首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 105 毫秒
1.
利用量子化学软件计算得出了烟酸分子的平衡构形,基于这个构形,理论上计算出了烟酸分子的简正振动光谱,并与实验测得的结果进行了比较,最后对其简正振动模式进行了全面归属.  相似文献   

2.
采用B3LYP混合泛函和6-311++G(d,p)基函数组,计算了苯酚分子的平衡构型和振动光谱,并与文献中的实验结果进行了比较.利用简正振动分析方法计算了该分子各振动频率的势能分布,从而对其振动频率做出了全面地归属.  相似文献   

3.
运用Gaussian 98W量子化学程序,采用STO-3G基组,对邻羟基苯甲酸和邻羟基苯甲酸根进行从头计算研究,探讨其稳定性、分子轨道能量、原子电荷布居、分子轨道分布以及分子构象与能量等规律。  相似文献   

4.
经X射线衍射方法测定了对氯苯甲酸的晶体结构。并对其结构进行量子化学从头计算,探讨化合物的稳定性、分子轨道能量、原子净电荷布居规律以及一些前沿分子轨道的组成特征。阐明了对氯苯甲酸分子中两个官能团的相互作用及化学反应性。对构建结构引导性质的教学思想有积极指导作用。  相似文献   

5.
该文主要通过群论方法研究丙二烯分子的振动模式.先对丙二烯振动模式进行分类及构造投影算符,再用投影算符构造简正坐标分量。从而组合出丙二烯分子的15个简正振动模式、  相似文献   

6.
应用原子分子反应静力学方法推导出了MgS基态分子的电子状态和离解极限,采用密度泛函理论(DFT)的B3LYP方法,分别在6-311++G(df,pd)、6-311++G(2df,2pd)、6-311++G(3df,3pd)和cc-PVDZ等基组下,优化出MgS分子的基态稳定结构为单重态的C∞V构型,得出其相应的平衡核间距、基态的简正振动频率和离解能.并运用量子化学从头计算的方法,计算出各阶力常数和光谱数据,得出MgS分子的解析势能函数,该势能函数再现了MgS平衡结构的准确性.  相似文献   

7.
采用分子印迹技术,以苯甲酸为模板分子,1,4-二乙烯基苯为交联剂,分别以α-甲基丙烯酸和丙烯酰胺为功能单体,合成了苯甲酸具有特异性吸附能力的两种分子印迹聚合物,其中用α-甲基丙烯酸合成的分子印迹聚合物对模板分子苯甲酸的氢键作用力和结合能力都比较强。  相似文献   

8.
应用原子分子反应静力学方法推导出了M gS 基态分子的电子状态和离解极限, 采用密度泛函理论( DFT )的B3LYP方法, 分别在6??311 + + G ( d ,f pd)、6??311+ + G( 2d,f 2pd )、6??311+ + G ( 3d ,f 3pd)和cc??PVDZ等基组下, 优化出M gS分子的基态稳定结构为单重态的C V构型, 得出其相应的平衡核 间距、基态的简正振动频率和离解能. 并运用量子化学从头计算的方法, 计算出各阶力常数和光谱数据, 得出M gS 分子的解析势能函数, 该势能函数再 现了M gS 平衡结构的准确性.  相似文献   

9.
采用密度泛函方法B3LYP/6-311G(d,p)计算了5-氨基-2-硝基苯甲酸分子(ANB)的平衡构型以及振动频率,在定义内坐标、对称坐标的基础上计算了振动频率在各力常数上的势能分布百分比,从而完成分子简正频率的归属指认.  相似文献   

10.
采用RHF及DFT(B3LYP)方法,选用不同的基组研究了3,5-二甲氧基苯甲醇(L1OH)的平衡几何构型、拉曼及红外光谱.计算结果表明,采用不同方法、不同基组优化得到的几何结构基本一致.采用HF方法计算得到的频率值比用B3LYP得到的高10%左右;采用B3LYP方法选用不同基组计算的结果峰位没有明显变化,只是强度略有差异.根据B3LYP/6-311G(d,p)计算的结果,采用简正振动分析方法得到了各振动频率的势能分布,从而对L1OH分子的振动频率归属做出了全面指认.  相似文献   

11.
1IntroductionTheclassicalthinplatetheoryofvibrationisbasedontheKirchhofhyothesis,andtheefectoftransversalsheardeformationandr...  相似文献   

12.
通过对实船轴系可测试轴段进行横向自由振动模态测试,得到其固有频率及振型。并在有限元软件ANSYS中进行仿真,利用测试得到的固有频率及振型来确定轴系的边界参数,即轴系支撑刚度,得到一个正确的仿真模型。之后,根据振动模态分析原理进行中间轴承的位置优化。在一定螺旋桨激励力下,可将中间轴轴承振动位移减小一个数量级。  相似文献   

13.
Correct extraction of the ultra-large-scale integrated (ULSI) interconnect components at hight frequencies is very important for evaluating electrical performances of high-speed ULSI circuits. In this paper, the extraction of the interconnect resistance at high frequencies is derived from the Ohm‘s law and verified by the software FastHenry. The results are also compared with those of another resistance formula originated from the effective area of the current flowing. The applicability of these two formulae is discussed. The influence of the interconnect geometry on the resistance at high frequencies is studied. The computation indicates that the effect of frequency on the resistance is weak when the skin depth is larger than half of the short side of the rectangular interconnect cross section. With further increase of frequency, the resistance increases obviously. Results imply that conductor with a square cross section exhibits the largest resistance for rectangular conductors of constant cross section area.  相似文献   

14.
提出一种四辊轧机工作机座垂直振动的二自由度集中质量模型,使用Matlab软件计算了动力学模型的等效质量和等效刚度参数以及系统的无阻尼振动固有频率。通过轧制过程现场振动测试信号的分析,验证了所建模型的正确性。  相似文献   

15.
According to the blasting construction of the diaphragm wall of Puxi approaching section of East Fuxing Road river-crossing tunnel,the monitoring project of the vibration of the existing tunnel induced by the blasting construction is put forward,which includes the sensors' location,monitor method and the vibration monitoring system.Based on the monitoring data of the explosion vibration,the vibration wave forms,velocities,acceleration responses,main frequencies and fields of measure points are analyzed under the conditions of three locations and different charge quantities.According to the safety-judging standard of explosion vibration,the conclusion that the existing tunnel is safe under the explosion vibration is then drawn.Furthermore,the spectrum characteristics of three explosion vibrations and the spectrum changing properties of explosion vibration wave transmitting in different directions are concluded,which can provide reference to similar projects.  相似文献   

16.
基于非局部理论,建立了受初始拉力的纳米梁的横向自由振动的力学模型。考虑了非局部效应对于固有频率和振动模态的影响,并以两端简支纳米梁为例,运用分离变量法和多尺度分析法考察了梁的线性振动特征。分别讨论了振动模态与无量纲化轴坐标,以及固有频率与非局部参量的关系。两种方法求得结果非常接近,这证明了新建纳米梁横向振动模型的有效性。  相似文献   

17.
用多尺度方法对-土-平台系统进行了摄动分析,发现此系统存在多种组合共振现象,其固有振动频率与模型平台实测结果一致.在主参数共振条件下,文章讨论了在不同振动类型(自激,锁定,强迫)下的非线性动力学特性,这与现场观察到的冰激平台共振现象一致,本文还解释了冰激振动的机理,为海洋平台系统的非线性分析建立了一个合理的力学模型.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号