首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 28 毫秒
1.
The application of total reflection X-ray fluorescence (TXRF) to the analysis of inorganic pigments used in five Albanian icons painted by Onufri Qiprioti, in the period from the end of 16th to the beginning of 17th century is presented. After removing the protective varnish with a solvent, a dry cotton-wool bud (Q-tip) was rubbed over the painted surface to collect the micro-samples. Samples, covering the main colors and their hues, were collected of each icon. A part of the small amount of the sample was transferred to a glass carrier and analyzed by TXRF. Main types of inorganic pigments used for different colors could be identified. The results indicate a palette which included white lead, calcium white, gold, orpiment, yellow and red ochre, vermilion, red lead; a cooper based green pigment (malachite or verdigris) and smalt.  相似文献   

2.
Optical and SEM-EDS microscopy, X-ray powder diffraction and micro FT-IR spectroscopy investigations of the funerary klinai (couches) of Tomb 1 from Amphipolis and a stone sarcophagus from ancient Tragilos—two painted monuments made by Macedonian craftsmen of the Early Hellenistic period—identified the original materials and painting technique, as well as synthetic materials used as consolidants during past restoration treatments. The original organic binders and the superficial modern coatings have been identified by micro FT-IR spectroscopy applied directly to the sampled powders or tiny fragments and to their solvent—soluble fractions. The pigments identified on the couch of Amphipolis are: red and yellow ochre, cinnabar, Madder lake, paratacamite and antlerite, carbon black, calcium carbonate, kaolin and gypsum. The identification of egg and animal glue confirms the application of tempera and secco techniques. The detection of polymers such as polydimethylsiloxane, polyvinyl acetate and alkyd resins, is related to modern restoration products. The pigments attested on the paintings of the Tragilos' sarcophagus are: red and yellow ochre, Egyptian blue, malachite, carbon black, calcium carbonate and gypsum. The absence of organic binders combined with the constant presence of calcium carbonate in all the examined samples suggests the use of lime as the binding medium in the painted decoration of the sarcophagus. The presence of Paraloid B72 is related to recent conservation treatments.  相似文献   

3.
Several authors or practitioners have remarked that Q-switched lasers have an immediate blackening effect on mineral pigments such as vermilion (HgS), minium (Pb3O4), white lead [2PbCO3. Pb(OH)2], malachite [Cu2CO3.(OH)2] and yellow ochre (FeOH2). A similar blackening effect can also be obtained on veined Carrara marble. This stone contains several trace elements, particularly iron and manganese. The latter is responsible for a particular response in electronic paramagnetic resonance spectroscopy (EPRS). We investigated the effect of a Q-switched Nd:YAG laser irradiation on the EPRS trace of Carrara marble. Further experiments were performed with the same analytical tool on synthetic calcite powders that had been doped with iron or manganese. It appeared that no significant change of EPRS trace could be put into evidence after laser irradiation of both bulk Carrara marble or doped calcite powders, although some samples had actually blackened. It is concluded that the blackening effect is not due to an oxidation of manganese ions. Colour measurements were also performed within the framework of this investigation. They showed that the colour shift to black is proportional to the fluence applied to the stone surface  相似文献   

4.
The focus of this work is the wood polychrome model of the church of S. Maria della Consolazione in Todi, an artefact whose author and historical events are not completely known except a general reference to the construction period of the church (1508–1607 AD). In this study, original and additional materials were examined in order to provide a deeper understanding of the painting and assembly techniques, and a greater awareness of how well preserved the object is, as well as an analysis of previous preservation and conservation interventions. The samples from the painted surfaces were examined by means of micro-Raman spectroscopy, fourier transform infrared (FTIR) spectrometry and internal microstratigraphic analysis. Thin sections of the wood samples were examined under an optical transmission light microscope in order to identify the botanical species. The results shown in this paper suggest the possibility that the original painted layers are made of calcium carbonate white, red ochre and indigo and they were applied by protein binder without any ground layer. Some non-original pigments were found on the model surface like Prussian blue and chrome yellow. Concerning wood components, poplar was characterized both in the original and non-original parts of the model whereas pine species were detected only in the restoration elements.  相似文献   

5.
The pigments, organic materials and techniques used on a post-Byzantine icon of St Nicholas were determined by means of several micro-analytical techniques. The icon painter covered the leather support with silver leaf about 3 μm thick to create a smooth working surface. Animal glue was used to secure the leaf to the leather, and FTIR spectroscopy has identified another layer, 30–60 μm thick, of the same material applied as a primer above the silver. Above that, a layer of lead white covering the entire surface creates a white substratum serving the same purpose as the gesso on a wood panel. The colour palette, determined by means of scanning electron microscopy and FTIR spectroscopy, is very simple. Only seven colours were identified: lead white, caput mortuum, red and yellow ochre, cinnabar, carbon black and smalt. As far as we know, this is the first time that smalt has been found on a Byzantine icon. Since smalt was chemically synthesised only after 1500 AD, it may be concluded that this icon was painted after the end of the 15th century. Beeswax was used as a protective varnish.  相似文献   

