首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
ABSTRACT

The aims of this study were twofold: firstly, to compare lower limb kinematic and kinetic variables during a sprint and 90° cutting task between two averaging methods of obtaining discrete data (peak of average profile vs. average of individual trial peaks); secondly, to determine the effect of averaging methods on participant ranking of each variable within a group. Twenty-two participants, from multiple sports, performed a 90° cut, whereby lower limb kinematics and kinetics were assessed via 3D motion and ground reaction force (GRF) analysis. Six of the eight dependent variables (vertical and horizontal GRF; hip flexor, knee flexor, and knee abduction moments, and knee abduction angle) were significantly greater (p ≤ 0.001, g = 0.10–0.37, 2.74–10.40%) when expressed as an average of trial peaks compared to peak of average profiles. Trivial (g ≤ 0.04) and minimal differences (≤ 0.94%) were observed in peak hip and knee flexion angle between averaging methods. Very strong correlations (ρ ≥ 0.901, p < 0.001) were observed for rankings of participants between averaging methods for all variables. Practitioners and researchers should obtain discrete data based on the average of trial peaks because it is not influenced by misalignments and variations in trial peak locations, in contrast to the peak from average profile.  相似文献   

2.
This study investigated the three-dimensional (3-D) pedaling kinematics using a noncircular chainring system and a conventional system. Five cyclists pedaled at their preferred cadence at a workload of 300 W using two crank systems. Flexion/extension of the hip, knee and ankle as well as shank rotation, foot adduction/abduction, and pedal angle were measured. Joint range of motion (ROM) and angular displacements were compared between the systems. Sagittal plane ROM was significantly greater (P < 0.05) at the hip (noncircular system = 39 ± 3°; conventional system = 34 ± 4°) the knee (noncircular system = 69 ± 4°; conventional system = 57 ± 10°), and ankle (noncircular system = 21 ± 2°; conventional system = 19 ± 4°) resulting in greater pedal ROM (noncircular system = 43 ± 3°; conventional system = 37 ± 5°) while using the noncircular system. Shank rotation ROM was significantly lower (P < 0.05) while using the noncircular chainring (noncircular system = 10 ± 1°; conventional system = 14 ± 1°). These results support a significant effect of the noncircular chainring system on pedaling kinematics during submaximal exercise.  相似文献   

3.
Many sports associated with anterior cruciate ligament (ACL) injury require athletes attend to a ball during participation. We investigated effects of attending to a ball on lower extremity mechanics during a side-cut maneuver and if these effects are consistent for males and females. Sagittal and frontal plane hip and knee kinematics and joint moments were measured during side-cut maneuvers in 19 male and 19 female National Collegiate Athletic Association division III basketball players. Participants also experienced two side-cut conditions that required attention to a ball. Our results did not indicate that the effect of attention varies with gender. However, during side-cut conditions while attending to a ball, internal knee adductor moment was 20% greater (p = 0.03) and peak knee flexion angle was 4° larger (p < 0.01). Females demonstrated 5° less hip flexion (p = 0.046), 12° less knee flexion (p < 0.01), and 4° more knee abduction (p = 0.026) at initial contact during all side-cut conditions than males. Attention to a ball may affect lower extremity mechanics relevant to ACL injury. The validity of laboratory studies of lower extremity mechanics for sports that include attention to a ball may be increased if participants are required to attend to a ball during the task.  相似文献   

