共查询到20条相似文献，搜索用时 31 毫秒
1.
Some laboratory diffusion tests were conducted with diffusion device to determine the diffusion coefficient of Cr(Ⅵ) ion passing through Dalian red clay samples. The concentrations of Cr(Ⅵ) at different places of the samples were then measured spectrophotometrically after a standing time of 1 000 d. A one-dimensional solute transport equation was used to simulate the transport of Cr(Ⅵ) through clay samples. Back-calculation of diffusion coefficient of Cr(Ⅵ) was made with finite difference method. Parametric analysis was conducted to simulate variations in soil dry density, temperature, pH and standing time. The results show that the method used in this paper is simple and effective. The diffusion coefficient of Cr(Ⅵ) in Dalian red clay varies from 1.50×10-7 cm2/s to 2.08×10-7 cm2/s. After 1 000 d diffusion, the concentration of the source solution drops down to 1.27 mg/L from 62.5 mg/L, and the diffusion distance is only 3.5 cm. Under the assumption that diffusion coefficient is constant, the diffusion effect becomes more obvious with lower density, lower temperature, higher pH value, and much more time. 相似文献
2.
1 Introduction Ahugeamountofliteratureexistsonthestudyofi dentifyingtracemetalionsbymeansofspectropho tometry[1 3] ,fluorimetry[4 6 ] aswellas polarogra phy[7 9] ,whichhaveactiononlocatingtheendpointoftheindicatingreaction .Howeverbothspectropho tometryandfluorimetryareeasytobeinterferedbycolororprecipitation ,whilepolarographyhasanissueofmercurypollution .Thecatalyzingkineticanalysishasthecharacteristicsofhighsensitivityandspeedi ness.Oscillographicpotentiometryisasimpleintu itionisticanal… 相似文献
3.
With InCl3·4H2O being used as raw materials, the precursor of nano-sized In2O3 powder was prepared by hydrolysis, peptization and gelation of InCl3·4H2O. After calcination, nano-sized In2O3 powder was obtained. The powder was characterized by thermo-gravimetric and differential thermal analysis (TG-DTA), X-ray
diffractometry (XRD) and transmission electron microscopy (TEM), respectively. Calculation revealed that the mean crystalline
size increased with increasing the calcination temperature, but crystal lattice distortion rate decreased with the increasing
in the average crystalline size. This indicated that the smaller the particle size, the bigger the crystal lattice distortion,
the worse the crystal growing. The activation energies for growth of nano-sized In2O3 were calculated to be 4.75 kJ·mol−1 at the calcination temperature up to 500°C; and 66.40 kJ·mol−1 at the calcination temperature over 600°C. TEM photos revealed that the addition of the chemical additive (OP-10) greatly
influenced the morphology and size of In2O3 particles. 相似文献
4.
Objective
To investigate the protective effects of parecoxib from oxidative stress induced by hydrogen peroxide (H2O2) in rat astrocytes in vitro.Methods
All experiments included 4 groups: (1) negative control (NC) group, without any treatment; (2) H2O2 treatment group, 100 µmol/L H2O2 treatment for 24 h; (3) and (4) parecoxib pretreatment groups, 80 and 160 µmol/L parecoxib treatment for 24 h, respectively, and then treated with 100 µmol/L H2O2. Several indices were investigated, and the expressions of Bax, Bcl-2, and brain-derived neurotrophic factor (BDNF) were quantified.Results
Compared to the NC group, exposure to H2O2 resulted in significant morphological changes, which could be reversed by pretreatment of parecoxib. In addition, H2O2 treatment led to loss of viability (P=0.026) and increased intracellular reactive oxygen species (ROS) levels (P<0.001), and induced apoptosis (P<0.01) in the primary astrocytes relative to the NC group. However, in the parecoxib pretreatment groups, all the above changes reversed significantly (P<0.05) as compared to the H2O2 treatment group, and were nearly unchanged when compared to the NC group. Mechanical investigation showed that dysregulated Bax, Bcl-2, and BDNF could be implicated in these changes.Conclusions
Our results indicated that parecoxib provided a protective effect from oxidative stress induced by exposure to H2O2.5.
SO4^2- / TiO2-La2O3, a novel solid superacid, was prepared and its catalytic activities at different synthetic conditions are discussed with esterification of n-butanoic acid and n-butyl alcohol as probing reaction. The optimum conditions have also been found, mole ratio of n（La^3＋）：n（Ti^4＋） is 1：34, the soaked consistency of H2SO4 is 0.8 tool/L, the soaked time of HESO4 is 24 h, the calcining temperature is 480 ℃, the calcining time is 3 h. Then it was applied in the catalytic synthesis often important ketals and acetals as catalyst and revealed high catalytic activity. Under these conditions on which the molar ratio of aldehyde/ketone to glycol is l： 1.5, the mass ratio of the catalyst used in the reactants is 0.5%, and the reaction time is 1.0 h, the yields of ketals and acetals can reach 41.4%-95.8%. 相似文献
6.
