首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Running economy is a reflection of the amount of inspired oxygen required to maintain a given velocity and is considered a determining factor for running performance. Athletic footwear has been advocated as a mechanism by which running economy can be enhanced. New commercially available footwear has been developed in order to increase energy return, although their efficacy has not been investigated. This study aimed to examine the effects of energy return footwear on running economy in relation to conventional running shoes. Twelve male runners completed 6-min steady-state runs in conventional and energy return footwear. Overall, oxygen consumption (VO2), heart rate, respiratory exchange ratio, shoe comfort and rating of perceived exertion were assessed. Moreover, participants subjectively indicated which shoe condition they preferred for running. Differences in shoe comfort and physiological parameters were examined using Wilcoxon signed-rank tests, whilst shoe preferences were tested using a chi-square analysis. The results showed that VO2 and respiratory exchange ratio were significantly lower, and shoe comfort was significantly greater, in the energy return footwear. Given the relationship between running economy and running performance, these observations indicate that the energy return footwear may be associated with enhanced running performance in comparison to conventional shoes.  相似文献   

2.
The purpose of this study was to determine whether there are differences in the perceived comfort, plantar pressure, and rearfoot motion between laced running shoes and elastic-covered running shoes. Fifteen male amateur runners participated in the study. Each participant was assigned laced running shoes and elastic-covered running shoes for use during the study. The perceived comfort, plantar loading, and rearfoot motion control of each type of shoes during running were recorded. When the laced running shoes and elastic-covered running shoes were compared, the elastic-covered running shoes were given a lower perceived comfort rating in terms of shoe length, width, heel cup fitting, and forefoot cushioning. The elastic-covered running shoes also recorded higher peak plantar pressure in the lateral side of the forefoot, as well as larger maximum rearfoot pronation. Overall, shoelaces can help runners obtain better foot-shoe fit. They increase the perceived comfort, and decrease the maximum pronation and plantar pressure. Moreover, shoelaces may help prevent injury in running by allowing better control of the aforementioned factors.  相似文献   

3.
Despite the growing interest in minimalist shoes, no studies have compared the efficacy of different types of minimalist shoe models in reproducing barefoot running patterns and in eliciting biomechanical changes that make them differ from standard cushioned running shoes. The aim of this study was to investigate the acute effects of different footwear models, marketed as “minimalist” by their manufacturer, on running biomechanics. Six running shoes marketed as barefoot/minimalist models, a standard cushioned shoe and the barefoot condition were tested. Foot–/shoe–ground pressure and three-dimensional lower limb kinematics were measured in experienced rearfoot strike runners while they were running at 3.33 m · s?1 on an instrumented treadmill. Physical and mechanical characteristics of shoes (mass, heel and forefoot sole thickness, shock absorption and flexibility) were measured with laboratory tests. There were significant changes in foot strike pattern (described by the strike index and foot contact angle) and spatio-temporal stride characteristics, whereas only some among the other selected kinematic parameters (i.e. knee angles and hip vertical displacement) changed accordingly. Different types of minimalist footwear models induced different changes. It appears that minimalist footwear with lower heel heights and minimal shock absorption is more effective in replicating barefoot running.  相似文献   

4.
This study investigated whether an increase in the forefoot bending stiffness of a badminton shoe would positively affect agility, comfort and biomechanical variables during badminton-specific movements. Three shoe conditions with identical shoe upper and sole designs with different bending stiffness (Flexible, Regular and Stiff) were used. Elite male badminton players completed an agility test on a standard badminton court involving consecutive lunges in six directions, a comfort test performed by a pair of participants conducting a game-like practice trial and a biomechanics test involving a random assignment of consecutive right forward lunges. No significant differences were found in agility time and biomechanical variables among the three shoes. The players wearing the shoe with a flexible forefoot outsole demonstrated a decreased perception of comfort in the forefoot cushion compared to regular and stiffer conditions during the comfort test (p < 0.05). The results suggested that the modification of forefoot bending stiffness would influence individual perception of comfort but would not influence performance and lower extremity kinematics during the tested badminton-specific tasks. It was concluded that an optimisation of forefoot structure and materials in badminton shoes should consider the individual’s perception to maximise footwear comfort in performance.  相似文献   

