proposed RTBMPC.  相似文献   

7.
Stability and energy consumption have always been important issues in electric vehicle research. Excessive slip energy not only aggravates tire wear, but also consumes energy of electric vehicle. In order to ensure the lateral stability and to reduce the slip energy dissipation of the distributed drive electric vehicle (DDEV) equipped with Mechanical Elastic Wheel (MEW), an integrated framework considering both tire slip energy dissipation and lateral stability control is proposed. The SESC (Slip Energy and Stability Control) is a hierarchical control framework for DDEV with MEW. A PID speed tracking controller and an (Integral Terminal Slide Mode) ITSM controller are designed at the upper-level controller. The ITSM controller can improve the lateral stability of the vehicle by obtaining the desired yaw moment. Speed tracking controller can stabilize the speed of the vehicle and obtain the desired longitudinal force. At the lower-level controller, the brush model of the MEW is proposed to express tire slip energy. In order to reduce the error of the vehicle dynamics and the slip energy dissipation, a mixed objective function including a holistic corner controller (HCC) and a minimum tire slip energy characterization is proposed. The proposed control framework is verified by Carsim and Matlab/Simulink under emergency simulation conditions. The simulation results show that the SESC based method can improve the lateral stability of DDEV with MEW effectively, and has better performance compared with fuzzyPID+AD based method. Meanwhile, the SESC achieves less slip energy than conventional torque distribution method.  相似文献   

8.
A novel offset-free trajectory tracking control strategy is proposed for a hypersonic vehicle under external disturbances and parameter uncertainties. In order to realize the real-time control for the hypersonic vehicle, the predictive control law is divided into the on-line design and off-line design. Unlike general nonlinear disturbance observer-based control which involves designing the disturbance compensation strategy, the influences of the disturbances on the velocity and altitude are attenuated by the direct feedback compensation (DFC). Particularly, the offset-free tracking feature is proved for the output reference signal. Simulations show that the real-time control can be realized for the hypersonic vehicle, the controls and angle of attack are all in their given constraint scopes, and the velocity and altitude can track the given references accurately even under mismatched disturbances.  相似文献   

9.
In this paper, a novel tracking control scheme for continuous-time nonlinear affine systems with actuator faults is proposed by using a policy iteration (PI) based adaptive control algorithm. According to the controlled system and desired reference trajectory, a novel augmented tracking system is constructed and the tracking control problem is converted to the stabilizing issue of the corresponding error dynamic system. PI algorithm, generally used in optimal control and intelligence technique fields, is an important reinforcement learning method to solve the performance function by critic neural network (NN) approximation, which satisfies the Lyapunov equation. For the augmented tracking error system with actuator faults, an online PI based fault-tolerant control law is proposed, where a new tuning law of the adaptive parameter is designed to tolerate four common kinds of actuator faults. The stability of the tracking error dynamic with actuator faults is guaranteed by using Lyapunov theory, and the tracking errors satisfy uniformly bounded as the adaptive parameters get converged. Finally, the designed fault-tolerant feedback control algorithm for nonlinear tracking system with actuator faults is applied in two cases to track the desired reference trajectory, and the simulation results demonstrate the effectiveness and applicability of the proposed method.  相似文献   

10.
In this paper, a hierarchical estimator combined with the nonlinear observer and particle filter (PF) is proposed to accurately estimate the vehicle state and tire forces of distributed in-wheel motor drive electric vehicles (DIMDEVs) when the traditional tire models are not available. The proposed estimator consists of lower and upper layers. The lower layer, i.e. longitudinal tire force nonlinear observer (LTFNO) aims at estimating the longitudinal force based on the available drive/brake torques and rotational speed of wheels. The convergence of LTFNO is proved by the invariant set principle. The upper layer receives these estimated longitudinal tire forces from LTFNO and estimates the vehicle state including lateral tire forces based on an expert model (EM). The designed EM utilizes basic knowledge and rules about tire characteristics to approximate the unknown lateral tire force. The upper estimator combines with EM (EEM) to further improve the accuracy. The EEM takes the modeling errors and disturbances into account and avoids the usage of complex established tire models. Then PF is applied in the upper layer to complete the estimation, which only needs measurable longitudinal/lateral accelerations and yaw rate signals. Finally, the effectiveness of the designed hierarchical estimator is verified by Carsim and Simulink co-simulations. The results show the proposed strategy can accurately estimate the vehicle state and tire forces in real-time.  相似文献   