4.
It is commonly believed that a torn ACL or a damaged meniscus may be associated with altered knee joint movements. The purpose of this study was to measure the tibiofemoral kinematics of ACL deficiency with concomitant meniscus deficiency. Unilateral knees of 28 ACL deficient participants were studied while ascending stairs. Among these patients, 6 had isolated ACL injuries (group I), 8 had combined ACL and medial meniscus injuries (group II), 8 had combined ACL and lateral meniscus injuries (group III) and 6 had combined ACL and medial-lateral meniscus injuries (group IV). Both knees were then scanned during a stair climb activity using single fluoroscopic image system. Knee kinematics were measured at 0°, 5°, 10°, 15°, 30° and 60° of flexion during ascending stairs. At 0°, 15° and 30° flexion of the knee, the tibia rotated externally by 13.9 ± 6.1°,13.8 ± 9.5° and 15.9 ± 9.8° in Group I. Group II and III exhibited decreased external rotation from 60° to full extension. Statistical differences were found in 0°, 15°and 30° of flexion for the 2 groups compared with Group I. In general, the tibia showed anterior translation with respect to the femur during ascending stairs. It was further determined that Group III had larger anterior translation compared with Group IV at 0° and 5° of flexion (?6.9 ± 1.7 mm vs. 6.2 ± 11.3 mm, P = 0.041; ?9.0 ± 1.8 mm vs. 8.1 ± 13.4 mm, P = 0.044). During ascending stairs the ACL deficient knee with different deficiencies in the meniscus will show significantly different kinematics compared with that of uninjured contralateral knee. Considering the varying effect of meniscus injuries on knee joint kinematics, future studies should concentrate on specific treatment of patients with combined ACL and meniscus injuries to protect the joint from abnormal kinematics and subsequent postoperative degeneration.  相似文献   

5.
It is unknown whether skilled golfers will modify their kinematics when using drivers of different shaft properties. This study aimed to firstly determine if golf swing kinematics and swing parameters and related launch conditions differed when using modified drivers, then secondly, determine which kinematics were associated with clubhead speed. Twenty high level amateur male golfers (M ± SD: handicap = 1.9 ± 1.9 score) had their three-dimensional (3D) trunk and wrist kinematics collected for two driver trials. Swing parameters and related launch conditions were collected using a launch monitor. A one-way repeated measures ANOVA revealed significant (p ≤ 0.003) between driver differences; specifically, faster trunk axial rotation velocity and an early wrist release for the low kick point driver. Launch angle was shown to be 2° lower for the high kick point driver. Regression models for both drivers explained a significant amount of variance (60–67%) in clubhead speed. Wrist kinematics were most associated with clubhead speed, indicating the importance of the wrists in producing clubhead speed regardless of driver shaft properties.  相似文献   

6.
ABSTRACT

The aim of this study was to assess the influence of different bike positions on the perception of fatigue, pain and comfort. Twenty cyclists underwent three tests that involved cycling for 45 min at their individual 50% peak aerobic power output while adopting different positions on the bike. Participants performed the cycling tests adopting three positions defined by two parameters (knee flexion angle [20°, 30°, 40°] and trunk flexion angle [35°, 45°, 55°]) in random order. Angles were measured using a 2D motion analysis system during cycling and applying Fonda’s correction factor. Perceptions of comfort, fatigue and pain were reported before the end of each test. The combination of 40° knee flexion and 35° trunk flexion was perceived as the most uncomfortable position. Moreover, greater knee flexion had a negative effect on trunk comfort, accompanied by greater levels of fatigue and pain perception in the anterior part of the thigh and knee. In conclusion, cyclists perceived the most comfortable position to be when the saddle height was within the recommended knee angle (30° calculated from the offset position or 40 ± 4.0° of absolute value). Upright trunk was found to be the most comfortable position for recreational cyclists, where aerodynamics is not so important. Cyclists’ bike perceptions should be taken into account when it comes to choosing the most beneficial position, since this can play a role in injury prevention and enhance cycling performance.  相似文献   

