首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The paper presents the use of laser radiation for cleaning of beeswax treated granite stone. In the early sixties, prestigious restorers decided to apply molten beeswax on the granite surface of valuable monuments with the aim of preventing the erosive action of atmospheric agents. An interesting example of this treatment is the Renaissance Frieze in the Cloister of the Cathedral of Santiago de Compostela in Galicia (Northwest Spain). With time, salt accumulation beneath the beeswax layer has caused an intense surface disintegration of granite. Conventional cleaning methods can destroy sculptured details of these emblematic monuments. For this reason, excimer laser cleaning has been chosen as a promising non contact, selective and environmentally friendly cleaning technique to be studied.The cleaning tests have been carried out using an excimer laser (ArF, 193 nm), with fluences between 0.5 and 2 J cm−2 pulse−1 and a spot area of 0.025 cm2. Samples representing beeswax films over Roan granite have been irradiated and their degree of cleaning has been studied as a function of the number of pulses and the laser fluence.Cleaning efficiency has been evaluated by FT-Raman Spectroscopy, allowing to establish the beeswax ablation threshold and the ablation rate.Excimer laser cleaning allows a progressive and controlled removal of a few tenths of micrometers of beeswax per pulse without damaging the underlying granite stone.  相似文献   

2.
Laser removal of surface contaminants on silver threads was carried out using Nd:YAG laser radiations from near infrared (1064 nm) through visible (532 nm) to ultraviolet (266 nm) produced by frequency harmonic generation. The thread in the museum textile was made of silver and silk in which the silver ribbon wraps the bunch of silk fibres. The goal of this work is to find a feasibility to clean the tarnished silver without any damage of the underlying silk since the conventional chemical treatment is problematic to apply in this specific specimen. From the results, it was found that the laser wavelength of 266 nm is most appropriate to clean the silver surface without causing any damage either to the silver or the silk surfaces while 1064 nm wavelength easily causes damages such as melting and burning to the silver as well as the silk inside.  相似文献   

3.
Potentials and limitations of the near-UV pulsed laser cleaning of parchment (wavelength 308 nm, pulse duration 17 ns) are demonstrated by the application of scanning electron microscopy (SEM), colour metrics and diffuse reflectance infrared Fourier transform spectroscopy (DRIFT) at model contamination/pigment/parchment systems. Pigment-binder systems stable and unstable against near-UV laser treatment could be identified. A chemical degradation threshold fluence of a goat parchment model substrate was determined which practically coincided with its ablation threshold fluence. This indicates that the fluence range of destructionless laser cleaning at 308 nm is almost not impaired by chemical modfications below the ablation limit. Nevertheless, spectroscopic diagnostics are necessary to guarantee destructionless cleaning for practical cases where the chemical conversion threshold fluence deviates from the ablation threshold to lower values.  相似文献   

4.
  相似文献   

5.
The microgravity method is one of the geophysical tools used in engineering and environmental and archaeological researches, where the detection of subsurface cavities or buried structures is essential. In this study, this technique has been revealed to be an efficient and respectful tool for use in Cultural Heritage restoration studies, such as those carried out in the restoration of historical sites in which the elements to be examined are beneath a shallow coating of material. Therefore, the aim of this microgravimetric survey is to define the exact position and dimensions of a subsurface structure (rainwater cistern) through microgravity response of the medium.For this purpose, the subsurface structure of San Gerónimo Cloister of the Vall de Crist Carthursian Monastery (14th century) has been researched. This monastery was known to be the largest Carthusian Monastery in the region of Valencia (Spain) and one of the most remarkable of the ancient Corona de Aragón. A rectangular grid of microgravity measurement station points was designed to cover the entire surface of the cloister. In addition, a microgravimetric profile was acquired along a hillside close to the Carthusian buildings in order to obtain the density value of the medium.The study was performed using a LaCoste&Romberg D203 gravimeter to detect and to map the shallow subsurface rainwater cistern that probably exits beneath it. This gravimeter has a sensitivity of approximately 1 μgal (μgal = 1.10−8 ms−2) and an accuracy of 3–5 μgal for relative gravity measurements.Two contour maps were calculated (observed gravity and Bouguer gravity values) in order to improve the interpretation results. On these maps we can observe the shape of the body that is causing the perturbation in gravity values. And what is more, it led us to deduce that the central area of the cavity is deeper than the border area. In addition, we can asses that the cavity is 8 m wide and 12 m long, and is symmetrical along its longitudinal axis, but not along its transversal axis.Also, a microgravimetric inversion was performed and the subsurface is split into 7 prisms and the depth and height of each is to be estimated separately. As a result of this inversion we can estimate that the ceiling of the cistern is located about 1 m under the cloister pavement and the cistern floor at a depth of 4 m. The cistern is slightly inclined towards one of its edges by about 20 cm.Finally, the 2D modelling derived by microgravimetric data has allowed us to determinate the shape, dimensions and location of the cistern accurately. In addition we have calculated the cistern capacity (288 m3, that is, 2880 Hl). This capacity was quite enough for the water necessities of 13 monks who lived there permanently, even for making it through the drought periods frequent in this kind of Mediterranean areas.  相似文献   

