首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
To investigate the effects of different loads on system and lower-body kinetics during jump squats, 12 resistance-trained men performed jumps under different loading conditions: 0%, 12%, 27%, 42%, 56%, 71%, and 85% of 1-repetition maximum (1-RM). System power output was calculated as the product of the vertical component of the ground reaction force and the vertical velocity of the bar during its ascent. Joint power output was calculated during bar ascent for the hip, knee, and ankle joints, and was also summed across the joints. System power output and joint power at knee and ankle joints were maximized at 0% 1-RM (p < 0.001) and followed the linear trends (p < 0.001) caused by power output decreasing as the load increased. Power output at the hip was maximized at 42% 1-RM (p = 0.016) and followed a quadratic trend (p = 0.030). Summed joint power could be predicted from system power (p < 0.05), while system power could predict power at the knee and ankle joints under some of the loading conditions. Power at the hip could not be predicted from system power. System power during loaded jumps reflects the power at the knee and ankle, while power at the hip does not correspond to system power.  相似文献   

2.
The aim of this study was to examine the effects of barbell load on countermovement vertical jump (CMJ) power and net impulse within a theoretically valid framework, cognisant of the underpinning force, temporal, and spatial components. A total of 24 resistance-trained rugby union athletes (average ± SD: age: 23.1 ± 3.4 years; height: 1.83 ± 0.05 m; body mass (BM): 91.3 ± 10.5 kg) performed maximal CMJ under 5 experimental conditions in a randomised, counterbalanced order: unloaded, and with additional loads of 25%, 50%, 75%, and 100% of BM. Peak power and average power were maximised during the unloaded condition, both decreasing significantly (P < 0.05) as load increased. Net impulse was maximised with 75% of BM, which was significantly greater (P < 0.05) than the unloaded and 100% of BM conditions. Net mean force and mean velocity were maximised during the unloaded condition and decreased significantly (P < 0.05) as load increased, whereas phase duration increased significantly (P < 0.05) as load increased. As such, the interaction between barbell load and the underpinning force, time, and displacement components should be considered by strength and conditioning coaches when prescribing barbell loads.  相似文献   

3.
Abstract

The present study aimed to quantify the intensity of lower extremity plyometric exercises by determining joint mechanical output. Ten men (age, 27.3 ± 4.1 years; height, 173.6 ± 5.4 cm; weight, 69.4 ± 6.0 kg; 1-repetition maximum [1RM] load in back squat 118.5 ± 12.0 kg) performed the following seven plyometric exercises: two-foot ankle hop, repeated squat jump, double-leg hop, depth jumps from 30 and 60 cm, and single-leg and double-leg tuck jumps. Mechanical output variables (torque, angular impulse, power, and work) at the lower limb joints were determined using inverse-dynamics analysis. For all measured variables, ANOVA revealed significant main effects of exercise type for all joints (P < 0.05) along with significant interactions between joint and exercise (P < 0.01), indicating that the influence of exercise type on mechanical output varied among joints. Paired comparisons revealed that there were marked differences in mechanical output at the ankle and hip joints; most of the variables at the ankle joint were greatest for two-foot ankle hop and tuck jumps, while most hip joint variables were greatest for repeated squat jump or double-leg hop. The present results indicate the necessity for determining mechanical output for each joint when evaluating the intensity of plyometric exercises.  相似文献   

4.
Abstract

An analysis system for barbell weightlifting exercises is proposed to record reliable performance and neuromuscular responses. The system consists of surface electromyography (sEMG) synchronized with electrogoniometry and a barbell position transducer. The purpose of this study was to establish the reliability of the three components of the system. Nine males (age 28.9 ± 4.8 years, mass 85.7 ± 15.1 kg) performed squat exercise at three loads on three separate trial days. A data acquisition and software system processed maximal knee angle (flexion), mean power for the concentric phase of squat exercise, and normalized root mean square of the vastus lateralis. Inter-trial coefficients of variation for each variable were calculated as 5.3%, 7.8%, and 7.5% respectively. In addition, knee joint motion and barbell displacement were significantly related to each other (bar displacement (m) = 1.39–0.0057 × knee angle (degress), with goodness-of-fit value, r 2 = 0.817), suggesting knee goniometry alone can represent the kinematics of a multi-joint squat exercise. The proven reliability of the three components of this system allows for real-time monitoring of resistance exercise using the preferred training methods of athletes, which could be valuable in the understanding of the neuromuscular response of elite strength training methods.  相似文献   

