共查询到20条相似文献，搜索用时 15 毫秒
1.
BackgroundBiomineralization is a significant process performed by living organisms in which minerals are produced through the hardening of biological tissues. Herein, we focus on calcium carbonate precipitation, as part of biomineralization, to be used in applications for environmental protection, material technology, and other fields. A strain GM-1, Microbacterium sp. GM-1, isolated from active sludge, was investigated for its ability to produce urease and induce calcium carbonate precipitation in a metabolic process.ResultsIt was discovered that Microbacterium sp. GM-1 resisted high concentrations of urea up to 60 g/L. In order to optimize the calcification process of Microbacterium sp. GM-1, the concentrations of Ni2 + and urea, pH value, and culture time were analyzed through orthogonal tests. The favored calcite precipitation culture conditions were as follows: the concentration of Ni2 + and urea were 50 μM and 60 g/L, respectively, pH of 10, and culture time of 96 h. Using X-ray diffraction analysis, the calcium carbonate polymorphs produced by Microbacterium sp. GM-1 were proven to be mainly calcite.ConclusionsThe results of this research provide evidence that Microbacterium sp. GM-1 can biologically induce calcification and suggest that strain GM-1 may play a potential role in the synthesis of new biominerals and in bioremediation or biorecovery. 相似文献
2.
Hemant Kumar Ashok Kumar Poonam Kumari N. B. Tulsani 《Indian journal of clinical biochemistry : IJCB》2000,15(2):124-127
We have developed a biostrip for determination of urea in serum. The test strip is based on enzymatic assay where urease has
been immobilized on the chromatographic paper along with chromogen, phenol red. The chromogen is easily soluble in water and
does not require other components for the color change. Serum urea reacts with urease and water to liberate ammonia and carbon
dioxide. The liberated ammonia changes the pH of the reaction medium, which is monitored by the chromogen phenol red. A single
step working reagent strip has been developed and the reaction is completed within 50 seconds at room temperature. With this
test strip urea concentration is measured in serum as low as 0.15 g/L. The speed and convenience of determining urea in serum
by this strip instantly makes it well suited for individuals, physicians and emergency centres. 相似文献
3.
BackgroundBioremoval of phenolic compounds using fungi and bacteria has been studied extensively; nevertheless, trinitrophenol bioremediation using modified Oscillatoria cyanobacteria has been barely studied in the literature.ResultsAmong the effective parameters of bioremediation, algal concentration (3.18 g·L−1), trinitrophenol concentration (1301 mg·L−1), and reaction time (3.75 d) were screened by statistical analysis. Oscillatoria cyanobacteria were modified by starch/nZVI and starch/graphene oxide in a bubble column bioreactor, and their bioremoval efficiency was investigated. Modifiers, namely, starch/zero-valent iron and starch/GO, increased trinitrophenol bioremoval efficiency by more than 10% and 12%, respectively, as compared to the use of Oscillatoria cyanobacteria alone.ConclusionsIt was found that starch/nano zero-valent iron and starch/GO could be applied to improve the removal rate of phenolic compounds from the aqueous solution.How to cite: Bavandi R, Emtyazjoo M, Saravi HN, et al. Study of nano-structure zero-valent iron and graphene-oxid capability onbioremoval of trinitrophenol from wastewater in a bubble column bioreactor. Electron J Biotechnol 2019;39. https://doi.org/10.1016/j.ejbt.2019.02.003. 相似文献
4.
BackgroundFructose and single cell protein are important products for the food market. Abundant amounts of low-grade dates worldwide are annually wasted. In this study, highly concentrated fructose syrups and single cell protein were obtained through selective fermentation of date extracts by Saccharomyces cerevisiae.ResultsThe effect of air flow (0.1, 0.5, 0.75, 1, 1.25 and 1.5 vvm) and pH (4.5, 4.8, 5, 5.3 and 5.6) was investigated. Higher air flow led to lower fructose yield. The optimum cell mass production of 10 g/L was achieved at air flow of 1.25 vvm with the fructose yield of 91%. Similar cell mass production was obtained in the range pH of 5.0–5.6, while less cell mass was obtained at pH less than 5. Controlling the pH at 4.5, 5.0 and 5.3 failed to improve the production of cell mass which were 5.6, 5.9 and 5.4 g/L respectively; however, better fructose yield was obtained.ConclusionsExtension of the modified Gompertz enabled excellent predictions of the cell mass, fructose production and fructose fraction. The proposed model was also successfully validated against data from literatures. Thus, the model will be useful for wide application of biological processes.How to cite: Putra MD, Abasaeed AE, Al-Zahrani SM. Prospective production of fructose and single cell protein from date palm waste. Electron J Biotechnol 2020;48. https://doi.org/10.1016/j.ejbt.2020.09.007. 相似文献
5.