7.
This study presents the kinematics and plantar pressure characteristics of eight elite national-level badminton athletes and eight recreational college-level badminton players while performing a right-forward lunge movement in a laboratory-simulated badminton court. The hypothesis was that recreational players would be significantly different from elite players in kinematics and plantar pressure measures. Vicon® motion capture and Novel® insole plantar pressure measurement were simultaneously taken to record the lower extremity kinematics and foot loading during stance. Recreational players showed significantly higher peak pressure in the lateral forefoot (P = 0.002) and force time integral in the lateral forefoot (P = 0.013) and other toes (P = 0.005). Elite athletes showed higher peak pressure in the medial forefoot (P = 0.003), hallux (P = 0.037) and force time integral in the medial forefoot (P = 0.009). The difference in landing techniques for the lunge step between elite athletes and recreational players was observed with peak ankle eversion (?38.2°±2.4° for athletes and ?11.1°±3.9° for players, P = 0.015); smaller knee range of motion in the coronal and transverse planes, with differences in peak knee adduction (28.9°±6.8° for athletes and 15.7°±6.2° for players, P = 0.031); peak knee internal rotation (20.3°±1.3° for athletes and 11.8°±3.2° for players, P = 0.029) and peak hip flexion (77.3°±4.1° for athletes and 91.3°±9.3° for players, P = 0.037).  相似文献   

8.
Abstract

Knee functional disorders are one of the most common lower extremity non-traumatic injuries reported by cyclists. Incorrect bicycle configuration may predispose cyclist to injury but the evidence of an effect of saddle setback on knee pain remains inconclusive. The aim of this study was to determine the effect of saddle setback on knee joint forces during pedalling using a musculoskeletal modelling approach. Ten cyclists were assessed under three saddle setback conditions (range of changes in saddle position ~6 cm) while pedalling at a steady power output of 200 W and cadence of 90 rpm. A cycling musculoskeletal model was developed and knee joint forces were estimated using an inverse dynamics method associated with a static optimisation procedure. Our results indicate that moving the saddle forwards was not associated with an increase of patellofemoral joint forces. On the contrary, the tibiofemoral mean and peak compression force were 14 and 15% higher in the Backward than in the Forward condition, respectively. The peak compression force was related to neither pedal force nor quadriceps muscle force but coincided with the eccentric contraction of knee flexor muscles. These findings should benefit bike fitting practitioners and coaches in the design of specific training/rehabilitation protocols.  相似文献   

9.
The aim of the study was to determine the accuracy and variability of an electromagnetic device in measuring spinal kinematics on a traditional and replica rowing ergometer. Kinematic data collected from the 3-Space FastrakTM system using a Standard Concept II ergometer were compared with a replica ergometer that was in part, composed of non-ferrous materials (modified ergometer). The Fastrak's sensors were fixed to a wooden “spine” with known angles (as measured by an inclinometer). The mean inclinometer angle from four sensors (1 ± 0.2°) was significantly different than the mean angle recorded on the standard ergometer ( ? 5.4 ± 3.4°) (p = 0.007) whilst the angles recorded on the modified ergometer (1.4 ± 0.8°) were statistically equivalent to the inclinometer recordings (p = 0.660). These results indicate that the presence of ferrous material in a standard ergometer reduced the accuracy and increased the variability of data collected with the electromagnetic device. However, information collected on largely non-ferrous ergometers can provide coaches, biomechanists and clinicians with a quick and effective way to measure trunk kinematics during ergometer rowing.  相似文献   

10.
Whole body vibration (WBV) is used as a training method but its physical risk is not yet clear. Hence, the aim of this study is to assess the exposure to WBV by a measure of acceleration at the lower limb under dynamic and static postural conditions. The hypothesis of this paper is that this assessment is influenced by the frequency, position, and movement of the body. Fifteen healthy males are exposed to vertical sinusoidal vibration at different frequencies (20–60 Hz), while adopting three different static postures (knee extension angle: 180°, 120° and 90°) or performing a dynamic half-squat exercise. Accelerations at input source and at three joints of the lower limb (ankle, knee, and hip) are measured using skin-mounted accelerometers. Acceleration values (g) in static conditions show a decrease in the vibrational dose when it is measured at a more proximal location in the lower extremity. The results of the performed statistical test show statistically significant differences (p < 0.05) in the transmissibility values caused by the frequency, the position, and to the presence of the movement and its direction at the different conditions. The results confirm the initial hypothesis and justify the importance of a vibration assessment in dynamic conditions.  相似文献   

