首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The aim of this study was to determine whether sex differences and effect of drop heights exist in stiffness alteration of the lower extremity during a landing task with a drop height increment. Twelve male participants and twelve female participants performed drop landings at two drop heights (DL40 and DL60; in cm). The leg and joint stiffnesses were calculated using a spring–mass model, and the joint angular kinematics were calculated using motion capture. Ground reaction forces (GRFs) were recorded using a force plate. The peak vertical GRF of the females was significantly increased when the drop height was raised from 40 to 60 cm. Significantly less leg and knee stiffness was observed for DL60 in females. The ankle, knee, and hip angular displacement during landing were significantly increased with drop height increment in both sexes. The knee and hip flexion angular velocities at contact were significantly greater for the 60 cm drop height relative to the 40 cm drop height in males. These sex disparities regarding the lower extremity stiffness and kinematics alterations during drop landing with a drop height increment would predispose females to lower extremity injury.  相似文献   

2.
Peak joint angles and joint angular velocities were evaluated for varying speed forehands in an attempt to better understand what kinematic variables are most closely related to increases in post-impact ball velocity above 50% of maximal effort. High-speed video was used to measure three-dimensional motion for 12 highly skilled tennis players who performed forehands at three different post-impact ball speeds: fast (42.7 +/- 3.8 m/s), medium (32.1 +/- 2.9 m/s), and slow (21.4 +/- 2.0 m/s). Several dominant-side peak joint angles (prior to ball impact) increased as post-impact ball speed increased from slow to fast: wrist extension (16%), trunk rotation (28%), hip flexion (38%), knee flexion (27%), and dorsiflexion (5%). Between the aforementioned peak joint angles and ball impact, dominant-side peak angular velocities increased as ball speed increased from slow to fast: peak wrist flexion (118%), elbow flexion (176%), trunk rotation (99%), hip extension (143%), knee extension (56%), and plantarflexion (87%). Most kinematic variables changed as forehand ball speed changed; however, some variables changed more than others, indicating that range of motion and angular velocity for some joints may be more closely related to post-impact ball speed than for other joints.  相似文献   

3.
High impact forces during gymnastic landings are thought to contribute to the high rate of injuries. Lower limb joint flexion is currently limited within gymnastic rules, yet might be an avenue for reduced force absorption. This study investigated whether lower limb flexion during three gymnastic landings was related to force. Differences between landings were also explored. Twenty-one elite women's artistic gymnasts performed three common gymnastic techniques: drop landing (DL), front and back somersaults. Ankle, knee, and hip angles, and vertical ground reaction force [(vGRF) magnitude and time to peak], were measured using three-dimensional motion analysis and force platform. The DL had significantly smaller peak vGRF, greater time to peak vGRF and larger lower limb flexion ranges than landing from either somersault. Peak vGRF and time to peak vGRF were inversely related. Peak vGRF was significantly reduced in gymnasts who landed with greater hip flexion, and time to peak was significantly increased with increasing ankle, knee, and hip flexion. Increased range of lower limb flexion should be encouraged during gymnastic landings to increase time to peak vGRF and reduce high impact force. For this purpose, judging criteria limitations on lower limb flexion should be reconsidered.  相似文献   

4.
The aim of this study was to determine whether cyclists modify the pattern of force application to become more effective during a prolonged ride to exhaustion. Twelve competitive male cyclists completed a steady-rate exercise ride to exhaustion at 80% of their maximum power output at 90 rev x min(-1) on a cycle ergometer. Pedal force, pedal and crank angle data were collected from an instrumented bicycle for three pedalling cycles at the end of the first and final minutes of the exercise test with simultaneous video recording of the lower limbs. Kinematic and force data were combined to compute hip, knee and ankle joint moments. There were changes in the pattern of force application, joint kinematics and joint moments of force. Comparison of the first minute and the final minute ride revealed significantly increased peak effective force (340 +/- 65.0 and 377 +/- 74.8 N for the first and final minute, respectively; F1,11 = 7.44, P = 0.02), increased positive (28.4 +/- 4.5 and 30.5 +/- 4.8 N x s for the first and final minute, respectively; F1,11 = 7.80, P = 0.02) and negative angular impulses (-1.5 +/- 1.6 and -2.4 +/- 1.5 N x s for the first and final minute, respectively; F1,11 = 4.50, P = 0.06). Contrary to our initial assumptions, it would appear that riders became less effective during the recovery phase, which increased the demand for forces during the propulsive phase. Training the pattern of force application to improve effectiveness may be a useful strategy to prolong an endurance ride.  相似文献   