BackgroundThe potential waste canola oil-degrading ability of the cold-adapted Antarctic bacterial strain Rhodococcus sp. AQ5-07 was evaluated. Globally, increasing waste from food industries generates serious anthropogenic environmental risks that can threaten terrestrial and aquatic organisms and communities. The removal of oils such as canola oil from the environment and wastewater using biological approaches is desirable as the thermal process of oil degradation is expensive and ineffective.ResultsRhodococcus sp. AQ5-07 was found to have high canola oil-degrading ability. Physico-cultural conditions influencing its activity were studied using one-factor-at-a-time (OFAT) and statistical optimisation approaches. Considerable degradation (78.60%) of 3% oil was achieved by this bacterium when incubated with 1.0 g/L ammonium sulphate, 0.3 g/L yeast extract, pH 7.5 and 10% inoculum at 10°C over a 72-h incubation period. Optimisation of the medium conditions using response surface methodology (RSM) resulted in a 9.01% increase in oil degradation (87.61%) when supplemented with 3.5% canola oil, 1.05 g/L ammonium sulphate, 0.28g/L yeast extract, pH 7.5 and 10% inoculum at 12.5°C over the same incubation period. The bacterium was able to tolerate an oil concentration of up to 4.0%, after which decreased bacterial growth and oil degradation were observed.ConclusionsThese features make this strain worthy of examination for practical bioremediation of lipid-rich contaminated sites. This is the first report of any waste catering oil degradation by bacteria originating from Antarctica.How to cite: Ibrahim S, Zahri KNM, Convey P, et al. Optimisation of biodegradation conditions for waste canola oil by cold-adapted Rhodococcus sp. AQ5-07 from Antarctica. Electron J Biotechnol 2020;48. https://doi.org/10.1016/j.ejbt.2020.07.005 相似文献
6.
BackgroundNonribosomal peptide synthases (NRPS) can synthesize functionally diverse bioactive peptides by incorporating nonproteinogenic amino acids, offering a rich source of new drug leads. The bacterium Escherichia coli is a well-characterized production host and a promising candidate for the synthesis of nonribosomal peptides, but only limited bioprocess engineering has been reported for such molecules. We therefore developed a medium and optimized process parameters using the design of experiments (DoE) approach.ResultsWe found that glycerol is not suitable as a carbon source for rhabdopeptide production, at least for the NRPS used for this study. Alternative carbon sources from the tricarboxylic acid cycle achieved much higher yields. DoE was used to optimize the pH and temperature in a stirred-tank reactor, revealing that optimal growth and optimal production required substantially different conditions.ConclusionsWe developed a chemically defined adapted M9 medium matching the performance of complex medium (lysogeny broth) in terms of product concentration. The maximum yield in the reactor under optimized conditions was 126 mg L-1, representing a 31-fold increase compared to the first shaking-flask experiments with M9 medium and glycerol as the carbon source. Conditions that promoted cell growth tended to inhibit NRPS productivity. The challenge was therefore to find a compromise between these factors as the basis for further process development.How to cite: Oestreich AM, Suli LI, Gerlach D. et al. Media development and process parameter optimization using statistical experimental designs for the production of nonribosomal peptides in Escherichia coli. Electron J Biotechnol 2021;52. https://doi.org/10.1016/j.ejbt.2021.05.001 相似文献
7.
