首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
The influence of chemical treatments based on novel organic products on the consolidation of deteriorated wood by insect attack was evaluated on two hardwoods and one softwood: fir (Abies alba), beech (Fagus sylvatica) and deciduous oak (Quercus sp.). Degraded and intact specimens of the three wood species were impregnated with two different chemical treatments aimed to verify the potential synergic action of the novel products on wood. Then, the specimens were subjected to bending, compression parallel to the grain, impact, hardness and water absorption tests. Untreated specimens of the same botanical species, both degraded and non-degraded, were examined for comparison purposes. The experimental results showed a different effectiveness of the proposed chemical treatments to improve the mechanical and absorption properties of degraded wood. The most effective treatment was the one assuming the concurrent use of the studied novel consolidants. The species more susceptible of the enhancement in mechanical properties were fir and beech. The observed differentiations were most likely caused by the different structure of the botanical species considered, leading to a consequent different product penetration in the wood structure. The dimensional stability in terms of water repellent and antiswelling efficiency, after a three-month immersion in deionized water, was found to improve in all the treated wood specimens. Overall, experimental results showed that the impact of the chemical treatments was higher on degraded samples than on intact ones.  相似文献   

2.
This study is aimed at an assessment of the properties of two polymeric products applied to Norway spruce (Picea abies) and White poplar (Populus alba) wood species. It contributes to ongoing research experiments on the consolidating properties of two synthetic resins and their potential synergic action on wood, resulting from their different interaction with the substrate: Paraloid B72 and Regalrez 1126. Experiments were carried out on a series of samples of the two wood varieties. The consolidants were applied alone and one after the other, with one coat of Regalrez and then one of Paraloid. Porosity and variations in pore size distribution were ascertained by mercury intrusion porosimetry (MIP). Colorimetric and IR spectroscopic measurements were also taken before and after aging by solar radiation and freeze/thaw cycles, to verify the possible slowing of photodegradation of the treated wood and the consolidating resistance. Results confirm that both products penetrate the wood with a different behaviour. After double treatment with Regalrez + Paraloid, a significant advantage was observed in terms of mechanical resistance and pore size distribution, although no advantages as regards resistance to photo-oxidizing processes or colour changes were observed.  相似文献   

3.
The mosaics covering the floors of the rooms of the domus dei Coiedii at Suasa (Ancona, Italy) may be dated archaeologically and artistically between the late republican-Augustan age (end of the first century B.C.-beginning of first century A.D.) and the second century A.D.-first half of third century A.D. The floors were made mostly in opus tessellatum, only one in opus sectile. Tesserae used in opus tessellatum are made mainly of local stones, belonging to the so-called Umbro-Marchigiana Sedimentary Sequence: the white to pinkish and reddish tesserae consist prevalently of limestones belonging to the ‘Scaglia Rosata’ Formation (Late Turonian-Middle Eocene), and subordinately to the ‘Calcare Massiccio del Burano’, which is part of the ‘Calcare Massiccio s.l.’ Formation (Late Triassic-Early Lias). Most dark to black tesserae are composed of not fossiliferous marls and marly clays, which probably derive from the local ‘Marne a Fucoidi’ Formation; a number of them are made of very fine grained sandstones, which are found as pebbles in the alluvial sediments of the Cesano river close to Suasa, and, some, of aphyric leucite-bearing basanites from the potassic Quaternary magmatic province of central-southern Italy. Artificial glasses (red and green, rich in Pb and low in Sb; light blue, low in Pb and high in Sb), containing microliths of Pb-rich phase(s) and of wollastonite, were also used in some floors. The stones used in opus sectile are (1) sedimentary: nodular limestones belonging to the ‘Rosso Ammonitico’, which occurs in the Umbro-Marchigiana Sedimentary Succession; black marls and marly clays similar to those used in opus tessellatum; onyx marble; (2) magmatic: porphyrites (‘porfido verde antico’) and gabbros (ophite); (3) marbles: different kinds of coloured marbles, comprising ‘marmo cipollino’, ‘rosso antico’, ‘pavonazzetto’, ‘portasanta’, ‘giallo antico’, ‘bigio antico’, ‘brecce coralline’. White marbles from Marmara and Carrara were also employed.  相似文献   

