共查询到20条相似文献，搜索用时 31 毫秒
1.
《文物保护研究》2013,58(2):56-66
AbstractThere is evidence in the literature that in India wood was used for making sculptures from very early times. Owing to the destructive climate, however, only wooden objects dating from the 7th century are available today, while polychromed wooden sculptures of the period before the 16th century are unobtainable. Sculptures were produced either by carving from one solid block or by building it up from small pieces. The main types of decorating were painting, inlay work or lac work. Painting was done sometimes without, but mostly with surface preparation. For this a thin layer of a ground was used. Sometimes a layer of cloth and then paper was used before applying the gesso. Pigments in common use were malachite, terre-verte, red ochre, red lead, lac dye, yellow ochre, chrome yellow, ultramarine, kaolin, and chalk. A gold effect was often produced by applying shellac varnish over shining silvery tin paint or foil. Lac work was produced by painting with lac solution or by turnery. 相似文献
2.
《文物保护研究》2013,58(1):154-157
AbstractThe region of gold deposits in Brazil was discovered by pioneers at the end of the seventeenth century. The richness and the demographic explosion of the new General Mines region (Minas Gerais) gave rise to strong Portuguese political control: religious orders and missionary activities were forbidden there. Consequently, Minas Gerais saw the development of Third Orders and brotherhoods of laymen. The competition between the various religious groups prompted the construction of many churches, the richness of their interior decoration based on the baroque aesthetic. The mother church of Nos sa Senhora da Conceição in Catas Altas is a magnificent example of the contribution of both the Portuguese and the indigenous people to the construction of artistic monuments. The church dates from 1738 and the architectural construction is complete but the internal decoration remains unfinished. This made it possible to study the techniques and materials used. In the areas where the ground has been applied but no polychromy, there is a first layer of kaolin followed by a gesso layer. This unusual technique may have been prompted by economy: kaolin is a mineral easily found in the metallurgical zone of Minas Gerais. 相似文献
3.
Ângela Santos 《文物保护研究》2013,58(4):221-239
ABSTRACTFor centuries, the only painting materials used in stained-glass production were grisaille and yellow (silver) stain. At the end of the fifteenth century, stained-glass painters began to use a new material, sanguine. This paint is mainly produced with iron oxide particles, usually haematite, and allowed to obtain a colour that can vary from yellowish to brownish-red due to the nature and particle size of the iron oxide. A translucent sanguine was mostly applied as flesh and hair colour, with an opaque sanguine used for drapery, architectural motifs, and heraldry. The main goal of this study is to investigate the relationship between historic sources on the preparation and use of sanguine from the fifteenth to the nineteenth centuries and the evolution evidenced in the recipes regarding the production method. Representative recipes from several centuries (sixteenth to nineteenth centuries) were selected and reproduced for this study. These reconstructions were thoroughly characterized using X-ray powder diffraction, optical microscopy (OM), and fibre optic reflectance spectroscopy (FORS). The OM and FORS data were correlated with historic sanguine paints applied on historic stained-glass. The similarities and differences between historic and reconstructed paints are presented. The study of reconstructed sanguine’s adhesion to glass using cross-cut testing was also performed, revealing that the adhesion is strongly influenced, not only by the binder, but also by the composition and morphology of the sanguine paint. 相似文献
4.
A multi-analytical approach for the study of brazilwood and its lake pigments was carried out based on historically accurate reconstructions. Recipes for brazilwood lakes from the fifteenth century technical text Livro de como se fazem as cores and the Winsor & Newton nineteenth century colourman's archive were reproduced and compared. Both primary sources allowed for the successful preparation of brazilwood lake pigments with colours that vary from light pink to dark red. The main steps and ingredients for the manufacture of these pigments were common in both sources, particularly the addition of Al3+ in the form of alum, and calcium carbonate (chalk). Reconstructions revealed that the latter acts as a pH buffer and filler, controlling the pH at which the lake pigment precipitates. The main difference between the two sources is that the nineteenth century recipes give the quantities for all ingredients, the precise temperatures and time, and achieved higher relative pigment yields (75% versus 45%). Full chemical characterisation of the reconstructions provided detailed information on the individual steps in the pigment manufacture and revealed that the presence of calcium sulphate dihydrate (gypsum) in the final pigment was a result of its formation in situ. Infrared, reflectance, and fluorescence spectroscopy proved to be essential and complementary techniques: while infrared was used to characterise additives and binders, reflectance and fluorescence data were fundamental for identifying the chromophore. The pigments and paints produced can now be used as standards for the identification and investigation of brazilwood lake pigments found in artworks. 相似文献
5.