5.
This study analysed the modulation of jump performance, vertical stiffness as well as joint and intralimb coordination throughout a 30-s vertical jump test. Twenty male athletes performed the test on a force plate while undergoing kinematic analysis. Jump height, power output, ground contact time, vertical stiffness, maximum knee and hip flexion angles, and coordination by continuous relative phase (CRP) were analysed. Analysis of variance was used to compare variables within deciles, and t-tests were used to compare CRP data between the initial and final jumps. Results showed reduction in jump height, power output, and vertical stiffness, with an increase in contact time found during the test. Maximum knee and hip flexion angles declined, but hip angle decreased earlier (10–20% of the test) than knee angle (90–100%). No changes were observed in CRP for thigh–leg coupling when comparing initial and final jumps, but the trunk–thigh coupling was more in-phase near the end of the test. We conclude that fatigue causes reduction in jump performance, as well as changes in stiffness and joint angles. Furthermore, changes in intralimb coordination appear at the last 10% of the test, suggesting a neuromotor mechanism to counterbalance the loss of muscle strength.  相似文献   

6.
Abstract

Pre-programmed and stretch-induced muscle activities of agonist muscles can play important roles during stretch-shortening cycle exercises. It is still not clear how the antagonist muscles function when the drop and rebound intensities are varied during drop jump (DJ) exercises. The purpose of the present study was to examine the regulation of agonist–antagonist muscle activation during DJ with different drop and rebound heights. The subjects performed DJs with two drop heights (0.2 and 0.4 m) and three different efforts (maximal rebound height, 50% effort of maximal rebound height and landing without rebound). Ankle and knee joint angles, and vertical ground reaction force together with an electromyogram of the lower leg muscles (medial gastrocnemius [MG], soleus [SOL] and tibialis anterior [TA]) were measured simultaneously during DJ. Our results clearly showed that the pre-activation of the antagonist TA was increased with increasing rebound height. Our results further showed that the coactivations of agonist and antagonist muscles during the post-impact 30-ms phase were increased with increasing rebound height. These results suggested that not only the pre-programmed agonist MG muscle activation, but also the pre-programmed antagonist TA activation and the coactivation of the post-impact 30-ms phase may play important roles in the control of rebound height.  相似文献   

7.
We describe the physiological characteristics of amateur outrigger canoe paddlers. Twenty-one paddlers (13 males, 8 females) were evaluated for body stature, aerobic power, muscular strength and endurance, peak paddle force, flexibility and 250 m sprint paddle performance at the end of the outrigging season. The mean variables (+/- s) for the males were: age 27 +/- 9 years, height 175 +/- 5 cm, body mass 80 +/- 5 kg, arm span 178 +/- 7 cm, sitting height 100 +/- 2 cm, aerobic power 3.0 +/- 0.4 l x min(-1), maximum bench press strength 85 +/- 19 kg, right peak paddle force 382 +/- 66 N and left peak paddle force 369 +/- 69 N. For the females, these were: age 26 +/- 6 years, height 168 +/- 5 cm, body mass 70 +/- 8 kg, arm span 170 +/- 5 cm, sitting height 97 +/- 3 cm, aerobic power 2.3 +/- 0.51 l x min(-1), maximum bench press strength 47 +/- 10 kg, right peak paddle force 252 +/- 63 N and left peak paddle force 257 +/- 60 N. Analysis of variance revealed differences (P < 0.05) between the dominant and non-dominant sides of the body for peak paddle force, isokinetic internal and external rotation, and flexion and extension torque of the shoulder joint. The outrigger canoe paddlers were generally within the range of scores found to describe participants of other water craft sports. Outrigger canoeists should be concerned with the muscular strength imbalances associated with paddling technique.  相似文献   