BackgroundPlastic waste is a serious problem because it is difficult to degrade, thereby leading to global environment problems. Poly(lactic acid) (PLA) is a biodegradable aliphatic polyester derived from renewable resources, and it can be degraded by various enzymes produced by microorganisms. This study focused on the scale-up and evaluated the bioprocess of PLA degradation by a crude microbial enzyme produced by Actinomadura keratinilytica strain T16-1 in a 5 L stirred tank bioreactor.ResultsPLA degradation after 72 h in a 5 L bioreactor by using the enzyme of the strain T16-1 under controlled pH conditions resulted in lactic acid titers (mg/L) of 16,651 mg/L and a conversion efficiency of 89% at a controlled pH of 8.0. However, the PLA degradation process inadvertently produced lactic acid as a potential inhibitor, as shown in our experiments at various concentrations of lactic acid. Therefore, the dialysis method was performed to reduce the concentration of lactic acid. The experiment with a dialysis bag achieved PLA degradation by weight loss of 99.93%, whereas the one without dialysis achieved a degradation of less than approximately 14.75%. Therefore, the dialysis method was applied to degrade a commercial PLA material (tray) with a conversion efficiency of 32%, which was 6-fold more than that without dialysis.ConclusionsThis is the first report demonstrating the scale-up of PLA degradation in a 5 L bioreactor and evaluating a potential method for enhancing PLA degradation efficiency.How to cite: Panyachanakul T, Sorachart B, Lumyong S, et al. Development of biodegradation process for Poly(DL-lactic acid) degradation by crude enzyme produced by Actinomadura keratinilytica strain T16-1. Electron J Biotechnol 2019;40. https://doi.org/10.1016/j.ejbt.2019.04.005 相似文献
8.
BackgroundEthanol concentration (PE), ethanol productivity (QP) and sugar consumption (SC) are important values in industrial ethanol production. In this study, initial sugar and nitrogen (urea) concentrations in sweet sorghum stem juice (SSJ) were optimized for high PE (≥ 10%, v/v), QP, (≥ 2.5 g/L·h) and SC (≥ 90%) by Saccharomyces cerevisiae SSJKKU01. Then, repeated-batch fermentations under normal gravity (NG) and high gravity (HG) conditions were studied.ResultsThe initial sugar at 208 g/L and urea at 2.75 g/L were the optimum values to meet the criteria. At the initial yeast cell concentration of ~ 1 × 108 cells/mL, the PE, QP and SC were 97.06 g/L, 3.24 g/L·h and 95.43%, respectively. Repeated-batch fermentations showed that the ethanol production efficiency of eight successive cycles with and without aeration were not significantly different when the initial sugar of cycles 2 to 8 was under NG conditions (~ 140 g/L). Positive effects of aeration were observed when the initial sugar from cycle 2 was under HG conditions (180–200 g/L). The PE and QP under no aeration were consecutively lower from cycle 1 to cycle 6. Additionally, aeration affected ergosterol formation in yeast cell membrane at high ethanol concentrations, whereas trehalose content under all conditions was not different.ConclusionInitial sugar, sufficient nitrogen and appropriated aeration are necessary for promoting yeast growth and ethanol fermentation. The SSJ was successfully used as an ethanol production medium for a high level of ethanol production. Aeration was not essential for repeated-batch fermentation under NG conditions, but it was beneficial under HG conditions.How to cite: Sriputorn B, Laopaiboon P, Phukoetphim N, et al. Enhancement of ethanol production efficiency in repeated-batch fermentation from sweet sorghum stem juice: Effect of initial sugar, nitrogen and aeration. Electron J Biotechnol 2020;46. https://doi.org/10.1016/j.ejbt.2020.06.001 相似文献
9.
BackgroundThe determination of kinetic parameters and the development of mathematical models are of great interest to predict the growth of microalgae, the consumption of substrate and the design of photobioreactors focused on CO2 capture. However, most of the models in the literature have been developed for CO2 concentrations below 10%.ResultsA nonaxenic microalgal consortium was isolated from landfill leachate in order to study its kinetic behavior using a dynamic model. The model considered the CO2 mass transfer from the gas phase to the liquid phase and the effect of light intensity, assimilated nitrogen concentration, ammonium concentration and nitrate concentration. The proposed mathematical model was adjusted with 13 kinetic parameters and validated with a good fit obtained between experimental and simulated data.ConclusionsGood results were obtained, demonstrating the robustness of the proposed model. The assumption in the model of DIC inhibition in the ammonium and nitrate uptakes was correct, so this aspect should be considered when evaluating the kinetics with microalgae with high inlet CO2 concentrations.How to cite: Saldarriaga L F, Almenglo F, Ramírez M, et al. Kinetic characterization and modeling of a microalgae consortium isolated from landfill leachate under a high CO2 concentration in a bubble column photobioreactor. Electron J Biotechnol 2020;44. https://doi.org/10.1016/j.ejbt.2020.01.006. 相似文献
10.