6.
《文物保护研究》2013,58(4):197-204
AbstractThis work combines our observation that the details of marble statues that have already been lost from the calcite surface are preserved in the gypsum layer, with our research on the mechanism of marble sulfation, to lead to a consolidation of the gypsum, transforming it back to calcium carbonate (calcite) using carbonate ions in solution. Our research shows the mechanism of the conversion of gypsum to calcite, the rate determining steps being the desorption and diffusion of CO2?3 We found that the reproduction of the surface detail and the improvement of the mechanical properties was very satisfactory. 相似文献
7.
8.
《文物保护研究》2013,58(3):149-153
AbstractA broth containing the sulfate reducing bacterium Desulfovibrio desulfuricans was used to treat samples of reagent calcium sulfate, gypsum-rock specimens, fragments from a marble monument with a black weathering crust rich in gypsum, and a marble monument with similar crust. Calcite was found to have formed on all treated surfaces suggesting that this microbe has the potential to clean crusted marble monuments whilst also regenerating calcite, the parent mineral of the marble. 相似文献
9.
10.
Leszek Krzemień Michał Łukomski Łukasz Bratasz Roman Kozłowski Marion F. Mecklenburg 《文物保护研究》2016,61(6):324-330
The drying shrinkage accumulation from exposure of freshly prepared gesso layers to relative humidity (RH) cycles was determined to elucidate the mechanism of craquelure pattern formation on panel paintings. The progresive drying shrinkage of the gesso is observed only under the cycles going to high RH levels which bring about transitions from brittle to ductile state of the material. The first incidence of fracture on the gesso layers occurred after a limited number of cycles ranging between a few and 100 for a range of layer thickness between 0.5 and 1?mm. The craquelure patterns stabilised also after a limited number of cycles (30 for the 1-mm thick layer). Upon increase in the gesso layer thickness, the strength of the layer is reduced and the spacing of shrinkage fractures increases. The study demonstrated that craquelure patterns, mimicking historical ones, can be realistically produced in laboratory conditions. Such studies would provide useful information for preparing specimens simulating historic panel paintings and would inform the current efforts on automatic, computer-aided classifications of crack formations on paintings. 相似文献
11.
《文物保护研究》2013,58(3):185-193
AbstractThe two Stangengläser, tall cylindrical vessels from the beginning of the seventeenth century, are described in detail. The severely damaged Stangengläser, decorated with diamond-point engraving and cold-painting, were challenging to treat. Research preceding the conservation revealed differences in decorating techniques. Samples of the paint layers were analyzed using micro-Fourier transform infrared spectroscopy. Two layers of resinous varnish with a middle layer of paint containing a plant gum were found on the Stangenglas with Allegory of Caritas and Zierotin coat of arms. In the plain paint layer of the Stangenglas with dancing couples, egg white was identified as the binder. The glasses, analyzed using scanning electron microscopy with energy dispersive X-ray spectrometry, had similar potash–lime–silica compositions, which seems to be characteristic for glass from Bohemian lands. Results of analysis contributed to the discussion about the possible provenance of the Stangengläser, the glassworks at Wilhelmberg, South Bohemia. 相似文献
12.
《文物保护研究》2013,58(4):293-300
AbstractThis paper is concerned with the rediscovery of a technique of interior wall decoration known as Escariola which was introduced by Austrian and Italian immigrants to the mid-west region of the state of Santa Catarina (southern Brazil) at beginning of the twentieth century. This coating provides a refined, attractive and durable finishing. Historical investigation combined with sample characterization using X-ray diffractometry (XRD) and differential thermal and thermogravimetric analyses (DTA/TGA) revealed that this technique consists of the application on a rendered masonry wall of a 2–3 mm thick layer of slaked lime/white cement paste which is subsequently polished with talcum powder. Samples of Escariola paste were empirically reformulated and tested on a rendered masonry wall. Guidelines for producing Escariola are proposed here. 相似文献
13.