Groundwater remediation by nanoparticles has收稿日期increasing interest in recent years. This report presents a thorough evaluation of hexavalent chromium removal in aqueous solutions using iron (Fe0) nanoparticles. Cr(Ⅵ) is a major pollutant of groundwater. Zero-valent iron, an important natural reductant of Cr(Ⅵ), is an option in the remediation of contaminated sites, transforming Cr(Ⅵ) to essentially nontoxic Cr(Ⅲ). At a dose of 0.4 g/L, 100% of Cr(Ⅵ) (20 mg/L) was degraded. The Cr(Ⅵ) removal efficiency decreased significantly with increasing initial pH. Different Fe0 type was compared in the same conditions. The reactivity was in the order starch-stabilized Fe0 nanoparticles＞Fe0 nanoparticles＞Fe0 powder＞Fe0 filings. Electrochemical analysis of the reaction process led to the conclusion that Cr(OH)3 should be the final product of Cr(Ⅵ). Iron nanoparticles are good choice for the remediation of heavy metals in groundwater. 相似文献
7.
BaFe12O19 powders with nanocrystaUine sizes were produced by sol-gel auto-combustion method. The precursors were prepared under the molar ratios of citric acid to the metal nitrate of 0.5, 1.0 and 1.5. Appropriate ethylene diamine （C2H8N2） was added in order to adjust pH of 7. The ions distribution of citric acid at different pH explains the effect of citric acid in the starting solution. The XRD patterns of the as-burnt powders and annealing powders show different phases for different citric acid content. In addition, the lattice constants （a, c） derived from X-ray diffraction pattern were changed from 0.58881 nm to 0.58997 nm and 2.32057 nm to 2.32296 nm respectively. The data from VSM indicated that the powder with high citric acid content took on good magnetic properties. Pure single BaFe12O19 of the specific maximum magnetization M（1 T）≈ 49.73 Am^2/kg, the specific remanent magnetization Mr ≈ 30.77 Am^2/kg and the coercive force He≈ 467 kA/m was produced when the molar ratios of citric acid to the metal nitrate was 1.5. 相似文献
8.
In order to carry out decolorization, sludge protein solution, a dark brown close to black solution from activated sludge, was subjected to 60Co γ-ray irradiation in the presence of hydrogen peroxide. UV/Vis spectrophotometric method was used to investigate the effect of H2O2 on the coloration apparent kinetics and rate constants of sludge protein solution under γ-ray irradiation. In addition, the effects of irradiation dose, initial sludge protein solution concentration, and pH value on the decolorization efficiency of sludge protein solution were studied. Results showed that the decolorization apparent kinetics of sludge protein solution was a first-order reaction. The solution decolorization percentage increased with the increase of irradiation dose or the decrease of initial sludge protein solution concentration. The examination results of pH value showed that the sludge protein solution could be more efficiently decolorized in alkaline media than in acid media. Moreover, sensory evaluation and foamability analysis indicated that irradiated samples under H2O2 oxidation showed better sensory score and foamability. 相似文献
9.
Eva-Guadalupe LIZRRAGA-PAULíN Susana-Patricia MIRANDA-CASTRO Ernesto MORENO-MARTíNEZ Alma-Virginia LARA-SAGAHóN Irineo TORRES-PACHECO 《Journal of Zhejiang University. Science. B》2013,14(2):87-96
Objective:To evaluate the effect of chitosan(CH) and hydrogen peroxide(H2O2) seed coatings and seedling sprinklings on two different maize varieties by measuring their phenology,the H2O2 presence,the catalase(CAT) activity,and the protein quantity.Methods:Seven groups of ten seeds for each maize variety were treated with CH(2%(20 g/L) and 0.2%(2 g/L)) or H2O2(8 mmol/L) by coating,sprinkling,or both.Germination and seedling growth were measured.One month after germination,the presence of H2O2 in seedlings in the coated seed treatments was evaluated.Protein content and CAT activity were determined under all treatments.Results:H2O2 seed coating enhanced the germination rate and increased seedling and stem length in the quality protein maize(QPM) variety.Seedlings had a higher emergence velocity under this treatment in both varieties.CH and H2O2 sprinklings did not have an effect on seedling phenology.Exogenous application of H2O2 promoted an increase of endogenous H2O2.CH and H2O2 seedling sprinkling increased the protein content in both maize varieties,while there was no significant effect on the CAT activity of treated seeds and seedlings.Conclusions:CH and H2O2 enhance some phenological and biochemical features of maize depending on their method of application. 相似文献
10.