8.
Much of the training of competitive telemark skiers is performed as dry-land exercises. The specificity of these exercises is important for optimizing the training effect. Our aim here was to study the activation of the knee extensor musculature and knee angular displacement during competitive telemark skiing and during dry-land strength training exercises to determine the specificity of the latter. Specificity was analysed with respect to angular amplitude, angular velocity, muscle action and electromyographic (EMG) activity. Five male telemark skiers of national and international standard volunteered to participate in the study, which consisted of two parts: (1) skiing a telemark ski course and (2) specific dry-land strength training exercises for telemark skiing (telemark jumps and barbell squats). The angular displacement of the right knee joint was recorded with an electrogoniometer. A tape pressure sensor was used to measure pressure between the sole of the foot and the bottom of the right ski boot. Electromyographic activity in the right vastus lateralis was recorded with surface electrodes. The EMG activity recorded during maximum countermovement jumps was used to normalize the EMG activity during telemark skiing, telemark jumps and barbell squats. The results showed that knee angular displacement during telemark skiing and dry-land telemark jumps had four distinct phases: a flexion (F1) and extension (E1) phase during the thrust phase of the outside ski/leg in the turn/jump and a flexion (F2) and extension (E2) phase when the leg was on the inside of the turn/jump. The vastus lateralis muscle was activated during F1 and E1 in the thrust phase during telemark skiing and telemark jumps. The overall net knee angular amplitude was significantly greater (P < 0.05) for telemark jumps than for telemark skiing. Barbell squats showed a knee angular amplitude significantly greater than that in telemark skiing (P < 0.05). The mean knee angular velocity of the F1 and E1 phases during telemark skiing was about 0.47 rad x s(-1); during barbell squats, it was about 1.22 rad x s(-1). The angular velocity during telemark jumps was 2.34 and 1.59 rad x s(-1) in the F1 and E1 phase, respectively. The normalized activation level of the EMG bursts during telemark skiing, telemark jumps and barbell squats was 70-80%. In conclusion, the muscle action and level of activation in the vastus lateralis during the F1 and E1 phases were similar during telemark skiing and dry-land exercises. However, the dry-land exercises showed a larger knee extension and flexion amplitude and angular velocity compared with telemark skiing. It appears that an adjustment of knee angular velocity during barbell squats and an adjustment of knee angle amplitude during both telemark jumps and barbell squats will improve specificity during training.  相似文献   

9.
To determine the contributions of the motions of the body segments to the vertical ground reaction force (Fz), the joint torques produced by the leg muscles, and the time course of vertical velocity generation during a vertical jump, 15 men were videotaped performing countermovement vertical jumps from a force plate with and without an arm swing. Linear kinematic, Fz, and joint torque data were computed and compared using repeated measures analysis of variance. Maximum jump height was significantly larger in the arm swing jumps compared to the no arm swing jumps and was due to both a higher height of the center of mass (CM) at takeoff (54%) and a larger vertical velocity of the CM at takeoff (46%). The net vertical impulse created during the propulsive phase of the arm swing jumps was greater due to a trend of an increased duration (0.021 s) of the propulsive phase and not to larger average values of Fz. In the arm swing jumps, the arm motion resulted in the arms making a larger maximal contribution to Fz during the middle of the propulsive phase and decreased the negative contribution of the trunk-head and thigh to Fz late in the propulsive phase. Last, the arm swing decreased the extensor torques at the hip (13%), knee (10%), and ankle (10%) early in the propulsive phase but augmented these same extensor torques later in the propulsive phase.  相似文献   

10.
Twenty-five volleyball players (14 males, 11 females) were videotaped (60 Hz) performing countermovement vertical jumps with and without an arm swing. Ground reaction force and video-based coordinate data were collected simultaneously. The resultant joint force and torque at the hip, knee, ankle and shoulder for two trials per subject per condition were computed and normalized. Average kinematic, resultant joint force and torque data were compared using repeated-measures analysis of variance. Larger values were recorded for the vertical velocity of the centre of mass at take-off in the jumps with (mean 2.75, s = 0.3 m.s-1) versus without (mean 2.44, s = 0.23 m.s-1) an arm swing. The jumps with no arm swing produced larger torques at the hip during the first third of the propulsive phase (from zero to maximum vertical velocity of the centre of mass). During the final two-thirds of the propulsive phase, the arm swing augmented hip extensor torques by slowing the rate of trunk extension and placing the hip extensor muscles in slower concentric conditions that favoured the generation of larger forces and resultant joint torques. During the first two-thirds of the propulsive phase, knee extensor torque increased by 28% in the jumps with an arm swing, but maintained a relatively constant magnitude in the jumps with no arm swing.  相似文献   