5.
ABSTRACT

This study examined the effect of wearing time on comfort perception and landing biomechanics of basketball shoes with different midsole hardness. Fifteen basketball players performed drop landing and layup first step while wearing shoes of different wearing time (new, 2-, 4-, 6- and 8-week) and hardness (soft, medium and hard). Two-way ANOVA with repeated measures was performed on GRF, ankle kinematic and comfort perception variables. Increased wearing time was associated with poorer force attenuation and comfort perception during landing activities (p < 0.05). The new shoes had significantly smaller forefoot (2- and 4-week) and rearfoot peak GRF impacts (all time conditions) in drop landing and smaller rearfoot peak GRF impact (6- and 8-week) in layup; shoes with 4-week of wearing time had significantly better perceptions of forefoot cushioning, forefoot stability, rearfoot cushioning, rearfoot stability and overall comfort than the new shoes (p < 0.05). Compared with hard shoes, the soft shoes had better rearfoot cushioning but poorer forefoot cushioning (p < 0.05). Shoe hardness and wearing time would play an influential role in GRF and comfort perception, but not in ankle kinematics. Although shoe cushioning performance would decrease even after a short wearing period, the best comfort perception was found at 4-week wearing time.  相似文献   

6.
  相似文献   

7.
ABSTRACT

Loading rates have been linked to running injuries, revealing persistent impact features that change direction among three-dimensional axes in different footwear and footstrike patterns. Extracting peak loads from ground reaction forces, however, can neglect the time-varying loading patterns experienced by the runner in each footfall. Following footwear and footstrike manipulations during laboratory-based overground running, we examined three-dimensional loading rate-time features in each direction (X, Y, Z) using principal component analysis. Twenty participants (9 M, 11 F, age: 25.3 ± 3.6 y) were analysed during 14 running trials in each of two footwear (cushioned and minimalist) and three footstrike conditions (forefoot, midfoot, rearfoot). Two principal components (PC) captured the primary loading rate-time features (PC1: 42.5% and PC2: 22.8% explained variance) and revealed interaction among axes, footwear, and footstrike conditions (PC1: F (2.1, 40.1) = 5.6, p = 0.007, η 2 = 0.23; PC2: F (2.0, 38.4) = 62.3, p < 0.001, η 2 = 0.77). Rearfoot running in cushioned footwear attenuated impact loads in the vertical direction, and forefoot running in minimalist footwear attenuated impact loads in the anterior-posterior and medial-lateral directions relative to forefoot running in cushioned shoes. Loading patterns depend on footwear and footstrike interactions, which require shoes that match the runner’s footstrike pattern.  相似文献   

8.
Compared to competitive runners, recreational runners appear to be more prone to injuries, which have been associated with foot strike patterns. Surprisingly, only few studies had examined the foot strike patterns outside laboratories. Therefore, this study compared the foot strike patterns in recreational runners at outdoor tracks with previously reported data. We also investigated the relationship between foot strike pattern, speed, and footwear in this cohort. Among 434 recreational runners analysed, 89.6% of them landed with rearfoot strike (RFS). Only 6.9 and 3.5% landed with midfoot and forefoot, respectively. A significant shift towards non-RFS was observed in our cohort, when compared with previously reported data. When speed increased by 1 m/s, the odds of having forefoot strike and midfoot strike relative to RFS increased by 2.3 times and 2.6 times, respectively. Runners were 9.2 times more likely to run with a forefoot strike in minimalists compared to regular running shoes, although 70% of runners in minimalists continued to use a RFS. These findings suggest that foot strike pattern may differ across running conditions and runners should consider these factors in order to mitigate potential injury.  相似文献   