4.
In this paper, we have performed a systematic characterization of sol and gel properties for particle-modified silica consolidants filled with titania (TiO2-PMC), alumina (Al2O3-PMC), and silica (SiO2-PMC) particles. Viscosity of the sol is not increased much by loading with particles, especially for TiO2-PMC and SiO2-PMC. Composites show a strong reduction of silicate network shrinkage. Also, the incorporation of oxide particles into the matrix increases the elastic modulus while decreasing the thermal expansion. In agreement with the improvement of bulk gel properties, we observed better performance of PMCs against unfilled silicate upon consolidation of Ohio Massilian sandstone. Notably, the sulfate crystallization test has less effect on PMC-treated than on silica-treated samples.  相似文献   

5.
For conservation of the built cultural heritage, the application of conservation products like consolidants or water repellents is often suggested. Their impregnation depth is a key factor for the assessment of the treatment efficiency. It will vary depending on the internal structure of the stone material and the properties of the conservation products. In this study a porous bioclastic limestone from Maastricht (the Netherlands) and a porous sandstone of Bray (Belgium) were selected for treatment with either ethylsilicate-based consolidant products or siloxane-based water repellents. We explore the potential of neutron radiography to visualize the conservation products after polymerization, since previous experiments already proved their detectability before polymerization. Additionally, water absorption by capillarity was monitored inside the samples. The experiments in this study illustrate that the ethylsilicate-based consolidants remained visible for neutrons even after the polymerization process, while the siloxane-based water repellents can only clearly be distinguished in the stone as long as they contain a certain amount of solvent. The study proves that neutron radiography can provide important additional information for the research in the built cultural heritage domain, especially as it allows to successfully visualize the impregnation depth of silicate-based consolidants inside natural building stones.  相似文献   

6.
Maintaining the microclimatic parameters at the desired value is essential for artefacts preservation. In order to control the status of the microclimatic parameters, a continuous monitoring of the indoor environmental provides conservators, curators, restorers, and lenders with an exact knowledge of the microclimatic conditions under which the works of art are kept. Moreover, the monitoring results give important information in order to make adequate changes to the control strategy of microclimatic parameters. From this point of view, monitoring is an essential tool to develop an actual preventive control programme aimed at maintaining the optimal microclimatic conditions for preservation. As a consequence, long-term monitoring has to be applied to prevent deterioration of works of art. The widespread opinion that a correct approach to the topic of microclimate control for artefacts preservation is not only and necessarily to provide buildings with sophisticated environmental control systems, but mainly to investigate the actual environmental dynamics and, before any structural intervention, to define the compatibility between the climate control potentials and the preservation requirements, has become more and more firm among the experts. Monitoring also allows to verify the capacity of the “building and Heating, Ventilation and Air Conditioning (HVAC)” system to maintain the desired thermo-hygrometric values within the operating conditions. To this aim, the Italian Standard UNI 10829 (1999) defining monitoring, elaboration and analysis of the microclimatic data as supporting actions for artefacts preservation, led to the need of a long-term monitoring and of a statistical approach to the data management. The approach proposed by the Italian Standard has been recently adopted by a European Standard (EN 15251, 2007). In accordance with the Standards mentioned above, in this paper an operational procedure to assess the thermo-hygrometric quality in museums is firstly synthetically presented and than applied to a case study. In particular, the procedure is developed in order to define the thermo-hygrometric quality level of the exhibition areas in the large museum complex of “Santa Maria della Scala” in Siena (Italy) during the international temporary exhibition “Duccio. La nascita della pittura senese” (“Duccio. The birth of Sienese Painting”).  相似文献   

7.
The recent development of a new drilling machine in the framework of the EU project HARDROCK brought some interesting perspectives for the characterisation of decay profiles, for tracing old consolidating treatments and for evaluating new consolidants. The equipment executes a drill hole, typically 5 mm in diameter, down to 5 cm, under precisely defined and controlled drilling conditions. The output is a graph of force versus depth. The instrument can be transported and operated in situ. The operator defines the drilling rotation speed and the advancing rate and the instrument registers the force required for executing the hole under those strictly defined conditions. This paper presents some data taken from a laboratory study on consolidants which demonstrate that the equipment has a very high discriminating power for detecting the presence of consolidants. Clear differences among some typical consolidants were detected, both in the strength increase and in the penetration depth. They also show that the average drilling forces present a fairly good correlation with bending strength, in spite of the fact that full consolidation of the tested specimens was not possible with all consolidants. The in situ study of Porta Especiosa has shown that the instrument was able to identify the presence of decay events at several depths, in a way that no other known method can do. The identification of the presence of old treatments was demonstrated with total guarantee.  相似文献   