11.
A well-documented observation after eccentric exercise is a reduction in maximal voluntary force. However, little is known about the ability to maintain maximal isometric force or generate and maintain dynamic peak power. These aspects of muscle function were studied in seven participants (5 males, 2 females). Knee extensor isometric strength and rate of fatigue were assessed by a sustained 60 s maximal voluntary contraction at 80 degrees and 40 degrees knee flexion, corresponding to an optimal and a shortened muscle length, respectively. Dynamic peak power and rate of fatigue were assessed during a 30 s Wingate cycle test. Plasma creatine kinase was measured from a fingertip blood sample. These variables were measured before, 1 h after and 1, 2, 3 and 7 days after 100 repetitions of the eccentric phase of the barbell squat exercise (10 sets x 10 reps at 80% concentric one-repetition maximum). Eccentric exercise resulted in elevations in creatine kinase activity above baseline (274+/-109 U x l(-1); mean +/- s(x)) after 1 h (506+/-116 U x l(-1), P < 0.05) and 1 day (808+/-117 U x l(-1), P < 0.05). Isometric strength was reduced (P < 0.05) for 7 days (35% at 1 h, 5% at day 7) and the rate of fatigue was lower (P < 0.05) for 3 days at 80 degrees and for 1 day at 40 degrees. Wingate peak power was reduced to a lesser extent (P < 0.05) than isometric strength at 1 h (13%) and, although the time course of recovery was equal, the two variables differed in their pattern of recovery. Eccentrically exercised muscle was characterized by an inability to generate high force and power, but an improved ability to maintain force and power. Such functional outcomes are consistent with the proposition that type II fibres are selectively recruited or damaged during eccentric exercise.  相似文献   

12.
The aim of this study was to examine joint power generation during a concentric knee extension isokinetic test and a squat vertical jump. The isokinetic test joint power was calculated using four different methods. Five participants performed concentric knee extensions at 0.52, 1.57, 3.14 and 5.23 rad x s(-1) on a Lido isokinetic dynamometer. The squat vertical jump was performed on a Kistler force plate. Kinematic data from both tests were collected and analysed using an ELITE optoelectronic system. An inverse dynamics model was applied to measure knee joint moment in the vertical jump. Knee angular position data from the kinematic analysis in the isokinetic test were used to derive the actual knee angular velocity and acceleration, which, in turn, was used to correct the dynamometer moment for inertial effects. Power was measured as the product of angular velocity and moment at the knee joint in both tests. Significant differences (P < 0.05) were found between mean (+/- s) peak knee joint power in the two tests (squat vertical jump: 2255 +/- 434 W; isokinetic knee extension: 771 +/- 81 W). Correlation analysis revealed that there is no relationship between the peak knee joint power during the vertical jump and the slow velocity isokinetic tests. Higher isokinetic velocity tests show better relationships with the vertical jump but only if the correct method for joint power calculation is used in the isokinetic test. These findings suggest that there are important differences in muscle activation and knee joint power development that must be taken into consideration when isokinetic tests are used to predict jumping performance.  相似文献   

13.
Twenty-five volleyball players (14 males, 11 females) were videotaped (60Hz) performing countermovement vertical jumps with and without an arm swing. Ground reaction force and video-based coordinate data were collected simultaneously. The resultant joint force and torque at the hip, knee, ankle and shoulder for two trials per subject per condition were computed and normalized. Average kinematic, resultant joint force and torque data were compared using repeated-measures analysis of variance. Larger values were recorded for the vertical velocity of the centre of mass at take-off in the jumps with (mean 2.75, s=0.3m.s-1) versus without (mean 2.44, s= 0.23m.s-1) an arm swing. The jumps with no arm swing produced larger torques at the hip during the first third of the propulsive phase (from zero to maximum vertical velocity of the centre of mass). During the final two-thirds of the propulsive phase, the arm swing augmented hip extensor torques by slowing the rate of trunk extension and placing the hip extensor muscles in slower concentric conditions that favoured the generation of larger forces and resultant joint torques. During the first two-thirds ofthe propulsive phase, knee extensor torque increased by 28% in the jumps with an arm swing, but maintained a relatively constant magnitude in the jumps with no arm swing.  相似文献   