11.
In this paper, a novel backstepping-based adaptive dynamic programming (ADP) method is developed to solve the problem of intercepting a maneuver target in the presence of full-state and input constraints. To address state constraints, a barrier Lyapunov function is introduced to every backstepping procedure. An auxiliary design system is employed to compensate the input constraints. Then, an adaptive backstepping feedforward control strategy is designed, by which the tracking problem for strict-feedback systems can be reduced to an equivalence optimal regulation problem for affine nonlinear systems. Secondly, an adaptive optimal controller is developed by using ADP technique, in which a critic network is constructed to approximate the solution of the associated Hamilton–Jacobi–Bellman (HJB) equation. Therefore, the whole control scheme consists of an adaptive feedforward controller and an optimal feedback controller. By utilizing Lyapunov's direct method, all signals in the closed-loop system are guaranteed to be uniformly ultimately bounded (UUB). Finally, the effectiveness of the proposed strategy is demonstrated by using a simple nonlinear system and a nonlinear two-dimensional missile-target interception system.  相似文献   

12.
袁伟光 《科技通报》2012,28(4):60-62
利用虚拟样机软件ADAMS/CAR,建立了整车模型和分离路面模型,并在Matlab/Simulink环境下建立了ABS的控制模型。在此基础上对带有ABS的车辆进行了联合仿真,分析其在分离路面上的制动性能,最后与不带ABS车辆的制动性能进行了对比。联合仿真结果表明:带ABS的车辆在制动效果、行驶方向稳定性上具有明显优势,同时也说明了ABS联合仿真具有较高的可行性与有效性,可为ABS的研究提供一定依据。  相似文献   

13.
This work is dedicated to solving the adaptive fuzzy decentralized tracking control issue of large-scale nonlinear systems with full-state constraints. Different with barrier Lyapunov function, the main difference is that a novel nonlinear state-dependent function (NSDF) is introduced to prevent the state constraints being overstepped. Based on NSDF, the necessary feasibility conditions for virtual controllers are completely removed. Then, the prior knowledge of the unknown virtual control coefficients is no longer required since the original system is transformed via the new affine variable. Under the control strategy, three objectives on system performance are achieved: (a) all signals of the closed-loop system are bounded; (b) the subsystem output closely tracks the reference trajectory and original error is ultimately uniformly bounded; (c) the full-state constraints are not violated for all the time. At the end, two simulation examples are shown to verify the effectiveness of the control method.  相似文献   

14.
This paper presents a robust gain-scheduled output feedback yaw stability H∞ controller design to improve vehicle yaw stability and handling performance for in-wheel-motor-driven electric vehicles. The main control objective is to track the desired yaw references by managing the external yaw moment. Since vehicle lateral states are difficult to obtain, the state feedback controller normally requires vehicle full-state feedback is a critical challenge for vehicle lateral dynamics control. To deal with the challenge, the robust gain-scheduled output feedback controller design only uses measurements from standard sensors in modern cars as feedback signals. Meanwhile, parameter uncertainties in vehicle lateral dynamics such as tire cornering stiffness and vehicle inertial parameters are considered and handled via the norm-bounded uncertainty, and linear parameter-varying polytope vehicle model with finite vertices is established through reducing conservative. The resulting robust gain-scheduled output feedback yaw stability controller is finally designed, and solved in term of a set of linear matrix inequalities. Simulations for single lane and double lane change maneuvers are implemented to verify the effectiveness of developed approach with a high-fidelity, CarSim®, full-vehicle model. It is confirmed from the results that the proposed controller can effectively preserve vehicle yaw stability and lateral handling performance.  相似文献   