BackgroundTriclosan (TCS) is an antimicrobial agent widely used in health care and consumer products. This compound is present in sludge of wastewater treatment plants (WWTPs), and because of its bactericidal characteristics, it can inhibit the methanogenic activity in anaerobic digestion (AD) technology. The aim of this study was to evaluate the toxic effects of TCS on the methanogenic activity.ResultsBatch anaerobic reactors were used with TCS concentrations of 7.8, 15.7, 23.5, and 31.4 mg/L. These assays consisted in three successive feedings (I, II, and III), wherein the sludge was exposed to each TCS concentration and volatile fatty acid (VFA) substrate. For evaluation of the residual sludge activity during feeding III, only VFA was used. The results showed that the increase in TCS concentrations correlated with the reduction in methane (CH4) production. In this case, the minimum values were achieved for TCS concentration of 31.4 mg/L with CH4 levels between 101.9 and 245.3 during feedings I, II, and III. Regarding the effect of TCS on VFA consumption, an inhibitory effect was detected for TCS concentrations of 23.5 and 31.4 mg/L, with concentrations of acetic, butyric, and propionic acids at the end of the assay (37 d) between 153.6 and 206.8, 62.5 and 60.1, and 93.4 and 110 mg/L, respectively. Regarding the removal of TCS during AD, these values were above 47%.ConclusionTCS is an inhibitor of methanogenic activity with a decrease between 63 and 70% during the different feedings. The CH4 production was not recovered during feeding III, with inhibition percentages of 21–72%.How to cite: Reyes-Contreras C, Leiva AM, Vidal G. Evaluation of triclosan toxic effects on the methanogenic activity. Electron J Biotechnol 2019;39. https://doi.org/10.1016/j.ejbt.2019.03.006. 相似文献
11.
BackgroundRemoval of dyes from wastewater by microorganisms through adsorption, degradation, or accumulation has been investigated. Biological methods used for dye treatment are generally always effective and environmentally friendly. In this study, biosorption of the Fast Black K salt azo dye by the bacterium Rhodopseudomonas palustris 51ATA was studied spectrophotometrically, at various pH (2–10), temperatures (25°C, 35°C, and 45°C) and dye concentrations (25–400 mg L-1).ResultsThe bacterial strain showed extremely good dye-removing potential at various dye concentrations. IR studies at different temperatures showed that the dye was adsorbed on the bacterial surface at lower temperatures. Characteristics of the adsorption process were investigated by Scatchard analysis at 25°C and 35°C. Scatchard analysis of the equilibrium binding data for the dye on this bacterium gave rise to linear plots, indicating that the Langmuir model could be applied. The regression coefficients obtained for the dye from the Freundlich and Langmuir models were significant and divergence from the Scatchard plot was observed.ConclusionThe adsorption behavior of the dye on this bacterium was expressed by the Langmuir, Freundlich, and Temkin isotherms. The adsorption data with respect to various temperatures provided an excellent fit to the Freundlich isotherm. However, when the Langmuir and Temkin isotherm models were applied to these data, a good fit was only obtained for the dye at lower temperatures, thus indicating that the biosorption ability of R. palustris 51ATA is dependent on temperature, pH, and dye concentration.How to cite: Öztürk A, Bayol E, Abdullah MI. Characterization of the biosorption of fast black azo dye K salt by the bacterium Rhodopseudomonas palustris 51ATA strain. Electron J Biotechnol 2020;46. https://doi.org/10.1016/j.ejbt.2020.05.002. 相似文献
12.
Matthew J. Kennedy Harold D. Ladouceur Tiffany Moeller Dickson Kirui Carl A. Batt 《Biomicrofluidics》2012,6(4)
The present work describes the operation and simulation of a microfluidic laminar-flow mixer. Diffusive mixing takes place between a core solution containing lipids in ethanol and a sheath solution containing aqueous buffer, leading to self assembly of liposomes. Present device architecture hydrodynamically focuses the lipid solution into a cylindrical core positioned at the center of a microfluidic channel of 125 × 125-μm2 cross-section. Use of the device produces liposomes in the size range of 100–300 nm, with larger liposomes forming at greater ionic strength in the sheath solution and at lower lipid concentration in the core solution. Finite element simulations compute the concentration distributions of solutes at axial distances of greater than 100 channel widths. These simulations reduce computation time and enable computation at long axial distances by utilizing long hexahedral elements in the axial flow region and fine tetrahedral elements in the hydrodynamic focusing region. Present meshing technique is generally useful for simulation of long microfluidic channels and is fully implementable using comsol Multiphysics. Confocal microscopy provides experimental validation of the simulations using fluorescent solutions containing fluorescein or enhanced green fluorescent protein. 相似文献
13.
