首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
An investigation has been undertaken into the effect of wavelength in the laser cleaning of parchment. Tests have been carried out using the fundamental (1 064 nm), second harmonic (532 nm) and fourth harmonic (266 nm) outputs from a Q-switched Nd:YAG laser (pulse length 10 ns). Initial testing was carried out on new parchment to characterise the damage caused by overcleaning. The fluence and wavelength of the laser beam were then optimised so that any damage to the parchment or loss of ink during dirt removal from a late eighteenth century parchment document were minimised. The cleaned surfaces were examined by optical and scanning electron microscopy and analysed by measurement of the shrinkage temperature of cleaned collagen fibres. The laser-cleaned areas were compared with uncleaned areas and areas cleaned by traditional techniques.  相似文献   

2.
In the present article we report a study on some sodium dodecyl sulphate/propylene carbonate based aqueous micellar solutions developed with the aim of setting up a nanotechnological cleaning system to remove naturally aged polymeric acrylic layers from the surface of the wall paintings in the Old Sacristy of Santa Maria della Scala in Siena (15th century). Being these systems mainly composed of water (more than 70% by weight), the cleaning of the painted surface have been performed with low environmental impact, due to the small amount of the pure organic solvents used (always less than 25% by weight). Furthermore, the aqueous phase constitutes a hydrophilic barrier to the penetration of the hydrophobic acrylic materials into the porous support. Fourier Transform InfraRed spectroscopy (FTIR), Scanning Electron Microscopy coupled with Energy Dispersive X-rays analysis (SEM/EDX) and in situ capillary water adsorption measurements indicated the efficacy of this cleaning procedure. Finally, the chemical diagnostics investigation enabled to ascertain the presence of both salts (nitrates and gypsum) and the acrylic polymeric material.  相似文献   

3.
The procedures for making and applying a new family of high viscosity aqueous polymeric dispersions based on poly(vinyl alcohol)-borax (PVA-borax) matrices are presented. A specific system of this type has been used to remove an oxidized varnish coating from the surface of “Coronation of the Virgin with Saints”, a 15th century egg tempera painting on wood by Neri di Bicci (Florence, 1418–1492). FTIR spectra showed that the oxidized varnish was constituted of highly aged shellac resin. Good cleaning performance was attained when the liquid portion of the dispersion consisted of a mixture of water and acetone. Rheological investigations indicate that the acetone content does not affect the mechanical properties of the polymeric dispersion. Those mechanical properties permit easy removal of the cleaning agent simply by peeling it from the surface by means of a forceps or spatula once it has carried out its cleaning function. Optical microscopic and FTIR investigations show that the cleaning agent is able to remove the oxidized varnish coating from the surface of the Neri di Bicci painting without leaving detectable residues.  相似文献   

4.
The paper presents the use of laser radiation for cleaning of beeswax treated granite stone. In the early sixties, prestigious restorers decided to apply molten beeswax on the granite surface of valuable monuments with the aim of preventing the erosive action of atmospheric agents. An interesting example of this treatment is the Renaissance Frieze in the Cloister of the Cathedral of Santiago de Compostela in Galicia (Northwest Spain). With time, salt accumulation beneath the beeswax layer has caused an intense surface disintegration of granite. Conventional cleaning methods can destroy sculptured details of these emblematic monuments. For this reason, excimer laser cleaning has been chosen as a promising non contact, selective and environmentally friendly cleaning technique to be studied.The cleaning tests have been carried out using an excimer laser (ArF, 193 nm), with fluences between 0.5 and 2 J cm−2 pulse−1 and a spot area of 0.025 cm2. Samples representing beeswax films over Roan granite have been irradiated and their degree of cleaning has been studied as a function of the number of pulses and the laser fluence.Cleaning efficiency has been evaluated by FT-Raman Spectroscopy, allowing to establish the beeswax ablation threshold and the ablation rate.Excimer laser cleaning allows a progressive and controlled removal of a few tenths of micrometers of beeswax per pulse without damaging the underlying granite stone.  相似文献   