6.
Acetic and formic acid vapors emitted from woodwork in historical organs are very important corrosive agents for lead pipes. These acids are slowly released from the wood both during playing and when the pipes are silent. To inhibit this emission process, the wood surface can be modified, by creating a protective layer with alkaline features. However, a coating of wood is not recommended since this could modify the appearance and create a layer not perfectly compatible with the substrate. For this reason, we propose to use some innovative nanotechnology that has been successfully applied for the deacidification of wood samples coming from the Vasa shipwreck. Application of calcium (or magnesium) hydroxide nanoparticles, with sizes ranging from 30–150 nm, allowed a homogeneous distribution of particles through the surface layer of wood simply by soaking (or spraying) it in a alcoholic (or mixed with less polar solvents) dispersion of nanoparticles. Nanoparticles do not modify the wood appearance and distribute randomly within the first layers of wood. The small size of particles accounts for the high reactivity with CO2 from the air, to give the alkaline reserve of carbonates that provide high efficacy in the neutralization of gaseous acids. The emission of volatile organic compounds (VOC) from the treated wood was determined by using an emission test cell, Field and Laboratory Emission Cell (FLEC). The results show that the emissions of acetic acid vapor from nanoparticles treated wood was very low (< 70 μg/m2 h) during the first 13 month. In contrast, untreated wood emitted high concentrations of acetic acid vapor (200–400 μg/m2 h).  相似文献   

7.
Assessment of multi-leaf stone masonry in earthquake-prone areas is mostly related to the evaluation of its texture, morphology, leaf detachment and structural cracking due to previous seismic activity, as well as disintegration due to material deterioration. For the plastered masonry with heritage or artistic value (paintings, frescoes etc.), both the type of structure and the extent of damage should be characterized with minimal interference to the structure, which could be overcome solely by non-destructive testing (NDT). However, due to the complexity of plastered multi-leaf masonry structure, the performance of well-known NDT methods could be significantly worsened. Therefore, as a prerequisite for applying NDT on multi-leaf stone masonry in practice, a validation process should be carried out. In this study, complementary ground penetrating radar (GPR) and infrared (IR) thermography measurements on plastered laboratory three-leaf stone masonry walls were performed. Apart from assessing the wall texture and morphology with the type of connection between the leaves, detection of gradual plaster delamination and crack propagation while subjecting the walls to an in-plane cyclic shear test was taken into account. The results showed that GPR could successfully visualize header stones passing through the whole depth of the specimen. The masonry texture behind the plaster could be well resolved by both methods, although GPR near-field effects worsened its localisation. For the detection of plaster delamination, IR thermography outperformed GPR by detecting delamination as small as 2 mm as well as structural crack patterns, whereas GPR only detected delamination larger than 8 mm. It was shown that the performance of both methods for defect detection could be further improved by image fusion based on unsupervised clustering methods.  相似文献   

8.
The application of lasers for the removal of superficial deposits from historic stained glass is a comparatively new field of scientific interest. Experimental studies concerning the behaviour of glass substrates and the corresponding superficial deposits towards different laser wavelengths were carried out. The experiments were performed using wavelengths of λ = 193 nm (ArF-Excimer), 308 nm (XeCl-Excimer), 355 nm (Nd:YAG third harmonic) and 1 064 nm (Nd:YAG fundamental) in comparison to λ = 248 nm (KrF-Excimer). This comparison is due to the fact that the present knowledge is based on the 248 nm wavelength. Specially prepared model glass samples representing the original fragments and samples of organic polymers (formerly used as a protective material for historic stained glasses) were used to study the effects of laser radiation and were subsequently characterised by optical microscopy.  相似文献   