5.
The purpose of this study was to examine the effects of external load on vertical ground reaction force, and linear and angular kinematics, during squats. Eight males aged 22.1?±?0.8 years performed maximal concentric squats using loads ranging from 7 to 70% of one-repetition maximum on a force plate while linear barbell velocity and the angular kinematics of the hip, knee and ankle were recorded. Maximum, average and angle-specific values were recorded. The ground reaction force ranged from 1.67?±?0.20 to 3.21?±?0.29 times body weight and increased significantly as external load increased (P?<?0.05). Bar linear velocity ranged from 0.54?±?0.11 to 2.50?±?0.50?m?·?s?1 and decreased significantly with increasing external load (P?<?0.05). Hip, knee and ankle angles at maximum ground reaction force were affected by external load (P?<?0.05). The force?–?barbell velocity curves were fitted using linear models with coefficients (r 2) ranging from 0.59 to 0.96. The results suggest that maximal force exertion during squat exercises is not achieved at the same position of the lower body as external load is increased. In contrast, joint velocity coordination does not change as load is increased. The force?–?velocity relationship was linear and independent from the set of data used for its determination.  相似文献   

6.
This study evaluated the contribution of lower extremity (hip, knee and ankle) net joint torques (NJT) to whole body power (WBP) output during the power snatch (PS). Ten experienced weightlifters (five males and five females) performed five trials of the PS with 60% of one repetition maximum. Lower extremity NJT and WBP were extracted through a three-dimensional motion analyses and used for data analyses. Pearson correlation coefficients were obtained to observe the relationship between lower extremity NJT and WBP. Multiple-regression (stepwise) analyses was also conducted to evaluate the contribution of lower extremity NJT to WBP during the PS with the hip, knee and ankle NJT being the independent variables. Hip NJT was characterised as a significant positive correlation with WBP (r = 0.47, p < 0.01), while knee NJT showed a significant negative correlation with WBP (r = ?0.34, p < 0.05). A significant inter-correlation was also observed between hip NJT and knee NJT (r = ?0.66, p < 0.01). Hip NJT was identified as a significant contributor to WBP during the PS. Practically, this study suggested that training skills allowing weightlifters to utilise hip extensor muscle action would help to improve WBP during the PS.  相似文献   

7.
Technique changes in cyclists are not well described during exhaustive exercise. Therefore the aim of the present study was to analyze pedaling technique during an incremental cycling test to exhaustion. Eleven cyclists performed an incremental cycling test to exhaustion. Pedal force and joint kinematics were acquired during the last three stages of the test (75%, 90% and 100% of the maximal power output). Inverse dynamics was conducted to calculate the net joint moments at the hip, knee and ankle joints. Knee joint had an increased contribution to the total net joint moments with the increase of workload (5–8% increase, p < 0.01). Total average absolute joint moment and knee joint moment increased during the test (25% and 39%, for p < 0.01, respectively). Increases in plantar flexor moment (32%, p < 0.01), knee (54%, p < 0.01) and hip flexor moments (42%, p = 0.02) were found. Higher dorsiflexion (2%, for p = 0.03) and increased range of motion (19%, for p = 0.02) were observed for the ankle joint. The hip joint had an increased flexion angle (2%, for p < 0.01) and a reduced range of motion (3%, for p = 0.04) with the increase of workload. Differences in joint kinetics and kinematics indicate that pedaling technique was affected by the combined fatigue and workload effects.  相似文献   

8.
ABSTRACT

A common practice in resistance training is to perform sets of exercises at, or close to failure, which can alter movement dynamics. This study examined ankle, knee, hip, and lumbo-pelvis dynamics during the barbell back squat under a moderate-heavy load (80% of 1 repetition maximum (1RM)) when performed to failure. Eleven resistance trained males performed three sets to volitional failure. Sagittal plane movement dynamics at the ankle, knee, hip, and lumbo-pelvis were examined; specifically, joint moments, joint angles, joint angular velocity, and joint power. The second repetition of the first set and the final repetition of the third set were compared. Results showed that while the joint movements slowed (p < 0.05), the joint ranges of motion were not altered There were significant changes in most mean joint moments (p < 0.05), indicating altered joint loading. The knee moment decreased while the hip and lumbo-pelvis moments underwent compensatory increases. At the knee and hip, there were significant decreases (p < 0.05) in concentric power output (p < 0.05). Whilst performing multiple sets to failure altered some joint kinetics, the comparable findings in joint range ofmotion suggest that technique was not altered. Therefore, skilled individuals appear to maintain technique when performing to failure.  相似文献   