5.
  相似文献   

6.
The scientific approach to the restoration and monitoring of mural paintings, at S. Girolamo Chapel – SS. Annunziata Church in Florence, is reported as a fruitful example of the synergic collaboration between restorers and scientists in the planning and development of conservative interventions. Before restoration, the painting technique and the state of preservation of the pictorial cycle have been investigated firstly by close examination of the painted surfaces and then by optical and/or SEM-EDS microscopy and μFT-IR spectroscopy on appropriately selected samples. In particular, the original constituent materials and those belonging to subsequent restorations were characterized together with those originating from decay processes. In this mural painting cycle, a peculiar “fresco” technique has been used although an auxiliary binder for pigment distemper has been also employed. The use of this technique, sometimes in an improper way together with uncorrected restoration interventions, are the main responsible of the unsatisfactory state of conservation of many painted areas. Preliminary conservation trials and scientific studies were carried out to design the most convenient restoration intervention and to verify the correctness and non-invasive of the necessary operations. Special attention was devoted to cleaning procedures, continuously monitored by a physico-chemical methodology, mainly based on microinvasive, microscopic and spectroscopic investigations, to evaluate the efficiency, advantages and drawbacks of the proposed cleaning procedures and define the most appropriate ones. Finally, specific decay markers have been recognized, by a comparison of the results obtained from the detached samples with those deriving from artificially aged models, to be used for a correct future monitoring and maintenance of the wall paintings.  相似文献   

7.
Laser cleaning was applied to remove aged and soiled oil paints of the 19th century from weathered, brittle sandstone surfaces. In contrast to other tested cleaning methods, the laser technique allows the removal of the oil paint layers with a minimum of material loss in brittle zones. The cleaned test areas have been investigated by optical and scanning electron microscopy as well as by colour measurements. The investigations have shown that the dirt and the oil paint layers can be removed by laser cleaning without affecting the original sandstone surface and that the pores can be opened again. The brown shade after cleaning is not caused by laser interaction with the sandstone surface but by historic impregnation with linseed oil. Immediately after cleaning, a treatment with chemical consolidants is necessary to preserve the brittle sandstone surface. Sustainable consolidation could be problematic in some areas, because the laser cleaning also preserves heavily damaged, crumbling zones of the carvings. For economic reasons, laser cleaning should be applied only in the most endangered zones of carvings and combined with classical methods (organic solvents and scalpel).  相似文献   

8.
A medieval wooden panel chamber was rediscovered during reconstruction of the Tetzelhouse in the Saxon town of Pirna. Ceiling and walls are made from 600-year-old fire wood panels fitted together. The complete removal of layers (limewash, plaster, glue and dirt) from the wall panels was the precondition for conservation of the wood panels and for the restoration of the wooden panel chamber. The cleaning was carried out with a pulsed Nd:YAG laser after basic investigation of ablation mechanisms of the layers on the old wood. All layers of the different materials were removed both from the normal surface and out of depressions and woodworm holes with a special range of laser parameters, without damaging the wood. Within this range of parameters the laser cleaning is a self-limiting process. The health hazard from emitted waste products were determined and checked with work place measurements. The laser cleaning of the wooden wall panels was completed in March 1999. A uniform visual impression of all panels was obtained with a warm wooden colour tone.  相似文献   