14.
陶珊  曲峰 《体育科研》2014,(1):34-38
目的：研究不同速度下台阶对膝关节压力的影响,为运动健身和损伤预防提供生物力学支持.方法：对10名男性普通大学生分别以48、60、72、84、96、108步/分、慢速跑、中速跑、快速跑,这9种速度下台阶时膝关节峰值力和屈曲角度等进行分析.结果：随着下台阶速度的增大,膝关节垂直和水平方向的峰值力均不断增大.以中跑速度下台阶时膝关节所受的垂直方向的峰值力显著增大.以慢跑速度下台阶时膝关节所受的前后方向的峰值力显著增大.以快跑速度下台阶时膝关节垂直方向峰值力超过两倍的体重.同一速度下台阶,左右膝关节峰值力无显著性差异.随着下台阶速度的增加,峰值力时刻膝关节的屈曲角度不断增加.结论：膝关节负荷随着下台阶速度的增大而增大.膝关节屈曲幅度随着下台阶速度的增大而增大.同一速度下台阶时,右膝关节负荷较左膝关节大,但无统计学差异.  相似文献   

15.
ABSTRACT

This study investigated the between-limb asymmetry in kinetic and temporal characteristics during bilateral plyometric drop jumps from different heights. Seventeen male basketball players performed drop jumps from 3 heights on two platforms in randomized orders. Vertical ground reaction force data were analysed with respect to the lead limb (i.e. the limb stepping off the raised platform first) and trail limb. Peak forces and loading rates of each limb were calculated. The absolute time differential between the two limbs at initial ground contact and takeoff were determined. The frequency of symmetrical landing and taking off with “both limbs together” were counted using 3 time windows. Results showed that the lead limb displayed higher peak forces and loading rates than the trail limb across all heights (p <.05). As drop height increased, the absolute time differentials decreased at initial ground contact (p <.001) but increased at takeoff (p =.035). The greater the preset time window, the more landings and takeoffs were classified as bilaterally symmetrical. In conclusion, higher drop heights allowed subjects to become more bilaterally symmetrical in the timing of landing but this reduction in temporal asymmetry did not accompany with any reduction in kinetic asymmetry.  相似文献   

16.
Kinetics and kinematics analysis of incremental cycling to exhaustion   总被引：1，自引：0，他引：1  
Technique changes in cyclists are not well described during exhaustive exercise. Therefore the aim of the present study was to analyze pedaling technique during an incremental cycling test to exhaustion. Eleven cyclists performed an incremental cycling test to exhaustion. Pedal force and joint kinematics were acquired during the last three stages of the test (75%, 90% and 100% of the maximal power output). Inverse dynamics was conducted to calculate the net joint moments at the hip, knee and ankle joints. Knee joint had an increased contribution to the total net joint moments with the increase of workload (5-8% increase, p < 0.01). Total average absolute joint moment and knee joint moment increased during the test (25% and 39%, for p < 0.01, respectively). Increases in plantar flexor moment (32%, p < 0.01), knee (54%, p < 0.01) and hip flexor moments (42%, p = 0.02) were found. Higher dorsiflexion (2%, for p = 0.03) and increased range of motion (19%, for p = 0.02) were observed for the ankle joint. The hip joint had an increased flexion angle (2%, for p < 0.01) and a reduced range of motion (3%, for p = 0.04) with the increase of workload. Differences in joint kinetics and kinematics indicate that pedaling technique was affected by the combined fatigue and workload effects.  相似文献   

17.
For fencing, speed of the lunge is considered critical to success. The aim of this study is to investigate determinants of lunge speed based on biomechanics. Ground reaction force (GRF) and three-dimensional kinematic data were collected from 7 elite fencers and 12 intermediate-level fencers performing maximum-effort lunges. The results showed that elite fencers acquired a higher horizontal peak velocity of the centre of gravity (HPV) and concomitantly a higher horizontal peak GRF exerted by rear leg (PGRF) than intermediate-level fencers (P?P?P?P?≤?.05). Our findings suggest that training aimed at enhancing strength and power of rear knee extensors is important for fencers to improve speed of the lunge. Also, increasing the extension of rear knee during the lunge, at the same time decreasing the flexion of the forward knee before extension are positive for lunge performance.  相似文献   