11.
Kinematic measurements conducted during bike set-ups utilise either static or dynamic measures. There is currently limited data on reliability of static and dynamic measures nor consensus on which is the optimal method. The aim of the study was to assess the difference between static and dynamic measures of the ankle, knee, hip, shoulder and elbow. Nineteen subjects performed three separate trials for a 10-min duration at a fixed workload (70% of peak power output). Static measures were taken with a standard goniometer (GM), an inclinometer (IM) and dynamic three-dimensional motion capture (3DMC) using an eight camera motion capture system. Static and dynamic joint angles were compared over the three trials to assess repeatability of the measurements and differences between static and dynamic values. There was a positive correlation between GM and IM measures for all joints. Only the knee, shoulder and elbow were positively correlated between GM and 3DMC, and IM and 3DMC. Although all three instruments were reliable, 3D motion analysis utilised different landmarks for most joints and produced different means. Changes in knee flexion angle from static to dynamic are attributable to changes in the positioning of the foot. Controlling for this factor, the differences are negated. It was demonstrated that 3DMC is not interchangeable with GM and IM, and it is recommended that 3DMC develop independent reference values for bicycle configuration.  相似文献   

12.
ABSTRACT

Female volleyball athletes incorporate dynamic and static stretching into a warm-up, with evidence generally supporting dynamic stretching to improve performance. However, the effects of these stretching practices on injury risk during subsequent volleyball manoeuvres have yet to be fully elucidated in the warm-up literature. Three-dimensional kinematic data associated with non-contact, lower extremity injury were recorded on 12 female collegiate club volleyball athletes during unilateral landing tasks on the dominant and non-dominant limb. Participants performed landings as part of a volleyball-simulated manoeuvre prior to and post-dynamic (DWU) and combined dynamic-static (CDS) warm-ups. A significant reduction in non-dominant hip adduction angle was found at 15 min post CDS warm-up (p = 0.016; d = 0.38), however, no other warm-up differences were detected. The non-dominant limb demonstrated greater knee abduction (p = 0.006; d = 0.69) and internal rotation angle (p = 0.004; d = 0.88), suggesting that this limb demonstrates more risky landing patterns that are potentially due to altered trunk positioning upon landing. The results show that the majority of selected landing kinematics are unaffected by additional static stretching to a dynamic warm-up and that the non-dominant limb may be at a higher injury risk in female volleyball athletes.  相似文献   

13.
Abstract

The objective of this study was to compare the three-dimensional lower extremity running kinematics of young adult runners and elderly runners. Seventeen elderly adults (age 67–73 years) and 17 young adults (age 26–36 years) ran at 3.1 m · s?1 on a treadmill while the movements of the lower extremity during the stance phase were recorded at 120 Hz using three-dimensional video. The three-dimensional kinematics of the lower limb segments and of the ankle and knee joints were determined, and selected variables were calculated to describe the movement. Our results suggest that elderly runners have a different movement pattern of the lower extremity from that of young adults during the stance phase of running. Compared with the young adults, the elderly runners had a substantial decrease in stride length (1.97 vs. 2.23 m; P = 0.01), an increase in stride frequency (1.58 vs. 1.37 Hz; P = 0.002), less knee flexion/extension range of motion (26 vs. 33°; P = 0.002), less tibial internal/external rotation range of motion (9 vs. 12°; P < 0.001), larger external rotation angle of the foot segment (toe-out angle) at the heel strike (?5.8 vs. ?1.0°; P = 0.009), and greater asynchronies between the ankle and knee movements during running. These results may help to explain why elderly individuals could be more susceptible to running-related injuries.  相似文献   