The metal oxide/nitrogen-doped carbon (NC) compounds zirconium oxide/NC (ZrO2/NC) and cerium oxide/NC (CeO2/NC) were synthesized via the pyrolysis of polyaniline on the metal oxide surface. The characterization of the ZrO2/NC and CeO2/NC catalysts showed more active CO2 reduction reaction activity than that of NC catalyst without metal oxide. Gas chromatography analysis revealed that CO and H2 were the primary products, and no liquid-phase products were detected via proton nuclear magnetic resonance spectroscopy or high-performance liquid chromatography. The maximum Faraday efficiency of ZrO2/NC reached 90% at − 0.73 V (vs. RHE), with the current density of CO at 5.5 mA/cm2; this Faraday efficiency value was higher than that of NC (41%), with the current density of CO at 3.1 mA/cm2. The interaction between the metal oxide and carbon allowed the efficient formation of defect sites, especially imine-type nitrogen, strengthening the adsorption of the key reaction intermediate CO2•− and thus promoting the CO2 reduction reaction.
相似文献11.
12.
对乙酰基偶氮羧光度法测定痕量铬的研究 总被引：1，自引：0，他引：1
研究了对乙酰基偶氮羧与Cr_2O_7~(2-)的褪色反应,建立了一种新的测定痕量Cr(Ⅵ)的光度方法,发现其在高氯酸介质中具有高灵敏的褪色反应,摩尔吸光系数达到3.0×10~6 L·mol~(-1)·cm~(-1)Cr(Ⅵ),量在0～50μg范围内符合比耳定律. 相似文献
13.
14.
Chemically processed Nb-doped SrTiO3 films and properties 总被引：1，自引：0，他引：1
Ming-zhi Yin 《浙江大学学报(A卷英文版)》2006,7(8):1436-1439
Homogeneous, crack-free SrNbxTi1−x
O3 thin films on (110) silicon substrates were successfully fabricated by sol-gel processing. The optimum route and conditions
were systematically investigated. Sr(OAc)2 glacial acctic acid solution, after being refluxed and reacted with tartrate, formed Sr(OAc)2(C4H6O6)2; Ti(OBu)4 formed Ti(OAc)4−x
(AcAc)x after having the ligand partially exchanged with AcAc, while Nb(OC2H5)5 formed (OAc)2Nb(AcAc) (C4H6O6) by exchanging of ligand in glacial acetic acid with (CH3CO)2O. All the metal species after undergoing partial hydrolysis and polymerization with hydroxyl or oxygen, formed SrNbxTi1−x
O13 cluster sol. Methyl cellulose (MCL) caused SrNbxTi1−x
O3 sol to have polymeric structure and easily form films. SrNbxTi1−x
O3 films with perovskite were subsequently formed after being annealed at 650∼750 °C for 60 min in 25% N2+75% H2 (volume ratio) atmosphere. Resistivity of the SrNb0.1Ti0.9O3 films at room temperature was 64 μω·cm, a particular T
2 temperature dependence of the resistivity, from 25 K up to room temperature, was observed.
Project (No. 2002CB613305) supported by the National Basic Research Program (973) of China 相似文献
15.
以木屑为原料,高温热解制备生物炭。以聚乙烯醇为粘结剂,采用混合法将生物炭与果胶复合,并负载磁性,经烘干定型制备果胶包覆的磁性生物炭材料（果胶@生物炭-Fe3O4）。采用扫描电镜（SEM）、X射线衍射（XRD）及N2吸附-脱附（BET）等方法对果胶@生物炭-Fe3O4进行表征,结合吸附实验分析其对Cu2+的吸附特性。结果表明,当生物炭、果胶、Fe3O4质量比为5：1：1,溶液pH值为6,吸附24 h,果胶@生物炭-Fe3O4对Cu2+吸附效果最好;二级动力学方程能较好地描述果胶@生物炭-Fe3O4对Cu2+的吸附过程,Freundlich模型能较好地拟合其吸附行为;SEM结果显示该材料具有不规则的孔隙结构;XRD分析显示纳米Fe3O4是其主要的晶体结构;BET测得其比表面积为25.654 m2·g-1,平均孔径为20.18 nm。 相似文献
16.
Sated rats, previously trained to leverpress for H2O reinforcement on continuous or variable-interval (10-sec or 60-sec) schedules, were given NaCl injections and tested for leverpressing. Under all schedules, responding was an inverted U function of NaCl concentration (0.15M to 3.0M). However, NaCl thirst produced relatively little change in behavior under the VI 60-sec schedule. 相似文献
17.