9.
The application of a new class of organogels as cleaning tools for painted surfaces is described. It combines some of the most attractive features of cleaning liquids and normal gels while diminishing the deleterious characteristics of both. Thus, the ‘latent’ gellant, polyethyleneimine (PEI), reacts with CO2 at room temperature in solutions of several organic liquids to produce an ammonium carbamate form (PEICO2). This charged species organizes itself into 3D polymer networks which immobilize the liquids as gels. The properties of the original solution (i.e. a free-flowing liquid) are re-established immediately after addition of a small amount of a weak acid which displaces the CO2 molecules and makes the PEI chains positively charged. The visual changes are substantiated by rheological analyses. Results from analytical tests to determine the utility of these gels as cleaning tools for painted surfaces of historical and artistic interest, have been obtained from contact angle and FTIR measurements as well as visual comparisons of the surfaces before and after application of the gels. The analyses indicate that the PEICO2-based organogels were very effective in removing different surface patinas from painted supports. A surface layer of dammar was completely removed from a test canvas with oil paint, an aged painting from the XIX century, and a XV century oil-on-wood panel attributed to Mariotto di Cristoforo. Finally, a surface acrylic polymeric resin (used in a restoration performed during the 1960s) was also successfully removed from Renaissance wall paintings decorating the Santa Maria della Scala Sacristy in Siena, Italy. The isothermally rheoreversible gel approach described in this work represents a new, highly versatile, and very efficient method for removing aged surface patinas from works of art.  相似文献   

10.
The eligibility of laser cleaning is tested on regionally specific sculptural stones. Marlstone and sandstone represent the most common building, architectural and sculptural stones employed in the Czech Republic since the Romanesque period. These stone types differ greatly from the marbles on which positive results have been obtained using laser cleaning. Experimental samples were prepared by sawing rock cores. Artificial blackening of samples’ surfaces simulates natural black patinas. The experimental laser cleaning was conducted using Nd:YAG commercial laser (Laserblast 50) at two different fluences—the low one corresponds to the minimum operating capability of the equipment, and the high fluence represents the maximum operating mode of the equipment (i.e. in the ordinary operating range of the equipment). The samples were cleaned under dry and wet conditions. Use of a high fluence resulted in cratering/spalling that is discussed in terms of rock mineralogical composition (presence of clay minerals), adsorption of moisture on clay minerals and physical properties (porosity). Tensional fracturing (evidenced by scanning electron microscopy) along the cleaned surface is the main mechanism of sample destruction due to the vaporization of adsorbed moisture and due to the different elasticity of present rock-forming minerals. Observed discoloration due to high fluence and insufficient cleaning effect of low fluence present other problems encountered.  相似文献   

11.
Lasers have served as cleaning tools for historical objects and artworks for about 40 years. In many cases, superior results of laser cleaning were achieved with respect to traditional methods. In this technique, contaminations on the surface of the object are ablated by laser irradiation. In order to apply laser cleaning method to fragile materials such as paper made of cellulose or parchment, heat deposition to the bulk should be minimal, to prevent damage. In this work, it is demonstrated that laser pulses with femtosecond (fs) duration can exhibit non-thermal ablation of contaminants on paper samples. In particular, laser cleaning studies are concentrated on paper samples with sizing. Fs laser cleaning is performed on artificially soiled and aged samples, as well as on historical ones. The laser used in the experiments has pulse duration of 550 fs and 1030 nm center wavelength. The fluence of the laser is varied and the post-cleaning statuses of samples are investigated. The analyses are color changes, fiber integrity, chemical composition changes and mechanical strengths. These results show that fs lasers can be very efficient in cleaning paper samples, yielding minimal discoloration and no damage to fibers distinguishable on microscopic examination. The presence of sizing also provides further protection against possible side effects.  相似文献   

12.
Within the conservation programme of the mausoleum of Theodoric, located in Ravenna, Italy, we applied a new cleaning procedure based on the use of a recently developed Nd:YAG laser system, suitably equipped in this case with long optical fibre cables for the transmission of laser radiation to work sites on the façade. The intervention of the laser technique was required to complete the cleaning of a decoration surrounding the monolithic dome, after conventional cleaning methods had been applied with unsatisfactory results. Preliminary laboratory analyses on stone samples collected from the dome and subjected to laser treatment indicated that this technique was effective and could fully preserve the lime–Ca oxalate film existing below the thick layer of black crusts. Before starting the operative phase on the mausoleum, it was necessary to solve the practical problem of keeping free access to the monument during cleaning operations, which hindered the location of the laser in close proximity to the sites to be cleaned. This was achieved by preparing long fibre cables (up to 50 m) which permitted the successful completion of the cleaning while leaving the laser body far away from the dome.  相似文献   