9.
The purpose of this research was to investigate how lower extremity work was distributed during the pull of cleans performed lifting the barbell to the minimum height required to receive it in a full squat (minimal height clean); or with maximum effort to elevate the barbell as high as possible and receiving it in either a full (maximal effort clean) or partial (power clean) squat. Eight weightlifters screened for proficient technique performed these clean variations at 80% of one repetition maximum. Work performed on the barbell and by the lower extremity net joint moments (NJM) was computed from marker trajectories and ground reaction forces. Total barbell work, lower extremity NJM work, knee extensor work, and knee joint excursion during the second pull was lower in the minimal height clean than the maximal effort and power cleans (P < 0.05). This research demonstrates that more knee extensor work is performed in the second pull of maximal effort and power cleans compared to the minimal height clean. The larger knee extensor work performed is due to larger knee joint excursion during the second pull of the maximal effort and power cleans, but not larger knee extensor NJM.  相似文献   

10.
Abstract

Nine males (age 24.7 ± 2.1 years, height 175.3 ± 5.5 cm, body mass 80.8 ± 7.2 kg, power clean 1-RM 97.1 ± 6.36 kg, squat 1-RM = 138.3 ± 20.9 kg) participated in this study. On day 1, the participants performed a one-repetition maximum (1-RM) in the power clean and the squat. On days 2, 3, and 4, participants performed the power clean, squat or jump squat. Loading for the power clean ranged from 30% to 90% of the participant's power clean 1-RM and loading for the squat and jump squat ranged from 0% to 90% of the participant's squat 1-RM, all at 10% increments. Peak force, velocity, and power were calculated for the bar, body, and system (bar + body) for all power clean, squat, and jump squat trials. Results indicate that peak power for the bar, body, and system is differentially affected by load and movement pattern. When using the power clean, squat or jump squat for training, the optimal load in each exercise may vary. Throwing athletes or weightlifters may be most concerned with bar power, but jumpers or sprinters may be more concerned with body or system power. Thus, the exercise type and load vary according to the desired stimulus.  相似文献   

11.
Sprinting while towing a sled improves sprinting parameters, however, only kinematic and temporal–spatial variables have been reported. The purpose of this study was to determine how lower extremity joint moment impulses alter when towing a sled compared to normal walking. Twelve participants walked normally, walked while towing a sled with a 50% body weight load attached at the waist, and with a 50% body weight load attached at the shoulders. Joint moment impulses were calculated for the hip, knee, and ankle. A mixed-model ANOVA with a between-subject factor of limb and repeated measures of condition was used to compare differences between limbs and towing conditions for each joint. Towing a sled increased joint moment impulses at the hip, knee, and non-dominant ankle. When compared with normal walking waist attachment increased hip extension moment impulse by 214.5% ( ? 3.31 vs. ? 10.41 Nms/kg), and shoulder attachment increased knee extension moment impulse by 166.9% (4.62 vs. 12.33 Nms/kg). The dominant limb produced greater knee extension moment impulse (p < 0.001), while the non-dominant limb produced greater hip extension (p < 0.001) and ankle plantarflexion moment impulse (p < 0.001) across all conditions. Results suggest that walking while towing may increase hip and knee extension strength.  相似文献   

12.
ABSTRACT

This study compared the effects of dictating load using individual (ILVP) or group (GLVP) load-velocity profiles on lower-body strength and power. Nineteen trained males (23.6 ± 3.7 years) completed a back squat one-repetition maximum (1-RM), load-velocity profiling (LVP), and countermovement (CMJ), static-squat (SSJ) and standing-broad (SBJ) jump tests before and after 6 weeks of resistance training. Participants were randomly assigned to an ILVP, or GLVP intervention with intra-session load dictated through real-time velocity monitoring and prediction of current relative performance using either the participant’s LVP (ILVP) or a LVP based on all participant data (GLVP). Training resulted in significant increases in back squat 1-RM for the ILVP and GLVP group (p < 0.01; 9.7% and 7.2%, respectively), with no group-by-time interaction identified between training groups (p = 0.06). All jump performance significantly increased for the ILVP group (p < 0.01; CMJ: 6.6%; SSJ: 4.6%; SBJ: 6.7%), with only CMJ and SSJ improving for the GLVP group (p < 0.05; 4.3%). Despite no significant group-by-time interaction across all variables, the ILVP intervention induced a greater magnitude of adaptation when compared to a GLVP approach. Additionally, an individualised approach may lead to greater positive transfer to power-based movements, specifically vertical and horizontal jumps.  相似文献   