9.
PurposeTo observe the relative change in foot-strike pattern, pressure characteristics, surface electromyography (sEMG) recordings, and stride characteristics in forefoot strike runners wearing both minimalist and traditional shoes during a 50-km run.MethodsFour experienced minimalist runners were enrolled in this study. Each runner ran a 50-km simulated run in both minimalist shoes and traditional shoes. Pressure data, sEMG recordings, and limited 3D motion capture data were collected during the initial 0.8 km and final 0.8 km for each trial.ResultsThree runners in the traditional shoe type condition and one runner in the minimalist shoe type condition demonstrated a more posterior initial contact area (midfoot strike (MFS) pattern) after the 50-km run, which was supported by increased activity of the tibialis anterior in the pre-contact phase (as per root mean square (RMS) values). In addition, in both pre- and post-run conditions, there were increased peak pressures in the minimalist shoe type, specifically in the medial forefoot. Muscle fatigue as defined by a decreased median frequency observed in isometric, constant force contractions did not correspond with our hypothesis in relation to the observed foot strike change pattern. Finally, step rate increased and step length decreased after the 50-km run in both shoe type conditions.ConclusionMore runners adopted a more posterior initial contact area after the 50-km run in the traditional shoe type than in the minimalist shoe type. The runners who adopted a more posterior initial contact area were more closely associated with an increased median frequency of the medial gastrocnemius, which suggests there may be a change in motor unit recruitment pattern during long-distance, sustained velocity running. The increased peak pressures observed in the medial forefoot in the minimalist shoe type may predispose to metatarsal stress fractures in the setting of improper training.  相似文献   

10.
Plantar loading may influence comfort, performance and injury risk in soccer boots. This study investigated the effect of cleat configuration and insole cushioning levels on perception of comfort and in-shoe plantar pressures at the heel and fifth metatarsal head region. Nine soccer academy players (age 15.7 ± 1.6 years; height 1.80 ± 0.40 m; body mass 71.9 ± 6.1 kg) took part in the study. Two boot models (8 and 6 cleats) and two insoles (Poron and Poron/gel) provided four footwear combinations assessed using pressure insoles during running and 180° turning. Mechanical and comfort perception tests differentiated boot and insole conditions. During biomechanical testing, the Poron insole generally provided lower peak pressures than the Poron/gel insole, particularly during the braking step of the turn. The boot model did not independently influence peak pressures at the fifth metatarsal, and had minimal influence on heel loads. Specific boot-insole combinations performed differently (P < 0.05). The 8-cleat boot and the Poron insole performed best biomechanically and perceptually, but the combined condition did not. Inclusion of kinematic data and improved control of the turning technique are recommended to strengthen future research. The mechanical, perception and biomechanical results highlight the need for a multi-faceted approach in the assessment of footwear.  相似文献   

11.
BackgroundRunning is becoming an increasingly popular activity among Americans with over 50 million participants. Running shoe research and technology has continued to advance with no decrease in overall running injury rates. A growing group of runners are making the choice to try the minimal or barefoot running styles of the pre-modern running shoe era. There is some evidence of decreased forces and torques on the lower extremities with barefoot running, but no clear data regarding how this corresponds with injuries. The purpose of this survey study was to examine factors related to performance and injury in runners who have tried barefoot running.MethodsThe University of Virginia Center for Endurance Sport created a 10-question survey regarding barefoot running that was posted on a variety of running blogs and Facebook pages. Percentages were calculated for each question across all surveys. Five hundred and nine participants responded with over 93% of them incorporating some type of barefoot running into their weekly mileage.ResultsA majority of the participants (53%) viewed barefoot running as a training tool to improve specific aspects of their running. However, close to half (46%) viewed barefoot training as a viable alternative to shoes for logging their miles. A large portion of runners initially tried barefoot running due to the promise of improved efficiency (60%), an attempt to get past injury (53%) and/or the recent media hype around the practice (52%). A large majority (68%) of runners participating in the study experienced no new injuries after starting barefoot running. In fact, most respondents (69%) actually had their previous injuries go away after starting barefoot running. Runners responded that their previous knee (46%), foot (19%), ankle (17%), hip (14%), and low back (14%) injuries all proceeded to improve after starting barefoot running.ConclusionPrior studies have found that barefoot running often changes biomechanics compared to shod running with a hypothesized relationship of decreased injuries. This paper reports the result of a survey of 509 runners. The results suggest that a large percentage of this sample of runners experienced benefits or no serious harm from transitioning to barefoot or minimal shoe running.  相似文献   