18.
Much of the training of competitive telemark skiers is performed as dry-land exercises. The specificity of these exercises is important for optimizing the training effect. Our aim here was to study the activation of the knee extensor musculature and knee angular displacement during competitive telemark skiing and during dry-land strength training exercises to determine the specificity of the latter. Specificity was analysed with respect to angular amplitude, angular velocity, muscle action and electromyographic (EMG) activity. Five male telemark skiers of national and international standard volunteered to participate in the study, which consisted of two parts: (1) skiing a telemark ski course and (2) specific dry-land strength training exercises for telemark skiing (telemark jumps and barbell squats). The angular displacement of the right knee joint was recorded with an electrogoniometer. A tape pressure sensor was used to measure pressure between the sole of the foot and the bottom of the right ski boot. Electromyographic activity in the right vastus lateralis was recorded with surface electrodes. The EMG activity recorded during maximum countermovement jumps was used to normalize the EMG activity during telemark skiing, telemark jumps and barbell squats. The results showed that knee angular displacement during telemark skiing and dry-land telemark jumps had four distinct phases: a flexion (F1) and extension (E1) phase during the thrust phase of the outside ski/leg in the turn/jump and a flexion (F2) and extension (E2) phase when the leg was on the inside of the turn/jump. The vastus lateralis muscle was activated during F1 and E1 in the thrust phase during telemark skiing and telemark jumps. The overall net knee angular amplitude was significantly greater (P<0.05) for telemark jumps than for telemark skiing. Barbell squats showed a knee angular amplitude significantly greater than that in telemark skiing (P<0.05). The mean knee angular velocity of the F1 and E1 phases during telemark skiing was about 0.47 rad?·?s?1; during barbell squats, it was about 1.22 rad?·?s?1. The angular velocity during telemark jumps was 2.34 and 1.59 rad?·?s?1 in the F1 and E1 phase, respectively. The normalized activation level of the EMG bursts during telemark skiing, telemark jumps and barbell squats was 70–80%. In conclusion, the muscle action and level of activation in the vastus lateralis during the F1 and E1 phases were similar during telemark skiing and dry-land exercises. However, the dry-land exercises showed a larger knee extension and flexion amplitude and angular velocity compared with telemark skiing. It appears that an adjustment of knee angular velocity during barbell squats and an adjustment of knee angle amplitude during both telemark jumps and barbell squats will improve specificity during training.  相似文献   

19.
To investigate the effects of different loads on system and lower-body kinetics during jump squats, 12 resistance-trained men performed jumps under different loading conditions: 0%, 12%, 27%, 42%, 56%, 71%, and 85% of 1-repetition maximum (1-RM). System power output was calculated as the product of the vertical component of the ground reaction force and the vertical velocity of the bar during its ascent. Joint power output was calculated during bar ascent for the hip, knee, and ankle joints, and was also summed across the joints. System power output and joint power at knee and ankle joints were maximized at 0% 1-RM (p < 0.001) and followed the linear trends (p < 0.001) caused by power output decreasing as the load increased. Power output at the hip was maximized at 42% 1-RM (p = 0.016) and followed a quadratic trend (p = 0.030). Summed joint power could be predicted from system power (p < 0.05), while system power could predict power at the knee and ankle joints under some of the loading conditions. Power at the hip could not be predicted from system power. System power during loaded jumps reflects the power at the knee and ankle, while power at the hip does not correspond to system power.  相似文献   

20.
ABSTRACT

This study examined the effects of shoe collar-height and counter-stiffness on ground reaction force (GRF), ankle and knee mechanics in landing. Eighteen university basketball players performed drop landing when wearing shoes in different collar height (high vs. low) and counter-stiffness (stiffer vs. less stiff). Biomechanical variables were measured with force platform and motion capturing systems. Two-way repeated measures ANOVA was performed with α = 0.05. Wearing high collar shoes exhibited smaller peak ankle dorsiflexion and total sagittal RoM, peak knee extension moment, but larger peak knee varus moment than the low collar shoes. Stiffer counter-stiffness shoes related to smaller ankle inversion at touchdown and total coronal RoM, but larger peak knee flexion and increased total ankle and knee sagittal RoM than the less stiff counter-stiffness. Furthermore, wearing stiffer counter-stiffness shoes increased forefoot GRF peak at high collar condition, while no significant differences between counter-stiffness at low collar condition. These results suggest that although higher collar height and/or stiffness heel counter used can reduce ankle motion in coronal plane, it would increase the motion and loading at knee joint, which is susceptible to knee injuries. These findings could be insightful for training and footwear development in basketball.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号