14.
Abstract

Lumbar spine injury is common in rowers and examination of spinal kinematics may improve the understanding of this injury's prevalence. This study aimed to examine the range of frontal plane angular displacement (AD) in the lumbar spine at L3 during ergometer rowing and to investigate the effect of exhaustion on lumbar kinematics. Twelve elite male rowers completed an incremental test on a Concept 2 ergometer. Lumbar AD at L3 was measured continually throughout the rowing trial using a Spectrotilt Inclinometer and blood lactate was sampled at 3-minute intervals. AD of between 4.7° and 8.8° was recorded at L3. There was a significant increase in AD between the first and last stage of the test (mean increase = 4.1 ± 1.94°, 95% Confidence Interval [CI], 2.9 to 5.3°, t = 7.36, P = 0.000014). Incremental rise in AD was associated with an incremental rise in blood lactate but regression confirmed that only stroke rate was a significant predictor for increasing angle. Thus there is a statistically significant increase in frontal plane AD at L3 over the course of an incremental exercise test although it cannot be confirmed if this is as a result of exhaustion. The values of AD confirm that there is motion in the frontal plane in ergometer rowing.  相似文献   

15.
Landing with a low knee flexion angle after volleyball block jumps may be associated with an increased risk of anterior cruciate ligament (ACL) injury. The aim of the present study was to identify the types of volleyball landings after blocks where the knee flexion angle is found to be under a critical knee flexion angle value of 30° at the instant of the first peak of the ground reaction force (GRF). Synchronized kinematic and kinetic data were collected for each trial. T-tests were used to determine if each knee flexion angle at the instant of the peak GRF was significantly different from the critical value of 30°. A repeated measures ANOVA was used to compare knee flexion angle, time to first peak and the magnitude of the first peak of the resultant GRF and knee stiffness. Significantly lower knee flexion angles were found in the “go” landing (p?=?.01, ES?=?0.6) and the “reverse” landing (p?=?.02, ES?=?0.6) only. The results for knee flexion angle and GRF parameters indicated a significant difference between a “reverse” and “go” and other types of landings, except the “side stick” landing for GRF. The “reverse” and “go” landings may present a risk for ACL injury due to the single-leg landing of these activities that have an associated mediolateral movement.  相似文献   

16.
Technique changes in cyclists are not well described during exhaustive exercise. Therefore the aim of the present study was to analyze pedaling technique during an incremental cycling test to exhaustion. Eleven cyclists performed an incremental cycling test to exhaustion. Pedal force and joint kinematics were acquired during the last three stages of the test (75%, 90% and 100% of the maximal power output). Inverse dynamics was conducted to calculate the net joint moments at the hip, knee and ankle joints. Knee joint had an increased contribution to the total net joint moments with the increase of workload (5–8% increase, p < 0.01). Total average absolute joint moment and knee joint moment increased during the test (25% and 39%, for p < 0.01, respectively). Increases in plantar flexor moment (32%, p < 0.01), knee (54%, p < 0.01) and hip flexor moments (42%, p = 0.02) were found. Higher dorsiflexion (2%, for p = 0.03) and increased range of motion (19%, for p = 0.02) were observed for the ankle joint. The hip joint had an increased flexion angle (2%, for p < 0.01) and a reduced range of motion (3%, for p = 0.04) with the increase of workload. Differences in joint kinetics and kinematics indicate that pedaling technique was affected by the combined fatigue and workload effects.  相似文献   

17.
Abstract

The current investigation aimed to determine whether there are differences in ball velocity and 3D kinematics when performing maximal kicks with the dominant and non-dominant limbs. Seventeen male academy soccer players performed maximal speed place kicks with their dominant and the non-dominant limbs. The 3D kinematics of the lower extremities were obtained using a 10-camera motion capture system operating at 500 Hz. Hip, knee and ankle joint kinematics were quantified in the sagittal, coronal and transverse planes and then contrasted using paired t-tests. Significantly higher ball velocities were obtained with the dominant limb. Foot linear velocity and knee extension velocity at ball contact were also found to be significantly greater in the dominant limb. That reduced ball velocities were observed between kicking limbs highlights the potential performance detriments that may occur when kicking with the non-dominant limb; thus, it is recommended that additional bilateral training be undertaken in order to attenuate this and improve overall kicking performance.  相似文献   