13.
The aim of this study was to identify how changes in the stability conditions of a back squat affect maximal loads lifted and erector spinae muscle activity. Fourteen male participants performed a Smith Machine (SM) squat, the most stable condition, a barbell back (BB) squat, and Tendo-destabilizing bar (TBB) squat, the least stable condition. A one repetition max (1-RM) was established in each squat condition, before electromyography (EMG) activity of the erector spinae was measured at 85% of 1-RM. Results indicated that the SM squat 1-RM load was significantly (p = 0.006) greater (10.9%) than the BB squat, but not greater than the TBB squat. EMG results indicated significantly greater (p < 0.05) muscle activation in the TBB condition compared to other conditions. The BB squat produced significantly greater (p = 0.036) EMG activity compared to the SM squat. A greater stability challenge applied to the torso seems to increase muscle activation. The maximum loads lifted in the most stable and unstable squats were similar. However, the lift with greater stability challenge required greatest muscle activation. The implications of this study may be important for training programmes; if coaches wish to challenge trunk stability, while their athletes lift maximal loads designed to increase strength.  相似文献   

14.
Abstract

The aim of this study was to test the correlation between knee-to-hip flexion ratio during a single leg landing task and hip and knee strength, and ankle range of motion. Twenty-four male participants from a professional soccer team performed a continuous single leg jump-landing test during 10s, while lower limb kinematics data were collected using a motion analysis system. After biomechanical testing, maximal isometric hip (abduction, extension, external rotation), knee extension and flexion strength were measured. Maximum ankle dorsiflexion range of motion was assessed statically using the weight bearing lunge test. Pearson correlation coefficients were calculated to determine the associations between the predictor variables (knee and hip strength, and ankle ROM) and the main outcome measure (knee-to-hip flexion ratio). Correlation between knee-to-hip flexion ratio and hip abductors strength was significant (r = ?0.47; p = 0.019). No other significant correlations were observed among the variables (p > 0.05). These results demonstrated that a lower hip abductors strength in male soccer players was correlated with a high knee-to-hip flexion ratio during landing from a single leg jump, potentially increasing knee overload by decreasing energy absorption at the hip. The results provide a novel proposal for the functioning of hip muscles to control knee overload.  相似文献   

15.
Muscle utilisation in squat exercise depends on technique. The purpose of this study was to compare net joint moments (NJMs) and muscle activation during squats without and with restricted leg dorsiflexion. Experienced men (n = 5) and women (n = 4) performed full squats at 80% one repetition maximum. 3D motion analysis, force platform and (EMG) data were collected. Restricting anterior leg rotation reduced anterior leg (P = 0.001) and posterior thigh (P < 0.001) rotations, resulting in a smaller knee flexion range of motion (P < 0.001). At maximum squat depth, ankle plantar flexor (P < 0.001) and knee extensor (P < 0.001) NJM were higher in unrestricted squats. Hip extensor NJM (P = 0.14) was not different between squat types at maximum squat depth. Vastus lateralis (P > 0.05), vastus medialis (P > 0.05) and rectus femoris (P > 0.05) EMG were not different between squat types. Unrestricted squats have higher ankle plantar flexor and knee extensor NJM than previously reported from jumping and landing. However, ankle plantar flexor and knee extensor NJM are lower in restricted squats than previous studies of jumping and landing. The high NJM in unrestricted squat exercise performed through a full range of motion suggests this squat type would be more effective to stimulate adaptations in the lower extremity musculature than restricted squats.  相似文献   

