共查询到17条相似文献,搜索用时 515 毫秒
1.
基于脉冲耦合神经网络,提出了一种有效的脉冲噪声图像滤波算法。利用PCNN相似群神经元同步发放脉冲的特性检测噪声点,并利用中值滤波对噪声点进行滤波。仿真表明,该方法对不同强度的噪声图像均体现了较好的滤波性能,在去噪效果和运行效率上同其它方法相比具有明显优势。 相似文献
2.
3.
二阶线形脉冲微分方程的振动性 总被引:2,自引:0,他引:2
郭承军 《广东技术师范学院学报》2004,(4):10-13
本文主要研究了一类二阶线性脉冲微分方程的振动性质 ,得到了一些充分判据 ,并给出了例子 ,说明脉冲对振动性态所起的作用 相似文献
4.
在使用计算机对外部脉冲进行计数的过程中 ,由于干扰脉冲的存在 ,计算机得到的脉冲数往往比实际的脉冲数要多 .为了得到脉冲的准确数值 ,必须想办法把干扰脉冲去掉 .本文介绍了从硬件和软件两方面去掉干扰脉冲的方法 . 相似文献
5.
6.
本文以数字系统时最常用的计数器作为实例,介绍了如何对脉冲异步时序逻辑电路进行分析和设计。为电子技术人员在数字系统或计算机硬件的研发中提供了一个有序的思路。 相似文献
7.
根据电火花数控线切割机床的工作要求,设计一种脉冲宽度和脉冲间隔调节范围大,输出功率可以选择调节,工作稳定可靠的数控高频脉冲电源。重点讨论主控电路的结构和工作原理。 相似文献
8.
用单片机设计脉冲信号发生器,具有定量脉冲、连续脉冲两种输出功能,给出电路图和详细程序框图。 相似文献
9.
针对锅炉积灰和结渣严重的问题,通过对其危害性分析,提出研究实用高效安全的吹灰装置是提高锅炉热效率的关键.通过介绍燃气脉冲吹灰技术以及对比该技术与其它吹灰方式的作用范围和使用现状,提出燃气脉冲吹灰装置的优势,并对其做了技术经济指标上的分析. 相似文献
10.
11.
本文介绍了一种新型脉搏快速测量系统。该系统的数据采集部分采用光电传感器,使测量无接触,从而提高精确性;数据处理部分采用了Altera公司的复杂可编程逻辑器件(CPLD),集成度高,数据处理功能强大。设计方法采用VHDL硬件描述语言,在EDA软件平台MAX PLUS Ⅱ中进行。文中给出了系统的工作原理、电路组成及时序仿真结果。 相似文献
12.
13.
Influence of input acoustic power on regenerator's performance 总被引:2,自引:0,他引:2
TANG Ke HUANG Zhong-jie JIN Tao BAO Rui CHEN Guo-bang 《浙江大学学报(A卷英文版)》2007,8(9):1452-1456
Performance of a pulse tube cooler significantly depends on the efficient operation ofits regenerator. Influence of input acoustic power on regenerator's performance is simulated and analyzed with simple harmonic analysis method. Given regenerator's dimensions and pressure ratio, there is an optimal input acoustic power for achieving a highest coefficient of performance, due to a compromise between relative time-averaged total energy flux in regenerator and relative acoustic power at regenerator's cold end. Additionally, optimal dimensions of regenerator are also estimated and presented for different input acoustic powers. The computed optimal diameter obviously increases with increase of input acoustic power, while the optimal length decreases slightly, and as a result, a larger input acoustic power requires a smaller aspect ratio (length over diameter). 相似文献
14.
A valveless linear compressor was built up to drive a self-made two-stage pulse tube cryocooler. With a designed maximum swept volume of 60 cm^3, the compressor can provide the cryocooler with a pressure volume (PV) power of 400 W. Preliminary measurements of the compressor indicated that both an efficiency of 35%-55% and a pressure ratio of 1.3-1.4 could be obtained. The two-stage pulse tube cryocooler driven by this compressor achieved the lowest temperature of 14.2 K. 相似文献
15.
本文介绍基于Windows 2000 WDM(Windows Driver Model,Windows驱动模型)开发线切割无阻脉冲电源的中断驱动程序。首先对WDM驱动程序模型及基本结构作简要介绍,然后具体介绍该驱动程序的编写过程。 相似文献
16.
连鸿丹 《九江职业技术学院学报》2005,(3):15-16
本文通过玻壳模具镀金工艺的分析研究,比较了直接镀金工艺和镀镍/金工艺的实施方案,并通过一系列可靠性试验,得出镍脸镀层具有更好的抗蚀能力和焊接可靠性的结论。 相似文献
17.
介绍了一种以模块化设计为思路而研制的多功能弧焊电源,可以方便地实现PCB板的替换与维护。通过采用PWM脉宽调速送丝系统,在CO2焊时实现稳定送丝,降低了飞溅。TIG焊时的一次引弧成功率高。 相似文献