An assemblage of Buddhist wall paintings and sculptures dating to the twelfth/early thirteenth century are found distributed over the interiors of the temple complex at Sumda Chun, Ladakh. Detailed investigations carried out as part of a conservation project shed light on their antiquity and production technology. The sculptures are constructed with fine mud mortar applied over a wooden armature and affixed to the walls without any support from the ground. In both the sculptures and wall paintings, the paint layer is applied over a thin gypsum ground that functions as a white colourant where unpainted. For the paint layer, azurite, vermilion, and orpiment are the dominant mineral pigments utilized. Minium (red lead) has been used for preparatory drawings and as paint. Highlighting of special areas was achieved using a laminate of tin–lead alloy and gold on relief. Overall the material and techniques employed in the execution of the wall paintings and sculptures are consistent with those reported for other early sites in the region. 相似文献
14.
ABSTRACTPanel paintings are essentially wooden boards painted on one side. Due to the vapor resistance of the paint layer, changing ambient conditions lead to exchange of moisture on only one surface. Subsequently, a non-uniform moisture content profile is formed across the thickness of the board. As a result, differential expansion causes the board to bend in case of no mechanical restriction, or it leads to a build-up of stresses inside the material if restrained. Experiments with oak boards sealed on one side and exposed to a change in the ambient relative humidity (RH) were performed. By scaling, the response of any board with different thickness can be predicted. Since the bending of the board can be described as a linear system behavior, the frequency response can be predicted based on the step response. In combination with critical strains for wood and gesso from the literature, this gives insight into allowable RH fluctuations in terms of frequency and amplitude for different board thicknesses. 相似文献
15.
《文物保护研究》2013,58(4):149-154
AbstractThe small areas of white metallic pigment seen on the south wall of J. M. Whistler's ‘Peacock Room’ in the Freer Gallery of Art are platinum; this has been used, with a yellow-brown ground, to overpaint a preceding layer of silver which, in one place only, is over a preceding layer of gold. The yellow metallic pigment is confirmed as gold and the blue colour of the south wall and elsewhere is based on Prussian blue. On a separate wood panel a green was tentatively identified as copper resinate, and iron-oxide-based pigments appear to be present. In all areas investigated a white, used as a ground and in admixture, was essentially lead white and calcium carbonate. The significance of these results is discussed briefly. 相似文献
16.
Pigments on a figurative wall painting in Poudeh village, central Iran, were analysed by micro X-ray fluorescence spectrometry, micro Raman spectroscopy, scanning electron microscopy coupled with energy dispersive X-ray spectrometry, micro Fourier transform infrared spectroscopy, X-ray diffractometry, and polarised light microscopy. Red lead, ultramarine blue, chrome yellow, brass powder, white huntite, and lammerite (Cu3(AsO4)2) were identified as red, blue, yellow, golden, white, and green pigments, respectively, while gypsum and barite were used as extender. In addition, glushinskite (MgC2O4·2H2O) was identified as a deterioration product of white huntite. Moreover, several analytical studies suggested that lammerite was a degradation product of emerald green (Cu(CH3COO)2·3Cu(AsO2)2) originally used as green pigment in the painting. The formation of lammerite is suggested to be due to the migration of arsenic throughout the paint layer. Based on the pigments identified, the wall painting is dated from the mid-nineteenth century to the mid-twentieth century. 相似文献
17.
《文物保护研究》2013,58(3):183-186
AbstractA yellowish copper vanadate mineral has been found in Swedish mural paintings from the fifteenth century. Small patches occur in malachite-green paint. Thirteen samples from five churches have been analyzed by optical and scanning electron microscopy with energy–dispersive X-ray spectrometry, transmission electron microscopy, X-ray powder diffraction, and polarized light microscopy. The substance is evidently the rather uncommon mineral volborthite, with the chemical formula Cu3V2O7(OH)2.2H2O. Very small quantities have also been noted for another mineral, presumably calcio-volborthite, CaCu(VO4)(OH), also named tangeite. The results show that the conservator should always be observant for pigments not earlier noticed or reported. There are some old mines in Central Europe, e.g. in Germany, which contain malachite as well as copper vanadate minerals, and this is probably the origin of the yellow patches in the paintings. 相似文献
18.