9.
Salt crystallization is a major cause of damage in porous materials such as stone, brick and ceramics. The paper reports results of an analytical study on tiles of glazed ceramics that are seriously damaged by acetate salt crystallization. Measurements of the ionic composition of the salt mixture in the tiles and in the efflorescences were carried out. Based on the available information on the phase equilibria in the system comprising of the main constituents chloride, nitrate, acetate, calcium and sodium, the crystallization pathways of the various solid phases are traced. It is shown that a combination of qualitative XRD analysis of the phases present in the efflorescences together with a quantitative determination of the ionic composition is sufficient for the quantitative analysis of major crystalline species in the efflorescences, i.e. Ca3(CH3COO)3Cl(NO3)2 · 7H2O, thecotrichite, and NaCl, halite. The concentrations of these salts are obtained from a solution of the mass balance by least squares analysis. Their formation from the salt mixtures present in the tiles that are subject to acetic acid vapor attack is consistent with the solubility diagram of the above mentioned quinary system. Finally, the possibilities of preventive conservation of salt contaminated ceramics in typical museum environments are discussed.  相似文献   

10.
This study is aimed at an assessment of the properties of two polymeric products applied to Norway spruce (Picea abies) and White poplar (Populus alba) wood species. It contributes to ongoing research experiments on the consolidating properties of two synthetic resins and their potential synergic action on wood, resulting from their different interaction with the substrate: Paraloid B72 and Regalrez 1126. Experiments were carried out on a series of samples of the two wood varieties. The consolidants were applied alone and one after the other, with one coat of Regalrez and then one of Paraloid. Porosity and variations in pore size distribution were ascertained by mercury intrusion porosimetry (MIP). Colorimetric and IR spectroscopic measurements were also taken before and after aging by solar radiation and freeze/thaw cycles, to verify the possible slowing of photodegradation of the treated wood and the consolidating resistance. Results confirm that both products penetrate the wood with a different behaviour. After double treatment with Regalrez + Paraloid, a significant advantage was observed in terms of mechanical resistance and pore size distribution, although no advantages as regards resistance to photo-oxidizing processes or colour changes were observed.  相似文献   

11.
Lasers have served as cleaning tools for historical objects and artworks for about 40 years. In many cases, superior results of laser cleaning were achieved with respect to traditional methods. In this technique, contaminations on the surface of the object are ablated by laser irradiation. In order to apply laser cleaning method to fragile materials such as paper made of cellulose or parchment, heat deposition to the bulk should be minimal, to prevent damage. In this work, it is demonstrated that laser pulses with femtosecond (fs) duration can exhibit non-thermal ablation of contaminants on paper samples. In particular, laser cleaning studies are concentrated on paper samples with sizing. Fs laser cleaning is performed on artificially soiled and aged samples, as well as on historical ones. The laser used in the experiments has pulse duration of 550 fs and 1030 nm center wavelength. The fluence of the laser is varied and the post-cleaning statuses of samples are investigated. The analyses are color changes, fiber integrity, chemical composition changes and mechanical strengths. These results show that fs lasers can be very efficient in cleaning paper samples, yielding minimal discoloration and no damage to fibers distinguishable on microscopic examination. The presence of sizing also provides further protection against possible side effects.  相似文献   

12.
Two multivariate statistical tools – principal components analysis and cluster analysis – were applied to aid in the interpretation of the historical development of St. John the Baptist's church (?i?e, Slovenia). With these methods it was possible to distinguish between the types of mortar used in the Romanesque and Gothic time periods. The investigated structure is a ruin with poorly preserved fragments of historical mortars, so tracing the individual stages of its construction proved to be a demanding task. Its chemical composition was determined by inductively coupled plasma mass spectrometry (ICP-MS) and the results of the content of various oxides were statistically evaluated to interpret the age of the southern wall of the church.  相似文献   