12.
The purpose of this study was to determine if minimalist shoes improve time trial performance of trained distance runners and if changes in running economy, shoe mass, stride length, stride rate and footfall pattern were related to any difference in performance. Twenty-six trained runners performed three 6-min sub-maximal treadmill runs at 11, 13 and 15 km·h?1 in minimalist and conventional shoes while running economy, stride length, stride rate and footfall pattern were assessed. They then performed a 5-km time trial. In the minimalist shoe, runners completed the trial in less time (effect size 0.20 ± 0.12), were more economical during sub-maximal running (effect size 0.33 ± 0.14) and decreased stride length (effect size 0.22 ± 0.10) and increased stride rate (effect size 0.22 ± 0.11). All but one runner ran with a rearfoot footfall in the minimalist shoe. Improvements in time trial performance were associated with improvements in running economy at 15 km·h?1 (r = 0.58), with 79% of the improved economy accounted for by reduced shoe mass (P < 0.05). The results suggest that running in minimalist shoes improves running economy and 5-km running performance.  相似文献   

13.
This study investigated the normal and parallel ground reaction forces during downhill and uphill running in habitual forefoot strike and habitual rearfoot strike (RFS) runners. Fifteen habitual forefoot strike and 15 habitual RFS recreational male runners ran at 3 m/s ± 5% during level, uphill and downhill overground running on a ramp mounted at 6° and 9°. Results showed that forefoot strike runners had no visible impact peak in all running conditions, while the impact peaks only decreased during the uphill conditions in RFS runners. Active peaks decreased during the downhill conditions in forefoot strike runners while active loading rates increased during downhill conditions in RFS runners. Compared to the level condition, parallel braking peaks were larger during downhill conditions and parallel propulsive peaks were larger during uphill conditions. Combined with previous biomechanics studies, our findings suggest that forefoot strike running may be an effective strategy to reduce impacts, especially during downhill running. These findings may have further implications towards injury management and prevention.  相似文献   

14.
PurposeThis study examined variation in foot strike types, lower extremity kinematics, and arch height and stiffness among Tarahumara Indians from the Sierra Tarahumara, Mexico.MethodsHigh speed video was used to study the kinematics of 23 individuals, 13 who habitually wear traditional minimal running sandals (huaraches), and 10 who habitually wear modern, conventional running shoes with elevated, cushioned heels and arch support. Measurements of foot shape and arch stiffness were taken on these individuals plus an additional sample of 12 individuals.ResultsMinimally shod Tarahumara exhibit much variation with 40% primarily using midfoot strikes, 30% primarily using forefoot strikes, and 30% primarily using rearfoot strikes. In contrast, 75% of the conventionally shod Tarahumara primarily used rearfoot strikes, and 25% primarily used midfoot strikes. Individuals who used forefoot or midfoot strikes landed with significantly more plantarflexed ankles, flexed knees, and flexed hips than runners who used rearfoot strikes. Foot measurements indicate that conventionally shod Tarahumara also have significantly less stiff arches than those wearing minimal shoes.ConclusionThese data reinforce earlier studies that there is variation among foot strike patterns among minimally shod runners, but also support the hypothesis that foot stiffness and important aspects of running form, including foot strike, differ between runners who grow up using minimal versus modern, conventional footwear.  相似文献   