Birgit Angelika Schmidt Martin Andreas Ziemann Simone Pentzien Toralf Gabsch Werner Koch Jörg Krüger 《文物保护研究》2016,61(2):113-122
A great number of Central Asian wall paintings, archeological materials, architectural fragments, and textiles, as well as painting fragments on silk and paper, make up the so called Turfan Collection at the Asian Art Museum in Berlin. The largest part of the collection comes from the Kucha region, a very important cultural center in the third to ninth centuries. Between 1902 and 1914, four German expeditions traveled along the northern Silk Road. During these expeditions, wall paintings were detached from their original settings in Buddhist cave complexes. This paper reports a technical study of a wall painting, existing in eight fragments, from the Buddhist cave no. 40 (Ritterhöhle). Its original painted surface is soot blackened and largely illegible. Grünwedel, leader of the first and third expeditions, described the almost complete destruction of the rediscovered temple complex and evidence of fire damage. The aim of this case study is to identify the materials used for the wall paintings. Furthermore, soot deposits as well as materials from conservation interventions were of interest. Non-invasive analyses were preferred but a limited number of samples were taken to provide more precise information on the painting technique. By employing optical and scanning electron microscopy, energy dispersive X-ray spectroscopy, micro X-ray fluorescence spectroscopy, X-ray diffraction analysis, and Raman spectroscopy, a layer sequence of earthen render, a ground layer made of gypsum, and a paint layer containing a variety of inorganic pigments were identified. 相似文献
19.
ABSTRACTThis research reports for the first time the inclusion of Oryza sativa straw, root, and husk as a vegetal additive in the fifth century CE decorative mud plaster of the Buddhist cave of Bezeklik. The investigation is based on the morphological, anatomical, and silica bodies study of the vegetal additives accomplished through a light microscope, stereomicroscope, Fourier-transform infrared spectrophotometer, and scanning electron microscope from the isolated fragments of the painted plaster, transported to India in the nineteenth century and presently housed in National Museum, New Delhi. Studies indicate that loamy sand soil sourced locally for the earthen plaster was mixed with paddy straw in the proportion of 25–30% by volume for cohesion and strength. The excess of sand and absence of clay-size particles in plaster is, however, causing disaggregation of the grains due to lack of cohesion. As locally available materials are preferably used for any plaster works, this study also raises the question – was ancient Bezeklik, now a desert of Northwest China, once a rice-growing area in addition to the crops of Triticum aestivum (wheat), Setaria italica (Foxtail millet), and Hordeum vulgare (barley) reported by many researchers, based on hypothetical environment recreation. This study will help prepare a compatible plaster for the restoration of fragile-painted plaster fragments. 相似文献
20.
《文物保护研究》2013,58(4):145-161
AbstractFor the study of Italian paintings and their techniques the examination of the binding media (glue, egg, oil) has considerable importance, but with the usual scientific methods of analysis the results have never been conclusive. Each sample may include more than one layer of paint and many constituents; egg yolk alone contains protein, oils, cholesterol. In the present project, in order to identify these diverse materials and also to eliminate interference from contamination (glue, wax or oil) used in later restoration processes, it was decided to mount original paint samples, including a bit of the ground, as cross-sections in a polyester resin embedding material and then to make the constituents visible under the microscope by using selective staining techniques. Only in this way could the foreign materials be distinguished from the original and the structure of the original layers be understood. Finally, other tests such as the fluorescent antibody technique and thin-layer chromatography could be applied to confirm the results of the staining. In removing over 500 specimens fronl paintings in the Walters Art Gallery precautions were taken to assure sample authenticity, and during the testing at the University of Michigan careful methods of standardization and control were devised, using both fresh and old samples of egg tempera and oil. Two stains, Ponceau S for protein and Sudan Black B for oil, provided the most workable means of identifying the binding media in the majority of the samples studied. A final report will have to await correlation of the material, but certain observations may be made at this stage: (a) 14th century, in primarily tempera paintings a limited use of oil was found associated with a specific green pigment, copper resinate; (b)15th century, the majority of the paintings were entirely of egg tempera, but layers containing oil in the underpainting or in the above-mentioned copper green occurred more frequently; (c)16th century, egg tempera was not replaced by oil, but both were used in a complex layering technique, the media varying layer by layer and area by area; (d)17th century, the mixed technique gradually declined, but egg tempera continued to be associated with the painting of flesh and occasional highlights. 相似文献