18.
Abstract

Anterior cruciate ligament (ACL) rupture, during ski-landing, is caused by excessive knee joint forces and kinematics, like anterior tibial translation, internal tibial rotation, and valgus rotation. It is not well understood how these forces/kinematics are directly related to ski-landing impact. In the present study, we applied simulated ski-landing impact to knee specimens, and examined joint force/kinematic responses and their correlations with impact force. Ten human cadaveric knees were subjected to axial impact loading at 70° of flexion to simulate ski-landing impact. Impact was repeated with incremental magnitude until ACL failure. Axial impact forces, anterior-posterior and medial-lateral tibial forces were measured using a tri-axial load cell. Anterior-posterior tibial translation, internal-external tibial rotation, and valgus-varus rotation were determined using a motion-capture system. We found positive correlations of axial impact force with anterior tibial force, medial tibial force, anterior tibial translation, internal tibial rotation, and valgus joint rotation. Axial impact forces were more strongly correlated with anterior tibial forces (R 2 = 0.937 ± 0.050), anterior tibial translation (R 2 = 0.916 ± 0.059), and internal tibial rotation (R 2 = 0.831 ± 0.141) than medial tibial force (R 2 = 0.677 ± 0.193) and valgus joint rotation (R 2 = 0.630+0.271). During ski-landing, these joint forces/kinematics can synergistically act to increase ACL injury risk, whereby the failure mechanism would be dominated by anterior tibial forces, anterior tibial translation, and internal tibial rotation.  相似文献   

19.
Magnetic-inertial measurement units (MIMUs) are becoming more prevalent in sports biomechanics and may be a viable tool to evaluate kinematic parameters. This study examined the accuracy of a MIMU to estimate orientation angles under static conditions and dynamically from a squash racket during a forehand drive shot. A MIMU was mounted onto a goniometer and moved through 0–90°, with static data collected at 10° increments during 10 repetitions of all three axes. Typical error analyses showed the MIMU to be very reliable (TE ≤ 0.03°). MIMU accuracy was determined via intraclass correlation coefficients (ICC) (r > 0.999, p < 0.001). An ordinary least products regression showed no proportional bias and minimal fixed bias for all axes. Dynamic accuracy was assessed by comparing MIMU and optical motion capture data of squash racket swing kinematics. A MIMU was fixed onto a racket and 10 participants each hit 10 forehand shots. Mean orientation angle error at ball impact was <0.50° and ICC showed very high correlations (r ≥ 0.988, p < 0.001) for all orientations. Swing phase root mean squared errors were ≤2.20°. These results indicate that a MIMU could be used to accurately and reliably estimate selected racket swing kinematics.  相似文献   

20.
Cardan/Euler and helical angles are the popular methods of quantifying angular kinematics. Cardan angles are sequence dependent and crosstalk can influence the kinematic calculations. The International Society of Biomechanics (ISB) recommends a sagittal, coronal, and then transverse (XYZ) sequence of rotations, although it has been proposed that when calculating rotations outside of the sagittal plane, this may not be the most appropriate method. This study investigated the influence of the helical and six available Cardan sequences on three-dimensional (3D) ankle joint kinematics. Kinematic data were obtained using an eight-camera motion analysis system as participants ran at 4.0 m/s ± 5%. Repeated measures ANOVAs were used to compare kinematic parameters, and intra-class correlations were employed to identify evidence of crosstalk across planes. The results indicate that in the transverse and coronal planes, peak angle and range of motion values using the YXZ and ZXY sequences were significantly greater than the other sequences. Furthermore, utilization of YXZ and ZXY sequences was associated with the strongest correlations from the sagittal plane, and the XYZ sequence was found to be associated with the lowest correlations. It appears that for the representation of 3D ankle joint kinematics, the XYZ sequence is associated with minimal planar crosstalk and as such its use is encouraged.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号