BackgroundAt present, cellulases are the most important enzymes worldwide, and their demand has been increasing in the industrial sector owing to their notable hydrolysis capability.ResultsIn the present study, contrary to conventional techniques, three physical parameters were statistically optimized for the production of cellulase by thermophilic fungi by using response surface methodology (RSM). Among all the tested thermophilic strains, the best cellulase producing fungus was identified as Talaromyces thermophilus – both morphologically and molecularly through 5.8S/ITS rDNA sequencing. The central composite design (CCD) was used to evaluate the interactive effect of the significant factors. The CCD was applied by considering incubation period, pH, and temperature as the model factors for the present investigation. A second-order quadratic model and response surface method revealed that the independent variables including pH 6, temperature 50 °C, and incubation period 72 h significantly influenced the production of cellulases. The analysis of variance (ANOVA) indicated that the established model was significant (P ≤ 0.05) and showed the high adequacy of the model. The actual and predicted values of CMCase and FPase activity showed good agreement with each other and also confirmed the validity of the designed model.ConclusionsWe believe the present findings to be the first report on cellulase production by exploiting Kans grass (Saccharum spontaneum) as a substrate through response surface methodology by using thermophilic fungus, Talaromyces thermophilus.How to cite: Abdullah R, Tahseen M, Nisar K et al. Statistical optimization of cellulases by Talaromyces thermophilus utilizing Saccharum spontaneum, a novel substrate. Electron J Biotechnol 2021;51. https://doi.org/10.1016/j.ejbt.2021.03.007. 相似文献
14.
BackgroundAmmonium stress is a prime limiting phenomenon that occurs during methane formation from poultry manure. It is caused by elevated ammonium nitrogen concentrations that result from substrate decomposition. The amounts of methane formed depend on the activity of methanogenic microbes.ResultsDuring the research reported in this paper, the response of a mesophilic consortium inhabiting a biogas reactor to rising load of poultry manure was investigated. The taxonomic composition of bacterial population was mostly typical, however syntrophic bacteria were not detected. This absence resulted in limitation of succession of some methanogenic microorganisms, especially obligate hydrogenotrophs. The methanogenic activity of the consortium was totally dependent on the activity of Methanosaeta. Inhibition of methanoganesis was noticed at ammonium nitrogen concentration of 3.68 g/L, total cessation occurred at 5.45 g/L. Significant amounts of acetic acid in the fermentation pulp accompanied the inhibition.ConclusionsThe effectiveness of the consortium was totally dependent on the metabolic activity of the acetoclastic Methanoseata genus and lack of SAOB did not allow hydrogenotrophic methanogens to propagate and lead to cessation of biogas production at an elevated ammonium concentration at which acetoclastic methanogens were inhibited.How to cite: Świątek M, Lewicki A, Szymanowska D, et al. The effect of introduction of chicken manure on the biodiversity and performance of an anaerobic digester. Electron J Biotechnol 2019;37. https://doi.org/10.1016/j.ejbt.2018.11.002. 相似文献
15.
BackgroundBiologically active peptides produced from fish wastes are gaining attention because their health benefits. Proteases produced by halophilic microorganisms are considered as a source of active enzymes in high salt systems like fish residues. Hence, the aim of this study was the bioprospection of halophilic microorganisms for the production of proteases to prove their application for peptide production.ResultsHalophilic microorganisms were isolated from saline soils of Mexico and Bolivia. An enzymatic screening was carried out for the detection of lipases, esterases, pHB depolymerases, chitinases, and proteases. Most of the strains were able to produce lipases, esterases, and proteases, and larger hydrolysis halos were detected for protease activity. Halobacillus andaensis was selected to be studied for proteolytic activity production; the microorganism was able to grow on gelatin, yeast extract, skim milk, casein, peptone, fish muscle (Cyprinus carpio), and soy flour as protein sources, and among these sources, fish muscle protein was the best inducer of proteolytic activity, achieving a protease production of 571 U/mL. The extracellular protease was active at 50°C, pH 8, and 1.4 M NaCl and was inhibited by phenylmethylsulfonyl fluoride. The proteolytic activity of H. andaensis was used to hydrolyze fish muscle protein for peptide production. The peptides obtained showed a MW of 5.3 kDa and a radical scavenging ability of 10 to 30% on 2,2-diphenyl-1-picrylhydrazyl and 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) and a ferric reducing ability of plasma.ConclusionThe use of noncommercial extracellular protease produced by H. andaensis for biologically active peptide production using fish muscle as the protein source presents a great opportunity for high-value peptide production.How to cite: Delgado-García M, Flores-Gallegos AC, Kirchmayr M, et al. Bioprospection of proteases from Halobacillus andaensis for bioactive peptide production from fish muscle protein. Electron J Biotechnol 2019;39. https://doi.org/10.1016/j.ejbt.2019.03.001. 相似文献
16.