8.
The microclimatic analysis of the Petrarca's tomb in Arquà Petrarca, Padua (Italy) was performed to assess the suitability of a closed environment located outdoors respect to the conservation requirements of heritage materials. Results showed that the thermo-hygrometric conditions inside the tomb were not suitable for the conservation of organic materials, like bones and wood. The orientation (north or south) was the main responsible for the different damage features of the two sides of the wooden case housing the human remains inside the tomb. Technical solutions were finally implemented to improve the conservation conditions, thus avoiding further damage.  相似文献   

9.
This research focuses on the characterization of historical mortars collected from a covered dockyard, called tezone 105, erected in the Arsenal of Venice during the XVI century. The mortars date back to different building phases. A stratigraphical analysis of tezone 105 has proposed a chronology of building interventions. The building phases recognized by the stratigraphical analysis belong to the original structure (XVI century) and to later interventions from XVI to XX century. Mortar samples are investigated by granulometric analysis, infrared spectroscopy (FT-IR), simultaneous thermal analysis (DSC/TG) and X-ray diffraction analysis (XRD) in order to identify the technology peculiar of each building phase. Mortar sampling was carried out on indoor masonry and foundation. Masonry mortars appeared to be characterized by the application of air-hardening binders, whereas foundation mortars were characterized by hydraulic binders.  相似文献   

10.
Acetic and formic acid vapors emitted from woodwork in historical organs are very important corrosive agents for lead pipes. These acids are slowly released from the wood both during playing and when the pipes are silent. To inhibit this emission process, the wood surface can be modified, by creating a protective layer with alkaline features. However, a coating of wood is not recommended since this could modify the appearance and create a layer not perfectly compatible with the substrate. For this reason, we propose to use some innovative nanotechnology that has been successfully applied for the deacidification of wood samples coming from the Vasa shipwreck. Application of calcium (or magnesium) hydroxide nanoparticles, with sizes ranging from 30–150 nm, allowed a homogeneous distribution of particles through the surface layer of wood simply by soaking (or spraying) it in a alcoholic (or mixed with less polar solvents) dispersion of nanoparticles. Nanoparticles do not modify the wood appearance and distribute randomly within the first layers of wood. The small size of particles accounts for the high reactivity with CO2 from the air, to give the alkaline reserve of carbonates that provide high efficacy in the neutralization of gaseous acids. The emission of volatile organic compounds (VOC) from the treated wood was determined by using an emission test cell, Field and Laboratory Emission Cell (FLEC). The results show that the emissions of acetic acid vapor from nanoparticles treated wood was very low (< 70 μg/m2 h) during the first 13 month. In contrast, untreated wood emitted high concentrations of acetic acid vapor (200–400 μg/m2 h).  相似文献   

11.
During the excavation of the Etruscan and Roman harbour of Pisa, several shipwrecks were found. The wooden timbers constituting the ship C and ship F (which date back to the first and the second century A.D., respectively, as attested by archaeological findings) were selected in order to collect information about the technological knowledge of the time. Pinus pinaster Aiton was essentially utilised for the planking of ship C and Quercus sp. caducifolia for that of ship F. The choice of timber for the other parts of ship C hull was much more differentiated. Ship C seems to be built in a careful way and its characteristics when added to its overall lightness, seem to reflect its use as a higher capacity boat built for sea sailing. Ship F seems more linked to short voyages in inner fresh waters. The utilisation of different woods was linked not only to the technological characteristics of wood, but also to their easy availability. Palynological analysis, carried out on the clay sediments embedding the shipwrecks, has shown that the flora of Pisa area in that time period would have allowed the acquisition of all the timber species used for both the ships’ construction, with the exception of the fig wood. However, a foreign origin of the timber from somewhere else in the Northern Mediterranean area has not been excluded.  相似文献   