13.
This work reports mainly the results of an X-ray Absorption Spectroscopy (XAS) study carried out on coloured glass tesserae from the palaeo-Christian mosaic which decorated the votive chapel of St. Prosdocimus (Padova) until its replacement with the current frescoes of Renaissance age, and which is one of the only two known mosaics in the Veneto region (Italy). The study aims at clarifying how the different local structure, oxidation state and quantity of copper influenced colour. Analysis of high-resolution Cu-K edge X-ray Absorption Near Edge Structure (XANES) and Extended X-ray Absorption Fine Structure (EXAFS) spectra showed that copper is present as cuprite (Cu2O) in orange samples and as metallic copper in red and brown ones. These phases are responsible for both the colour and opacity of the samples. In addition, Cu1+ ions linked to the oxygen atoms of the glass framework were identified in ratios of about 60% and 30% of total copper in orange and red/brown samples, respectively. In blue and green samples, copper is dispersed in the glass matrix as a mixture of Cu1+ and Cu2+ ions, and no crystalline phases are visible. In this context, the Cu1+ and Cu2+ contents in glass were also quantified thanks to suitable standards, demonstrating that, when Cu2+ is the main chromophorous ion, colour intensity is directly correlated to its content in the glass. In particular, in green and blue samples, coloured by copper, Cu2+ content varies from 26% to 56% of total copper, and the higher contents of Cu2+ are shown by more intensely coloured samples. It should be stressed here that the green colour of the analysed tesserae is given by the physical interaction of blue colour, due to Cu2+ ions, and yellow colour, due to Pb antimonates used as opacifiers.  相似文献   

14.
One of the major causes of pathologies in our historic buildings is the presence of moisture, particularly rising damp. Since these constructions tended to be built near water lines, to facilitate their supply, and because their walls are mainly made of high porosity materials, the presence of rising damp is constant. Although many historic buildings in Portugal have already been the targets of interventions to eliminate pathologies, the fact is that it has not been possible to do it properly. The treatment techniques available nowadays are quite diverse but all of them have low applicability to historic constructions. Research has been carried out, in this past years, at the Department of Civil Engineering of the University of Coimbra in collaboration with Department of Civil Engineering of the Faculty of Engineering of the University of Porto to try and solve this problem. An old but poorly studied technique has been investigated experimentally and numerically in the past few years: ventilation of the base of the walls. It was experimentally validated to limestone walls 20 cm thick. Numerical investigation has been carried out in order to analyze the influence of different parameters on its efficiency. In this paper we present the results of the latest investigations that have been carried out about the influence of the size of the ventilation channel on its efficiency.  相似文献   

15.
The methodology of protecting the European stained glass windows against environmental risk (e.g. meteorological factors, air pollution, microorganisms) by means of an external glazing is not new. In spite of many scientific studies carried out in the last 20 years, some questions were still up for discussion. The European VIDRIO (2002–2005) project gave an answer to these questions. The research carried out by the different project partners established a new multidisciplinary approach aimed at evaluating the efficiency of the protective glazing systems and their effects on stained glass windows conservation, and finally at assessing the most appropriate strategy to preserve stained glass windows. Scientific results showed that the so-called isothermal glazing (i.e. ventilation by the air coming from the inside of the building) protected efficiently the ancient stained glass window from environmental attack (i.e. rain, pollutants, condensation, thermal shocks) with very limited secondary effects. The scientific research highlighted that its efficiency was strongly related to the technical design of the protective system. In particular, the ventilation and the size of the interspace had to be carefully considered. The research developed within the VIDRIO project was turned into general recommendations to the owners and practitioners on the best practice for the stained glass windows future conservation.  相似文献   

16.
Via Appia, built around 312 BC, is an engineering masterpiece, its most striking feature being the segment between Colle Pardo and Terracina, which goes “straight” for about 61 km. We investigate this segment by GPS techniques: results lead to uncover that the original project of the road was based on a complex interplay between geometry and astronomy. The project was indeed carried out with the help of an orthogonal centuriation grid, with all probabilities starting from a node located at the south easternmost point of the grid itself. The road however does not run along the grid's diagonal: it was orientated astronomically to the setting of the star Castor at the time of construction. Since the Gemini twins were patrons of the Roman army, the project turns out to be a work entertained for both practical and symbolic reasons, during a key moment of the Roman history.  相似文献   