BackgroundFoods including probiotics are considered “functional foods.” As an alternative to dairy products, we investigated the behavior of Lactobacillus casei when exposed to low-pH fruit juice. Juices of fruits such as pineapple, raspberry, and orange were assessed. Free and microencapsulated forms of L. casei were compared, and the viability of the probiotic was evaluated under storage at 4°C for 28 d. Microbiological analyses were carried out to ensure a safe and healthy product for consumers who look for foods with probiotics from sources other than dairy.ResultsLow pH affected L. casei survival during storage depending on the type of fruit juice. In the case of pineapple juice, some microcapsules were broken, but microcapsules recovered at the end of the storage period had 100% viability (2.3 × 107 CFU/g spheres). In the case of orange juice, more than 91% viability (5.5 × 106 CFU/g spheres) was found. In raspberry juice, viability decreased rapidly, disappearing at the end of the storage period, which was caused by the absorption of high concentrations of anthocyanin inside microcapsules more than low pH.ConclusionLow pH affected the survival of L. casei under refrigeration; even when they were microencapsulated, acidic conditions impacted their viability. Although pH affects viability, its value is very sensitive and will depend on the type of fruit juice and its composition. Some fruit juices contain compounds used as substrates for Lactobacillus and other compounds with antimicrobial effects.How to cite: Olivares A, Soto C, Caballero E, et al. Survival of microencapsulated Lactobacillus casei (prepared by vibration technology) in fruit juice during cold storage. Electron J Biotechnol 2019;42. https://doi.org/10.1016/j.ejbt.2019.10.002. 相似文献
17.
BackgroundBiosurfactants are surface active molecules produced by microorganisms which have the ability to disrupt the plasma membrane. Biosurfactant properties are important in the food, pharmaceutical and oil industries. Lactic acid bacteria can produce cell-bound and excreted biosurfactants.ResultsThe biosurfactant-producing ability of three Lactobacillus strains was analyzed, and the effects of carbon and nitrogen sources and aeration conditions were studied. The three species of lactobacillus evaluated were able to produce biosurfactants in anaerobic conditions, which was measured as the capacity of one extract to reduce the surface tension compared to a control. The decreasing order of biosurfactant production was L. plantarum>Lactobacillus sp.>L. acidophilus. Lactose was a better carbon source than glucose, achieving a 23.8% reduction in surface tension versus 12.9% for glucose. Two complex nitrogen sources are required for growth and biosurfactant production. The maximum production was reached at 48 h under stationary conditions. However, the highest level of production occurred in the exponential phase. Biosurfactant exhibits a critical micelle concentration of 0.359 ± 0.001 g/L and a low toxicity against E. coli. Fourier transform infrared spectroscopy indicated a glycoprotein structure. Additionally, the kinetics of fermentation were modeled using a logistic model for the biomass and the product, achieving a good fit (R2 > 0.9).ConclusionsL. plantarum derived biosurfactant production was enhanced using adequate carbon and nitrogen sources, the biosurfactant is complex in structure and because of its low toxicity could be applied to enhance cell permeability in E. coli.How to cite: Montoya Vallejo C, Florez Restrepo MA, Guzmán Duque FL, et al. Production, characterization and kinetic model of biosurfactant produced by lactic acid bacteria. Electron J Biotechnol 2021;53. https://doi.org/10.1016/j.ejbt.2021.06.001 相似文献
18.