12.
Stained glass windows belong to the most precious pieces of art in many European countries. Examples of heavily endangered paint on glass are reported in the literature and mainly related to condensation effects and air pollution, as stained glass windows preferably remain in their original architectural surrounding. Several surface coatings and paint treatments have been proposed to consolidate and protect degraded paint. Very often, the selection of the materials is based more on practical aspects than on scientific research. This study concerns the comparison of some traditional, modern and newly developed consolidants for the preservation of historic glass paintings. Experiments have been carried out with model painted glass samples simulating weathering phenomena of originals. Traditional materials like Paraloid B72, modern ones like SZA (proposed by the Fraunhofer-Institut für Silicatforschung, ISC), and three new consolidants prepared by the sol–gel method and based on different hybrid organic–inorganic alkyl-alkoxysilane systems have been considered. The adhesion, penetration, stability, hydrophobicity, mechanical and chemical resistance are properties and requirements tested to prove their effectiveness and range of use. The three new materials developed in this study for the consolidation of paint on glass have the potential to offer alternatives to existing materials. Nevertheless, further research is necessary before their application in restoration workshops can be recommended. A strategic approach is requested to avoid risks for these valuable historical originals and to contribute to the long-term preservation of the paint on stained glass windows in their original sites.  相似文献   

13.
Abstract

The essay approaches recent discussions of ‘life’ and biopolitics from the historical context of early 20th century German vitalist thought. By closely analysing the concept of the ‘drive’ in art historian Wilhelm Worringer's Abstraction and Empathy (1908) and Sigmund Freud's Beyond the Pleasure Principle (1920), the essay shows how the paradoxes of those texts prefigure and contribute to the contemporary problematic of ‘life’ in theoretical discourse across the humanities. In Worringer and Freud, the drive is an ‘elastic’ concept stretching beyond – and yet constitutive of – the epistemological object (‘life’) that it is called upon to describe. The distortion of the drive in each author's thought – from an impulse of organic vitality to a principle of inorganic primordiality – manifests the contradictory ‘life’ of vitalist concepts themselves in their elastic potential for transformation, regression and contradiction.  相似文献   

14.
Waterlogged wood samples of Ulmus sp. and Fraxinus sp. from the ancient harbor of Otranto in Southern Italy were radiocarbon dated by accelerator mass spectrometry (AMS) and examined for physical and chemical changes to assess the degree of degradation. The analyzed woods were dated to the 2nd half of the twelfth – 1st half of the thirteenth centuries AD. The results of all the used methods (maximum water content, basic density, shrinkage, XRD analysis and holocellulose content) indicated a low level of degradation in the inner part of the wooden find. The outer and middle part, on the other hand, showed a greater degradation level. An important result is the identification of a not homogeneous degradation in the different parts of the examined wooden block, which will affect the design of the consolidating treatment.  相似文献   

15.
The “marble” Portasanta from Caldana (Grosseto, Italy) takes its name from the strict resemblance to the ancient Marmor Chium (also this called Portasanta) coming from the island of Chios in Greece. In this work, a complete characterization of the Italian Portasanta was made: chemical (X-ray fluorescence and isotopic analyses), mineralogical (X-ray diffraction on the bulk sample and on insoluble residue after acid attack), physical (water accessible porosity and imbibition coefficients), petrographical (optical microscopy) and mechanical (compressive strength test) analyses have been carried out in order to obtain a better distinction between Italian and Greek “marble”, sometimes mistaken. The Portasanta from Caldana (Italy) was quarried surely in the sixteenth century, but a possible use of this material during Roman time is still in doubt. The study of samples from some Tuscan archaeological sites (Torraccia di Chiusi, Siena and Roselle, Grosseto) allows us to confirm the use of Portasanta from Chios for the Torraccia site and that of Caldana for Roselle.  相似文献   

16.
This article demonstrates the importance of treatment application procedures on the consolidation effectiveness obtained by comparison of the results obtained using three different consolidants on four carbonate stone types, and proposes a general methodology for assessing the potential effectiveness of consolidants in laboratory conditions. It stresses the relevance of taking into account the treatment methodology, given the influence application protocols can have on the overall behaviour of the consolidated material. Several mechanical properties were assessed to demonstrate this influence on the performance of the consolidant. The results demonstrate that the strengthening action achieved with a specific product can only be defined in a strict relation to the treatment protocol used to produce it. The results also contribute towards the definition of standard testing protocols on stone consolidation. The application of a consolidant by direct contact capillary absorption is a reliable procedure and the results are easier to interpret than others obtained by brushing or by full immersion, thus making this procedure a good candidate for an eventual standard laboratory assessment method of the consolidation action of any specific stone/consolidant combination. This study also showed that the best test method to assess the strengthening action of stone consolidants in soft stones is DRMS (Drilling Resistance Measuring System). Moreover, the collection of longitudinal ultrasound velocity profiles determined in stones specimens treated by contact capillary absorption was shown to be a useful non-destructive method to assess the depth of the strengthening action achieved.  相似文献   