16.
The strength and technical competence of junior female lifters play a decisive role not only for their current but also adulthood performance. The objective of this study was to investigate the three-dimensional kinematics of the snatch technique in junior female weightlifters. Ten elite junior female weightlifters participated in the study. Two cameras operating at 50 fields per second were used to record the lifts. The heaviest successful lifts were selected for the kinematic analysis. The kinematical data were obtained using a motion analysis system. The duration of the first pull was significantly longer than that of the other phases (P < 0.05). Maximum extension angle and velocity of the lower limb joints were significantly greater in the second pull (P < 0.05). The greatest extension angle was found in the knee joint during the first pull, while the greatest extension angle was observed in the hip joint during the second pull (P < 0.05). Maximum extension velocity of the knee and hip joints was significantly greater than that of the ankle in both phases (P < 0.05). In addition, the vertical velocity of the barbell and the absolute and relative power outputs was significantly higher in the second pull than in the first pull (P < 0.05). In the snatch lifting of junior female weightlifters, the angular kinematics of lower limb joints, the linear kinematics and trajectory of the barbell and other energy characteristics are similar to and consistent with the values reported in literature for adult female weightlifters.  相似文献   

17.
ABSTRACT

This study examined potential differences between maximally cushioned (MAX) shoes and standard cushioned (STND) shoes during countermovement vertical jump (CMVJ) performance. Twenty-one males (23[2] y; 86.5[15.4] kg; 179.8[6.3] cm) completed eight jumps each in MAX and STND shoes while three-dimensional kinematic and kinetic data were collected. Paired-samples t-tests (α = 0.05) and Cohen’s d effect sizes (ES) were used to compare the following variables: vertical jump displacement, jump time, hip, knee and ankle joint angles at the start of the countermovement, the end of the unloading phase, the end of the eccentric phase, and at takeoff, peak joint power, and the joint contributions to total lower extremity work during the eccentric and concentric phases. The ankle was more dorsiflexed at the end of the countermovement in the MAX shoe (p = 0.002; ES = 0.55) but greater plantarflexion occurred in the STND shoes at takeoff (p = 0.028; ES = 0.56). No other differences were observed. The result of this study suggests that unique ankle joint angular positioning may be employed when wearing MAX versus STND shoes. Since the unique ankle joint positioning did not alter jump performance, potential MAX footwear users might not need to consider the potential for altered CMVJ performance when determining whether to adopt MAX footwear.  相似文献   

18.
Hip extensor strategy, specifically relative contribution of gluteus maximus versus hamstrings, will influence quadriceps effort required during squat exercise, as hamstrings and quadriceps co-contract at the knee. This research examined the effects of hip extensor strategy on quadriceps relative muscular effort (RME) during barbell squat. Inverse dynamics-based torque-driven musculoskeletal models were developed to account for hamstrings co-contraction. Net joint moments were calculated using 3D motion analysis and force platform data. Hamstrings co-contraction was modelled under two assumptions: (1) equivalent gluteus maximus and hamstrings activation (Model 1) and (2) preferential gluteus maximus activation (Model 2). Quadriceps RME, the ratio of quadriceps moment to maximum knee extensor strength, was determined using inverse dynamics only, Model 1 and Model 2. Quadriceps RME was greater in both Models 1 and 2 than inverse dynamics only at barbell loads of 50–90% one repetition maximum. The highest quadriceps RMEs were 120 ± 36% and 87 ± 28% in Models 1 and 2, respectively, which suggests that barbell squats are only feasible using the Model 2 strategy prioritising gluteus maximus versus hamstrings activation. These results indicate that developing strength in both gluteus maximus and quadriceps is essential for lifting heavy loads in squat exercise.  相似文献   

19.
ABSTRACT

Knee joint coordination during jump landing in different directions is an important consideration for injury prevention. The aim of the current study was to investigate knee and hip kinematics on the non-dominant and dominant limbs during landing. A total of 19 female volleyball athletes performed single-leg jump-landing tests in four directions; forward (0°), diagonal (30° and 60°) and lateral (90°) directions. Kinematic and ground reaction force data were collected using a 10-camera Vicon system and an AMTI force plate. Knee and hip joint angles, and knee angular velocities were calculated using a lower extremity model in Visual3D. A two factor repeated measures ANOVA was performed to explore limb dominance and jump direction. Significant differences were seen between the jump directions for; angular velocity at initial contact (p < 0.001), angular velocity at peak vertical ground reaction force (p < 0.001), and knee flexion excursion (p = 0.016). Knee coordination was observed to be poorer in the early phase of velocity-angle plot during landing in lateral direction compared to forward and diagonal directions. The non-dominant limb seemed to have better coordination than the dominant limb during multi-direction jump landing. Therefore, dominant limbs appear to be at a higher injury risk than non-dominant limbs.  相似文献   

20.
  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号