15.
PurposeThis study aimed to determine the independent effect of the curved carbon-fiber plate in the Nike Vaporfly 4% shoe on running economy and running biomechanics.MethodsFifteen healthy male runners completed a metabolic protocol and a biomechanics protocol. In both protocols participants wore 2 different shoes, an intact Nike Vaporfly 4% (VFintact) and a cut Nike Vaporfly 4% (VFcut). The VFcut had 6 medio-lateral cuts through the carbon-fiber plate in the forefoot to reduce the effectiveness of the plate. In the metabolic protocol, participants ran at 14 km/h for 5 min, twice with each shoe, on a force-measuring treadmill while we measured metabolic rate. In the biomechanics protocol, participants ran across a runway with embedded force plates at 14 km/h. We calculated running economy, kinetics, and lower limb joint mechanics.ResultsRunning economy did not significantly differ between shoe conditions (on average, 0.55% ± 1.77% (mean ± SD)) worse in the VFcut compared to the VFintact; 95% confidence interval (–1.44% to 0.40%). Biomechanical differences were only found in the metatarsophalangeal (MTP) joint with increased MTP dorsiflexion angle, angular velocity, and negative power in the VFcut. Contact time was 1% longer in the VFintact.ConclusionCutting the carbon-fiber plate and reducing the longitudinal bending stiffness did not have a significant effect on the energy savings in the Nike Vaporfly 4%. This suggests that the plate's stiffening effect on the MTP joint plays a limited role in the reported energy savings, and instead savings are likely from a combination and interaction of the foam, geometry, and plate.  相似文献   

16.
A new model of running shoes which features an extreme cushioning and an oversized midsole, known as the maximalist (MAX) was launched. This design claims to provide excellent shock absorption, particularly during downhill running. This study sought to assess the effects of MAX on the external impact loading, footstrike pattern, and stride length during level ground and downhill running on an instrumented treadmill. Twenty-seven distance runners completed four 5-minute running trials in the two footwear conditions (MAX and traditional running shoes (TRS)) on a level surface (0%) and downhill (10%-declination). Average and instantaneous loading rates (ILRs), footstrike pattern and stride length were measured during the last minute of each running trial. A 12% greater ILR was observed in downhill running with MAX (p?=?.045; Cohen’s d?=?0.44) as compared to TRS. No significant difference was found in the loading rates (p?>?.589) and stride length (p?=?.924) when running on a level surface. Majority of runners maintained the same footstrike pattern in both footwear conditions. Findings of this study suggested that MAX might not reduce the external impact loading in runners during level and downhill treadmill running. Instead, this type of footwear may conceivably increase the external impact loading during downhill treadmill running.  相似文献   

17.
This study investigated whether male runners improve running performance, running economy, ankle plantar flexor strength, and alter running biomechanics and lower limb bone mineral density when gradually transitioning to using minimalist shoes for 100% of weekly running. The study was a planned follow-up of runners (n?=?50) who transitioned to minimalist or conventional shoes for 35% of weekly structured training in a previous 6-week randomised controlled trial. In that trial, running performance and economy improved more with minimalist shoes than conventional shoes. Runners in each group were instructed to continue running in their allocated shoe during their own preferred training programme for a further 20 weeks while increasing allocated shoe use to 100% of weekly training. At the 20-week follow-up, minimalist shoes did not affect performance (effect size: 0.19; p?=?0.218), running economy (effect size: ≤?0.24; p?≥?0.388), stride rate or length (effect size: ≤?0.12; p?≥?0.550), foot strike (effect size: ≤?0.25; p?≥?0.366), or bone mineral density (effect size: ≤?0.40; p?≥?0.319). Minimalist shoes increased plantar flexor strength more than conventional shoes when runners trained with greater mean weekly training distances (shoe*distance interaction: p?=?0.036). After greater improvements with minimalist shoes during the initial six weeks of a structured training programme, increasing minimalist shoe use from 35% to 100% over 20 weeks, when runners use their own preferred training programme, did not further improve performance, running economy or alter running biomechanics and lower limb bone mineral density. Minimalist shoes improved plantar flexor strength more than conventional shoes in runners with greater weekly training distances.  相似文献   