17.
‘Marmor Misium’ was one of the most used granites of antiquity, especially for the manufacture of columns and slabs. It was quarried in the area of Kozak (Turkey) and used locally from the Late Hellenistic period and later, probably at the end of the 1st century AD, exported to Rome and other important Roman towns of the Mediterranean sea. It seems that ‘Marmor Misium’ continued to be quarried until the Early Byzantine time; it is now still quarried for local use (road paving, etc.). In spite of its historical importance and geological interest, this granite has never been the subject of detailed petrological studies. That is why in this work it has been sampled from various outcrops of the plutonite and in abandoned ancient quarries and characterised petrographically and geochemically. From the petrographic point of view, the plutonites of Kozak are medium-grained biotite-hornblende granite and granodiorite composed of 34.2–53 % (modal) zoned plagioclase, 23.7–35.4 % K-feldspar, 21.4–29 % anhedral quartz, 4.9–10 % brown biotite and 7.7 % green hornblende. These rocks are I-type metaluminous granitoids of high-k calc-alkaline orogenic series forming a crystallised body at a depth of about 10 km. The positive distinction between ‘Marmor Misium’ and two other granites used in antiquity and macroscopically very similar to it, those from the Elba and Giglio islands (Italy), is easily made by considering the absence of hornblende, the peraluminous character and the lower Sr and Ba and higher Rb contents for the latter.  相似文献   

18.
Leaves of common deciduous trees: the horse chestnut (Aesculus hippocastanum) and linden (Tilia spp.) from the park, near one of the most important cultural institutions, the National Library of Serbia, were studied as bioaccumulators of heavy metal (Cr, Fe, Ni, Zn, Pb, Cu, V, As and Cd) air pollution. The leaf samples were collected from the urban park exposed to the exhaust of heavy traffic. The May–September heavy metal accumulation in the leaves, and their temporal trends, were assayed in a multi-year period (2002–2006). Comparing the obtained concentration of the investigated elements from the beginning to the end of growing seasons, a significant rate of accumulation was determined for a majority of measured elements, and it was concluded that these tree species (horse chestnut and linden) can be used as bioaccumulators of the investigated heavy metals. The SEM-EDAX analysis of individual particles deposited on the leaves showed that the 50–60% belong to a class of fine particles (D < 2 μm), mainly of anthropogenic origin. Thus, the investigated tree species could be grown as a natural barrier against urban air pollution in the vicinity of libraries, museums and other buildings for cultural heritage storage.  相似文献   

19.
Restoring the spans of a historic bridge requires installing tensors to ensure the structural and mechanical stability of the rows of stones that form the resistant body of the bridge. Once the positions where the structure-crossing tensors should be installed have been determined, the entry and exit points of each drill hole must be marked on both sides of the bridge. However, the exit point of each drill hole is not visible from the entry point, making it impossible to drill precisely. Here, we present a method based on a calibrated system that combines precision topography with laser technology. Using this method, drill holes longer than 12 m can be achieved with centimetric precision.  相似文献   

20.
The concentrations of CO2, CO, formaldehyde (H2CO) and water vapour were simultaneously monitored in various sections of a mountain church situated in the village of Rocca Pietore in the Italian Alps. The performance of a conventional, hot-air heating system and a novel design for heating the church, consisting of low-temperature heating elements, such as electrically heated pews and carpets, were compared for the supply, transport and removal of gases, the deposition and/or transformation of which may affect the preservation of displayed works of art. Experiments with sulphur hexafluoride (SF6) tracer-gas showed a considerable influx of external air through the hot air carrier ducts of the old heating system, and also the leakage of the internal air mostly via the apertures of the doors. The ventilation rates for the total volume of the church with the hot-air heating system (on for 1.5 h), the new heating system (on for 2 h), and without heating were calculated to be 0.25, 0.18, and 0.13 h−1, respectively. Without heating, a nearly homogeneous distribution of gases has been observed along both the horizontal and the vertical cross-sections of the church. Immediately after switching on the hot-air heating system, the levels of CO2 and water vapour showed a sharp increase. After turning this system off, the levels of gases showed a slow fall and they developed a highly non-homogeneous spatial distribution indoors for many hours. In the upper region of the church, being airtight, higher concentrations of the pollutants could be detected. The low levels of CO and H2CO, mostly originating from incense burning during services, were correlated to that of CO2. The hot-air heating system has been proved to present a potential deterioration risk to artworks, as it increases the supply, transport and deposition probability of air pollutants. On the other hand, the novel, symmetrical heating system eliminates these undesirable effects, thus its application is advantageous to all churches involved in the preservation of works of art.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号