Hong-xia Che Bo Tian Li-na Bai Li-ming Cheng Li-li Liu Xiao-na Zhang Zhan-mei Jiang Xiao-xi Xu 《Journal of Zhejiang University. Science. B》2015,16(8):672-679
Traditional methods for detecting lactoperoxidase (LP) are complex and time-consuming, so a test strip was made based on the enzymatic reaction principle to enable quick and convenient detection of LP in raw milk. In this study 0.1 mol/L citric acid (CA)/0.2 mol/L disodium hydrogen phosphate (NaP) buffer solution (pH 5.0), 22 mmol/L 3,3'',5,5''-tetramethylbenzidine (TMB), 0.6 mmol/L hydrogen peroxide (H2O2), and 0.5% Tween-20 or 0.3% cetyltrimethyl ammonium bromide (CTAB) were optimal for preparing a quick, sensitive, and accurate LP test strip. The coefficient of variation (CV) of the estimated LP concentrations ranged from 2.47% to 6.72% and the minimum LP concentration detected by the test strip was 1–2 mg/L. Estimates of active LP in sixteen raw milk samples obtained using the test strip or the TMB method showed a good correlation (r=0.9776). So the test strip provides a quick, convenient, and accurate method for detecting the LP concentration of raw milk. 相似文献
18.
In this study,Pd-Mg(Al)-LDH/γ-Al_2O_3 and Pd-Mg(Al)Zr-LDH/γ-Al_2O_3 precursors were synthesized by impregnating Na_2PdCl_4 on Mg(Al)-LDH/γ-Al_2O_3 and Mg(Al)Zr-LDH/γ-Al_2O_3,and then the precursors were calcinated and reduced to obtain Pd-Mg(Al)-MMO/γ-Al_2O_3 and Pd-Mg(Al)Zr-MMO/γ-Al_2O_3 catalysts.Compared with Pd/γ-Al_2O_3 catalyst,the hydrogenation efficiency of Pd-Mg(Al)-MMO/γ-Al_2O_3 and Pd-Mg(Al)Zr-MMO/γ-Al_2O_3 increased by 15.7%and 24.0%,respectively.Moreover,the stability of Pd-Mg(Al)Zr-MMO/γ-Al_2O_3 catalyst was also higher than that of Pd/γ-Al_2O_3.After four runs,the hydrogenation efficiency of Pd/γ-Al_2O_3 decreased from 12.1 to 10.0 g/L,while that of Pd-Mg(Al)Zr-MMO/γ-Al_2O_3 decreased from 15.0 to 14.3 g/L.The active aquinones selectivities of all catalysts were almost 99%.The structures of the catalysts were characterized by X-ray diffraction (XRD),scanning electron microscopy (SEM),N_2 adsorption-desorption,inductively coupled plasma-atomic emission spectrometry (ICP-AES),CO chemisorption analysis,transmission electron microscopy (TEM),temperature-programmed reduction with hydrogen (H_2-TPR),and X-ray photoelectron spectroscopy(XPS).The results indicate that the improved catalytic performance is attributed to the stronger interaction between Pd and Mg(Al)Zr-MMO/γ-Al_2O_3,smaller Pd particle size and higher Pd dispersion.This work develops an effective method to synthesize highly dispersed Pd nanoparticles based on the layered double hydroxides (LDHs) precursor. 相似文献
19.
INTRODUCTION Nitrogen oxide (NOx) is one of the main air pol- lutants found in the flue gases from chemical and power plants belching acid rain and photochemical smog. Over 90 percent of all man-made nitrogen ox- ides that enter our atmosphere are produced by the combustion of various fuels. Compared with the ad- vanced stage of SO2 gas removal technologies devel- opment, the removal of NOx gases is still in the initial stages of development as roughly 90 to 95 percent of NOx emitted i… 相似文献
20.
1 Ｉｎｔｒｏｄｕｃｔｉｏｎ Ａｑｕｅｏｕｓｅｆｆｌｕｅｎｔｓｄｉｓｃｈａｒｇｉｎｇｆｒｏｍｍｉｎｉｎｇａｎｄｏｔｈ ｅｒｉｎｄｕｓｔｒｉｅｓｃｏｎｔａｉｎｈｅａｖｙｍｅｔａｌｓｓｕｃｈａｓｌｅａｄ ,ｃａｄ ｍｉｕｍａｎｄｃｈｒｏｍｉｕｍｉｎｄｉｓｓｏｌｖｅｄａｎｄ ｐａｒｔｉｃｕｌａｔｅｆｏｒｍｓ[1] .Ｔｈｅｉｍｐａｃｔｏｆｕｎｔｒｅａｔｅｄｉｎｄｕｓｔｒｉａｌｅｆｆｌｕｅｎｔｓｏｎｔｈｅａｑｕｅｏｕｓｅｎｖｉｒｏｎｍｅｎｔｈａｓｂｅｅｎｅｘｔｅｎｓｉｖｅｌｙｓｔｕｄｉｅｄ[2 ] .Ｃｏｎｖｅｎｔｉｏ… 相似文献