18.
Abstract

Ethylene vinyl acetate and polyurethane are widely used materials for shoe midsoles. The present study investigated the durability of running shoes made from ethylene vinyl acetate and one type of polyurethane (polyurethane-1), which have similar hardness and density, and another type of polyurethane (polyurethane-2), which has high hardness/density. All shoes differed from one another only in terms of the midsole material used. Eight male runners participated in the present study and used the shoes to run 500 km (10 × 50 km). The cushioning and energy return characteristics of each shoe were measured using an impact tester before and after each 50-km run. The results showed that as the running distance increased, the peak force of midsole materials changed with different patterns. Ethylene vinyl acetate and polyurethane-1 showed greater cushioning than polyurethane-2 over 500 km (ethylene vinyl acetate, 918.2–968.0 N; polyurethane-1, 909.6–972.9 N; polyurethane-2, 983.0–1105.6 N). Polyurethane-1 showed greater cushioning from 200 km to 300 km compared with 0 km (0 km, 972.9 ± 66.3 N; 200 km, 909.6 ± 61.2 N; 250 km, 921.9 ± 51.2 N; 300 km, 924.6 ± 51.9 N). The cushioning of ethylene vinyl acetate shoes was diminished after 500 km compared with that at 0 km (968.0 ± 25.9 N vs. 921.1 ± 20.1 N). Ethylene vinyl acetate resulted in greater energy returns than polyurethane. Both foam category and hardness/density affected the critical biomechanical properties of running shoes.  相似文献   

19.
Assessing comfort of running footwear reliably is challenging. The purpose of this study was to compare the intra-rater reliability between different assessment types, to calculate intra-individual reliability scores and to evaluate the effect of rater selection based on individual reliability scores on group level reliability. Three assessment types: ranking, Visual Analogue Scale (VAS), and Likert Scale (LS) were provided twice in six separate sessions among 30 participants, who assessed comfort of five shoes after treadmill running. Spearman's rho provided an evaluation of inter-session relative reliability and typical error as a measure of absolute reliability for each assessment type. Ranking (r?=?0.70, 95% confidence interval [CI] 0.61–0.78) yielded the highest relative reliability for overall comfort, followed by VAS (r?=?0.67, 95% CI 0.56–0.75) and LS (r?=?0.63, 95% CI 0.52–0.72), with large-scale overlaps of CIs between assessment types. The same order of assessment types was found for the percentage of reliable raters (r?≥?0.7) with 60% in ranking scale, 47% in VAS and 37% in LS. Forming subgroups corresponding to the intra-individual reliability substantially increased group level reliabilities. Based on measures of relative reliability, an extreme reduction in resolution as provided by the ranking from pairwise comparisons seems to be a valuable tool in footwear comfort assessments if assessment time is of minor importance. No preference can be provided for the two investigated rating scales. Besides the assessment type, a selection of the best raters in additional reliability checks seems to be a prerequisite for further comfort-related studies.  相似文献   

20.
Shoe manufacturers launch running shoes with increased (e.g., maximalists) or decreased (e.g., minimalists) midsole thickness and claim that they may prevent running injury. Previous studies tested footwear models with different midsole thicknesses on the market but the shoe construct was not strictly comparable. Therefore, in the present study, we examined the effect of midsole thickness, from 1-mm to 29-mm, in a standard test shoe prototype on the vertical loading rates, footstrike angle and temporal spatial parameters in distance runners. Fifteen male habitual rearfoot strikers were recruited from local running clubs. They were asked to run on an instrumented treadmill in shoes with different midsole thicknesses. We found significant interactions between midsole thickness with vertical loading rates (p < 0.001), footstrike angle (p = 0.013), contact time (p < 0.001), cadence (p = 0.003), and stride length (p = 0.004). Specifically, shoes with thinner midsole (1- and 5-mm) significantly increased the vertical loading rates and shortened the contact time, when compared with thicker midsole shoes (25- and 29-mm). However, we did not observe any substantial differences in the footstrike angle, cadence and stride length between other shod conditions. The present study provides biomechanical data regarding the relationship between full spectrum midsole thicknesses and running biomechanics in a group of rearfoot strikers.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号