15.
In this paper, the optimal driving torques of four wheels in an electric vehicle (EV) are obtained by minimizing the losses of four in-wheel motors. In order to slightly change these optimal torques for vehicle stability recovery, a new constrained active front steering (AFS) system is analytically designed and integrated with the torque vectoring (TV) system in a novel decentralized structure. In the proposed structure, the required external yaw moment is applied by the TV controller only when the constrained AFS is filled to capacity determined by a stability index extracted from the nonlinear phase plane analysis. As a result of this integration strategy, the external yaw moment is used as low as possible. Consequently, the torques in electrical motors are used near the optimal values consistent with optimal energy consumption. Comparative simulation studies with the standalone TV are conducted in the CarSim software environment to show the efficiency of the proposed decentralized control structure in terms of energy consumption and stability. Moreover, the suitability of the constrained control method used in the integration structure is shown in comparison with the well-known nonlinear model predictive control method in terms of practical implementation.  相似文献   

16.
In this paper, a new fault tolerant control methodology is proposed for partial loss of control authority in aircraft using piecewise affine (PWA) slab models while minimizing an upper bound on a quadratic cost function. The proposed controller stabilizes and satisfies performance bounds for both the nominal and faulty systems. The controller design criteria are cast as a set of Linear Matrix Inequalities (LMIs) that can be solved efficiently. The new technique is illustrated in a numerical example for the Beechcraft 99 aircraft model.  相似文献   

17.
In this paper, the problem of active fault tolerant control for a reusable launch vehicle (RLV) with actuator fault using both adaptive and sliding mode techniques is investigated. Firstly, the kinematic equations and dynamic equations of RLV are given, which represent the characteristics of RLV in reentry flight phase. For the dynamic model of RLV in faulty case, a fault detection scheme is proposed by designing a nonlinear fault detection observer. Then, an active fault tolerant tracking strategy for RLV attitude control systems is presented by making use of both adaptive control and sliding mode control techniques, which can guarantee the asymptotic output tracking of the closed-loop attitude control systems in spite of actuator fault. Finally, simulation results are given to demonstrate the effectiveness of the developed fault tolerant control scheme.  相似文献   

18.
This paper proposes a new adaptive region tacking control scheme with nonlinear error transformation for underwater vehicles based on barrier Lyapunov functions. In the new scheme, a redefinition of the tracking error is given by introducing nonlinear error transformation in prescribed performance control. Although the results created by the new scheme indicate a slight decrease in the tracking precision, the real tracking error will be still kept within the prescribed performance functions, while the control signals also become smoother, compared with the original prescribed performance control scheme. Then an approximation form of the control input with constraints, together with an improved Nussbaum function, is designed to derive the control law for underwater vehicles with thruster saturation and dead zone. Furthermore, a new velocity error variable is given by introducing an auxiliary variable to compensate the effect from thruster saturation. Finally, it is proved that the nonlinear system is semi-global practical finite-time stable and the tracking error is always kept within the prescribed boundaries. The effectiveness of the proposed region tracking control scheme is validated through simulation-based case studies on an underwater vehicle with measurement noise.  相似文献   

19.
In this work, considering the roll dynamics and actuator dynamics, an observer-based control scheme for a vehicle is proposed. The proposal considers a nonlinear higher order sliding mode observer to estimate unmeasurable lateral velocity, roll angle and roll velocity. Using the observer information, a controller based on block control with sliding mode technique is designed for the reference trajectory tracking of the lateral and yaw velocities of the vehicle. The stability of the complete closed-loop system including zero dynamics is analyzed. The effectiveness of the proposed scheme is demonstrated through CarSim simulations.  相似文献   

20.
This paper describes the application of the genetic algorithm for the optimization of the control parameters in parallel hybrid electric vehicles (HEV). The HEV control strategy is the algorithm according to which energy is produced, used, and saved. Therefore, optimal management of the energy components is a key element for the success of a HEV. In this study, based on an electric assist control strategy (EACS), the fitness function is defined so as to minimize the vehicle engine fuel consumption (FC) and emissions. The driving performance requirements are then considered as constraints. In addition, in order to reduce the number of the decision variables, a new approach is used for the battery control parameters. Finally, the optimization process is performed over three different driving cycles including ECE-EUDC, FTP and TEH-CAR. The results from the computer simulation show the effectiveness of the approach and reduction in FC and emissions while ensuring that the vehicle performance is not sacrificed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号