BackgroundThere is a large amount of industrial wastewater produced by the mushroom industry during the canning processing each year, which could provide abundant carbon, nitrogen and inorganic salts for microbial growth. The aim of this study was to optimize the culture conditions for Bacillus licheniformis cultured in the Agaricus bisporus industrial wastewater to produce the agricultural microbial fertilizer.ResultsIn this work, the maximal biomass of B. licheniformis could be obtained under the following culture conditions: 33.7°C, pH 7.0, 221 rpm shaking speed, 0.5% wastewater, 2 (v:v, %) inoculum dose, loading liquid of 60 mL/250 mL and a culture time of 24 h, and the average experimental value obtained was 1.35 ± 0.04 × 109 Obj/mL, which was within the 95% confidence interval of the predicted model (1.29–1.38 × 109 Obj/mL), and met the national microbial fertilizers' standard in China. Furthermore, the field experiment results showed that the fermentation broth of B. licheniformis could significantly improve the yield of Anoectochilus roxburghii.ConclusionsAgaricus bisporus industrial wastewater can be used to produce agricultural microbial fertilizer.How to cite: Huang J, Huang A, Lu L, et al. Improving the yield of Anoectochilus roxburghii by Bacillus licheniformis cultured in Agaricus bisporus industrial wastewater. Electron J Biotechnol 2020;48. https://doi.org/10.1016/j.ejbt.2020.08.002. 相似文献
19.
BackgroundThe increasing rate of breast cancer globally requires extraordinary efforts to discover new effective sources of chemotherapy with fewer side effects. Glutaminase-free l-asparaginase is a vital chemotherapeutic agent for various tumor malignancies. Microorganisms from extreme sources, such as marine bacteria, might have high l-asparaginase productivity and efficiency with exceptional antitumor action toward breast cancer cell lines.Resultsl-Asparaginase-producing bacteria, Bacillus velezensis isolated from marine sediments, were identified by 16S rRNA sequencing. l-Asparaginase production by immobilized cells was 61.04% higher than that by free cells fermentation. The significant productivity of enzyme occurred at 72 h, pH 6.5, 37°C, 100 rpm. Optimum carbon and nitrogen sources for enzyme production were glucose and NH4Cl, respectively. l-Asparaginase was free from glutaminase activity, which was crucial medically in terms of their severe side effects. The molecular weight of the purified enzyme is 39.7 KDa by SDS-PAGE analysis and was ideally active at pH 7.5 and 37°C. Notwithstanding, the highest stability of the enzyme was found at pH 8.5 and 70°C for 1 h. The enzyme kinetic parameters displayed Vmax at 41.49 μmol/mL/min and a Km of 3.6 × 10−5 M, which serve as a proof of the affinity to its substrate. The anticancer activity of the enzyme against breast adenocarcinoma cell lines demonstrated significant activity toward MDA-MB-231 cells when compared with MCF-7 cells with IC50 values of 12.6 ± 1.2 μg/mL and 17.3 ± 2.8 μg/mL, respectively.ConclusionThis study provides the first potential of glutaminase-free l-asparaginase production from the marine bacterium Bacillus velezensis as a prospect anticancer pharmaceutical agent for two different breast cancer cell lines.How to cite: Mostafa Y, Alrumman S, Alamri S, et al. Enhanced production of glutaminase-free L-asparaginase by marine Bacillus velezensis and cytotoxic activity against breast cancer cell lines. Electron J Biotechnol 2019;42. https://doi.org/10.1016/j.ejbt.2019.10.001. 相似文献
20.
BackgroundPyruvic acid (PA), a vital α-oxocarboxylic acid, plays an important role in energy and carbon metabolism. The oleaginous yeast Yarrowia lipolytica (Y. lipolytica) has considerable potential for the production of PA. An increased NaCl concentration reportedly increases the biomass and PA yield of Y. lipolytica.ResultsTo increase the yield of PA, the NaCl-tolerant Y. lipolytica A4 mutant was produced using the atmospheric and room temperature plasma method of mutation. The A4 mutant showed growth on medium containing 160 g/L NaCl. The PA yield of the A4 mutant reached 97.2 g/L at 120 h (0.795 g/g glycerol) in a 20-L fermenter with glycerol as the sole carbon source, which was 28.9% higher than that of the parental strain.ConclusionThe PA yield from Y. lipolytica can be improved by increasing its NaCl tolerance.How to cite: Yuan W, Lin X, Zhong S, et al. Enhanced pyruvic acid yield in an osmotic stress-resistant mutant of Yarrowia lipolytica. Electron J Biotechnol 2020;44. https://doi.org/10.1016/j.ejbt.2020.01.002. 相似文献