13.
On-line monitoring or even closed-loop control is necessary to avoid over-cleaning in case the ablation process is not self-limiting. Therefore, the laser-induced breakdown spectroscopy (LIBS) was used. Basic investigations were carried out on original sandstone samples (Elbsandstein) with strong encrustations as well as medieval stained glass samples (13th century from Cologne Cathedral). The spectroscopic study has shown that the plasma emission can be used for determination of the elemental composition of the ablated material. The plasma was initiated by 248-nm pulses of an KrF-excimer laser (30 ns FWHM). For the spectroscopic analysis, a grating spectrograph in combination with an optical multichannel analyser was used. For the glass and stone samples we obtained a continual alteration of the LIBS spectrum (vanishing of peaks and generating of new element peaks) during the removal process. Thus, certain element peaks can be used to distinguish between encrustation layer and valuable underlying material. To show the potential of LIBS we designed an experimental laser cleaning set-up including closed-loop LIBS control and demonstrated successful automatic cleaning of an original glass fragment.  相似文献   

14.
The protective performances of two new fluorinated acrylic copolymers (based on the monomers 1H,1H,2H,2H-perfluorodecyl methacrylate (XFDM) and 1,1,1,3,3,3-hexafluoroisopropyl methacrylate (HFIM) are evaluated and compared with Paraloid B72, a commercial copolymer ethyl methacrylate/methyl acrylate (EM/MA) and its partially fluorinated homologous 2,2,2-trifluoroethyl methacrylate/MA (TFEM/MA). The polymeric materials have been tested on Candoglia marble, a very low open porosity stone (<1%) used in Italian historical architecture (Milan Cathedral). The copolymers were tested according to UNI-Normal protocol. Measurements of capillary water absorption, static contact angles, colour variation and water vapour permeability were made before and after accelerated photo-ageing. FTIR spectroscopy and size exclusion chromatography (SEC) analyses were carried out on samples aged on inert substrate to assess the photostability of the copolymers themselves. The relationship between the protection efficacy and the fluorine content and distribution has been investigated. The results obtained show that the addition of a partially fluorinated co-monomer to the Paraloid B72 copolymer structure did not result in the expected improvement of the coating properties, while the fluorination of the copolymer side chain gave rise to encouraging performance.  相似文献   

15.
A KrF-excimer laser operating at λ = 248 nm was used for basic studies in cleaning ancient glass surfaces. For irradiation a mask projection technique was applied. A modified optical set-up was designed using cylindrical lenses for large area removal by line scanning. Previous investigations revealed insufficient knowledge about interaction processes between UV-laser radiation and individual surface layers of encrusted historical glass. Thus, first detailed studies were carried out on special model glass samples simulating the behaviour of historical glass. The potential of removing crusts, bio layers as well as layers of different conservation materials (due to former conservation work) were examined. The avoidance of damaging material such as gel layers, paint layers or the bulk glass was of great importance. Removal rates and thresholds for the materials mentioned above were carried out. The collected data enables a comparison and evaluation of the feasibility for the removal of superficial layers from historical glass artefacts. The results indicate that in some cases a closed loop process control will be necessary to avoid over-cleaning.  相似文献   

16.
This research evaluates the use of microblasting technique with powdered cellulose as a new tool for dry cleaning documents. Different cleaning tests were conducted on three documents with different properties following this new approach and the results were compared to those obtained with traditional dry cleaning with erasers. In order to assess changes caused to the supports, the treated documents were examined both before and after cleaning with optical and 3D stereomicroscopy, SEM-EDS and spectrophotometry. The results allow the conclusion that microblasting with powdered cellulose is a feasible technique to remove surface dirt or grime on paper documents. This research proves that the new use of the technique does not entail changes to the surface properties of the treated supports. Moreover, powdered cellulose is chemically stable and compatible with paper documents, preventing negative long-term effects derived from the presence of rubber residues that may remain in paper fibres when using erasers in dry cleaning treatments.  相似文献   