6.
The state of conservation of the frescoes at Qusayr Amra was investigated by integrated physico-chemical measurements, particularly optical and scanning electron microscopy, μ-infrared spectroscopy, mass spectrometry and X-ray powder diffraction.The frescoes appear darkened and severely damaged owing to the deterioration of surface treatments and to the widespread presence of different salts. These caused significant detachments of the painting layers.The materials used in the painting and preparation layers and in the wall plaster were characterized in order to clarify the painting technique. Different pigments have been identified on the pictorial layers: the original ones correspond to green earth, yellow and red ochre, realgar, bone black and lapis lazuli and others, such as titanium white and cobalt blue, ascribed to recent restoration works. Proteinaceous materials (egg or yolk) have been identified as binders for the pigments, indicating a tempera painting technique.Three different products, belonging to restoration interventions, have been also identified: the natural product shellac, ascribable to next-to-last restoration and scarcely removed during last restoration also because of its insolubility, the synthetic vinyl acetate and acrylic polymers. Particularly the latter one indicates an on-going degradation of the applied fixatives.The extensive deterioration of the surfaces is also due to the widespread presence of salts, such as chloride, nitrate and sulphate clearly identified by XRD measurements.The obtained results give a comprehensive overview on the employed painting technique and its state of preservation and on the causes of the painting deterioration. Therefore, they are a fundamental tool to develop durable and compatible materials and methodologies for a future conservation strategy of this site.  相似文献   

7.
Optical microscopy, cross-section and fragment Micro-FTIR spectroscopic techniques along with microchemical tests were used for the identification of pigments in two different samples of an icon. Representing the Last Judgement, and painted by the Greek master Ioannis from the village of Kapesovo in the year 1771, the kneeling desk icon under investigation is a noteworthy contribution to the study of materials in post-Byzantine visual arts. The main components found in the ground layer of both samples were gypsum, beeswax and a proteinaceous material. Cinnabar, Prussian blue and cerussite were identified on the paint layers. The binding medium on the paint layers was weddelite. The materials used in the painting and ground layers were characterized in order to clarify the painting technique. Proteinaceous materials have been identified as binders for the pigments, indicating a tempera painting technique.  相似文献   

8.
Giovanni Fattori (Livorno 1825–Firenze 1908) is the most representative artist of the Macchiaioli's current, an early group of Italian plein-air artists, whose work anticipates, in the xixth century, that of their younger contemporaries, the French Impressionists. The study, performed by a multidisciplinary team made up of scientists and conservators, presents the results of the scientific characterization carried out on a group of 10 paintings made by Fattori between 1854 and 1893 and shows the way he used complex mixtures of a large variety of traditional and synthetic pigments, ranging from lead white, found pure and also extended with calcium carbonate, natural barite and gypsum to zinc white, from red ochre to cinnabar and vermilion, from yellow ochre and Naples yellow to chrome yellow, cadmium yellow and zinc yellow, combined with many other ones reported in details. This paper highlights the evolution of his painting technique during a time of great technological and social innovations and puts forward some hypothesis on his awareness about manufactured pigments, i.e. tube paints recently introduced into the artists’ circles. The wide range of pigments and their different quality among the same synthetic products suggest that the artist used all the available materials, and that picking out the pigments he retained the early xixth century artists techniques, such as the use of mineral earths and Prussian blue, similarly to his contemporary Italian artists Federico Zandomeneghi and Telemaco Signorini, but he also experimented new and peculiar pigment mixtures in the making of “colored darks” and an innovative use of the grounds in the final composition, that are also distinctive features of the French Impressionists. This work is aimed at contributing to overcome the lack of a comprehensive overview on the widespread historical and scientific data collected up to now on the Italian paintings in the xixth century, which has been severely underestimated with respect to previous art movements.  相似文献   

9.
The possibility to use laser radiation to clean historical objects has been established for several years. A complex case and widely met problem are polychromes. They react (chemically as also physically) very sensitively towards laser radiation. In this study, the reaction of pigments was investigated in dependency on the incident wavelength (Nd:YAG, λ = 1064, 532, 355, 266 nm) and energy density. The chemical and also the physical interactions were investigated. In this work, the following analytical methods were utilised: differential thermal analysis (DTA), colour measurements (CIE-L*a*b*), X-ray diffraction (XRD) and energy dispersive X-ray analysis (EDX). It turned out that the colour change of the pigments can have different origins: they can for instance be induced by laser induced oxidation, reduction or phase changing. Most of the pigments show reactions at very low energy densities (H < 100 mJ cm–2). Overall the fundamental wavelength of the Nd:YAG-laser (λ = 1064 nm) proved to be most suitable, whereas λ = 355 nm shows most influence on the colour change.  相似文献   