17.
Since 2004 an international research group of Wood Technologists has been given by the Louvre Museum the task of analysing the hygro-mechanical state of the Poplar (Populus alba L.) panel on which Leonardo da Vinci painted his “Mona Lisa”, namely verifying the appropriateness of the thermo-hygrometric conditions in its exhibiting showcase, where the microclimate is actively controlled, and assessing the potential consequences of any hypothetical fluctuation. In order to acquire data about the mechanical behaviour of the panel, and to feed and calibrate appropriate simulation models, the team has not only set up a continuous monitoring by means of automatic equipment, but has also performed manual measurements on the occasion of the annual openings of the showcase where the masterpiece is conserved and exhibited. This paper reports about techniques used for estimating the forces acting between the wooden panel and its frame (the châssis-cadre), and their location, such data being of primary importance for evaluating the panel's internal stresses. The contact forces have been calculated on the basis of the local contact pressures, imprinted on a pressure-sensitive foil as a range of saturation values of the colour developed in the contact areas. The forces calculated as above have also been compared with the contact forces between the panel's back face and the crossbeams pressing it against the châssis-cadre, which have been measured by means of a load cell. As could be expected, the results from so different techniques do not strictly coincide; however the agreement is fairly good.  相似文献   

18.
Optical and SEM-EDS microscopy, X-ray powder diffraction and micro FT-IR spectroscopy investigations of the funerary klinai (couches) of Tomb 1 from Amphipolis and a stone sarcophagus from ancient Tragilos—two painted monuments made by Macedonian craftsmen of the Early Hellenistic period—identified the original materials and painting technique, as well as synthetic materials used as consolidants during past restoration treatments. The original organic binders and the superficial modern coatings have been identified by micro FT-IR spectroscopy applied directly to the sampled powders or tiny fragments and to their solvent—soluble fractions. The pigments identified on the couch of Amphipolis are: red and yellow ochre, cinnabar, Madder lake, paratacamite and antlerite, carbon black, calcium carbonate, kaolin and gypsum. The identification of egg and animal glue confirms the application of tempera and secco techniques. The detection of polymers such as polydimethylsiloxane, polyvinyl acetate and alkyd resins, is related to modern restoration products. The pigments attested on the paintings of the Tragilos' sarcophagus are: red and yellow ochre, Egyptian blue, malachite, carbon black, calcium carbonate and gypsum. The absence of organic binders combined with the constant presence of calcium carbonate in all the examined samples suggests the use of lime as the binding medium in the painted decoration of the sarcophagus. The presence of Paraloid B72 is related to recent conservation treatments.  相似文献   

19.
When timber elements in heritage buildings are moderately degraded by fungi and assuming underlying moisture problems have been solved, two actions can be taken: i) use a biocide to stop fungal activity; ii) consolidate the degraded elements so that the timber keeps on fulfilling its structural and decorative functions. The aim of this work is to investigate the mechanical performance of maritime pine wood degraded by fungi after being treated with a biocide followed by impregnation with a polymer product. Three commercially available products were used: a boron water-based biocide, an acrylic consolidant and an epoxy-based consolidant. Treated and consolidated specimens were subjected to mechanical tests: axial compression test (NP 618), static surface hardness (ISO 3350) and bending test (NP 619). Sets of replicates were subjected to an evaporation ageing test (EN 73) after application of the products and also tested for mechanical behaviour. An increase in mechanical strength was observed for both consolidants with no significant influence from the previous use of biocide product. The specimens subjected to ageing showed a slightly better general mechanical performance.  相似文献   

20.
Within the multidisciplinary study concerning one of the covered dockyards (called tezone 105) erected in the Arsenal of Venice, carried out by the ‘Target Venezia’ CNR Project, it will be presented here a preliminary work concerning the survey of decay1. This analysis is strictly connected with the other works carried out by the Operative Units of the ‘Target Venezia’, especially with the stratigraphical survey2 and the chemical and microstructural characterisation of mortars3 and bricks4. First, the survey of decay has been based on the stratigraphical investigations of the tezone structure, which has allowed the classification of the different building phases over a long period (from the XVI until the first half of the XX century). Second, a computer aided methodology has been applied in order to make the research easier and to allow multiple queries either to know which kind of decay are present in every point of the surfaces and the global extension of each typology of degradation5.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号