17.
Plasma technology is an innovative environmental friendly process that can be an option to the conventional methods for materials’ processing. Nonequilibrium low pressure plasma found efficiency as a nondestructive method for the treatment of different materials, many of them belonging to the cultural heritage, in some proper operations such as: atomic-level cleaning, decontamination, thin film deposition. In the paper, the low pressure nonequilibrium plasma is applied for the deposition of plasma polymer poly(methyl methacrylate-co-ethyl acrylate) P(MMA-co-EtA) thin films on natural aged paper, with the consolidation and protective aim. To verify the plasma polymer applicability for paper protection and consolidation, the film is aged accelerated by UV radiation and the structural and morphological changes are evaluated by FTIR spectroscopy, color/gloss measurement, contact angle and AFM.  相似文献   

18.
The utilization of laser light to produce fine and selective cleaning of superficial deposits and encrustation from stones was originally proposed more than 20 years ago by John Asmus who performed pioneering trials of laser cleaning on stone façades in Venice, Cremona and Padua. The opportunity to collect stone samples from these sites allowed us to carry out an original study aimed at evaluating the conservation state of stone surfaces cleaned 10–20 years ago by means of three different techniques: Nd:YAG laser radiation, micron sandblasting and chemical pads. Samples of various stone types, as Istria limestone, Botticino limestone and Nanto sandstone were collected and examined by means of optical and SEM microscopy, FT/IR, and EDAX analyses. The results provided preliminary indications that the state of conservation of stone surfaces previously subjected to laser cleaning is generally better in comparison with those which concurrently underwent mechanical and chemical cleaning.  相似文献   

19.
The self-limiting effect during laser cleaning only occurs in a limited amount of specific applications in restoration (e.g. removal of black crust from white marble). In all the other cases, a control of the removal process will be necessary either by the operator himself or by the employment of sensor equipment. Various methods, mainly spectroscopic (e.g. LIBS), have been investigated and proposed by others. Despite the fact that these have been shown to be promising, they all have in common rather high investment cost close to that of the cleaning equipment. Furthermore, this highly sophisticated control equipment is not easy to handle by conservators in practice. As an alternative low-cost method, we employed a simple photodiode to detect the scattered light from the irradiation area on the artwork surface. In many cases, this signal contains several pieces of information on the layer just being removed. The scattered radiation detected by the photodiode originates from the laser-induced plasma as well as reflected laser radiation. A separation, if necessary in order to separate the information, is possible by spectral filters. First applications during laser cleaning of corroded metal, encrusted glass and stone were promising. It has turned out that there is a distinct influence on the scattered light amplitude or even the pulse-bandwidth once the laser has removed the encrustation completely. The corresponding signal can be used in a closed loop control or for online monitoring.  相似文献   

20.
The German Federal Foundation for the Environment (Deutsche Bundesstiftung Umwelt) is one of Europe's largest organizations of its kind. It supports innovative, exemplary projects for the protection of the environment and of national historic monuments and cultural landscapes. All projects are set up to provide a platform for researchers, craftsmen and restorers to find a common solution to difficult problems in conservation practice. More than 360 projects have been funded since 1990. Two recent projects deal with laser cleaning, one for stone and the other one for stained glass windows, the latter being presented here. This publication gives an overview on cleaning problems on stained glass windows and the project methodology. The interdisciplinary approach of the project provides the possibility of including experts in different fields to examine perspectives and limits of laser cleaning for stained glass windows. Two other publications in this issue (LACONA III) give selected results on cleaning experiments achieved within this project.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号