10.
  相似文献   

11.
The removal of a brass-based paint (purpurin) used in painting gilded wood to cover losses of gold leaf, represents today a difficult task to conservators, who may have to resort to toxic chemical solvents in order to clean the painted surface. This action, due to its nature, is unsuitable for both the conservator and the artwork itself. In this study, a Q-switched Nd:YAG laser system outputting 1 064 nm (infrared), 532 nm (visible, green) and 266 nm (ultra-violet) radiation was used to study the interaction of these wavelengths in a gilded sample surface painted with purpurin. All tested wavelengths interacted differently with the tested surface and, also, the several layers that form the gilded surface (purpurin, varnish and gold) showed different interactions to each wavelength. The ultra-violet radiation (266 nm), in a multi-pulse mode at low fluences, was found to be the most efficient wavelength in cleaning the painted gilded surface.  相似文献   

12.
The painting “Madonna with Child”, attributed to Pietro Lorenzetti (14th century) and reworked around the middle of the 16th century, was studied by several techniques in order to characterize the materials used in the original and in the repainted areas. FORS, light microscopy, ESEM-EDX, ToF-SIMS and GC-MS were used. Red ochre and raw sienna earth were identified by FORS in the original parts of the painting. On the repainted parts of the panel, cinnabar, ultramarine blue and lead white were found. By means of GC-MS and ToF-SIMS measurements it was possible to identify the organic binding media used in the preparatory and painted layers.  相似文献   

13.
This essay describes the ways that an indigenous aesthetics of the new informs emerging forms of digitally-driven creativity in Aboriginal north Australia. Central is the media art project Christmas Birrimbirr (Christmas Spirit), which began as an ethnographic experiment with digital media and ritual aesthetics. Taken up by Yolngu collaborators as something new and exciting, the project explores uses of video art and more supposedly traditional media to produce ritual in a gallery setting. The imagistic dynamics of the project gave rise to dream visions and ritual innovation resulting in the production of a Christmas unlike anything previously seen in Arnhem Land, or for that matter, anywhere else. The aim of thinking through the idea of newness itself is to get closer to a sense of what the project leader, Paul Gurrumuruwuy, means when he says about our media work: ‘When you make gamununggu (ochre painted sacred design) yuta (new), you make it talk’.  相似文献   

14.
A group of 51 shards of medieval polychrome glazed pottery, coming from Canosa castle archaeological site (Bari, Italy), has been investigated through surface analytical techniques, such as Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDS) and elemental ones, such as Inductively Coupled Plasma–Optical Emission Spectroscopy (ICP–OES) and Absorption Atomic Spectroscopy (AAS) by flame and electro-thermal atomisation. The investigation was aimed at defining the elemental composition of pottery findings, identifying pigments and clarifying glaze types. The results of the analytical characterization allowed the identification of materials and technological expedients used for pottery manufacturing, highlighting original features in the production of the investigated pottery.The quantitative analysis performed on ceramic paste, glaze and painted decorations provided a significant number of results, thus enabling their effective exploitation for multivariate statistical techniques, in order to find out possible groups of pottery items with defined similarity within the samples.  相似文献   

15.
The paper presents our results concerning a complex investigation by reflectance spectroscopy (RS) and Electron Paramagnetic Resonance (EPR) of the defects induced by gamma irradiation in 22 different historical pigments. Gamma irradiation is used to destroy microflora and insects which are involved in biodeterioration processes of art works such as paintings. At the same time, it can induce defects i.e. color centers which are likely to modify the original painting colors by altering the embedded pigments. Accordingly, RS was used to quantify, by means of CIELAB color space, the contribution of irradiation defects to the pigments color changes, while EPR spectroscopy, in view of paramagnetic properties of color centers, was used to confirm their presence after irradiation. Our investigations showed that, excepting marble dust whose color alteration was still observable after 3 months, color changes induced by irradiation in all other pigments disappeared after about 30–40 days. In addition, RS as well as EPR measurements suggest that color changes are related to irradiation color centers, this finding being confirmed by the coincidence, within experimental uncertainties, of the half-life time color changes as obtained by these methods.  相似文献   

16.
In the present work, an analytical characterization of painted plaster samples coming from ancient buildings dated back to 2nd cent. B.C., located in Licata (Sicily, Southern Italy), has been carried out. The investigation has been performed through different spectroscopic techniques: X-ray fluorescence (XRF) using an handheld energy-dispersive XRF analyzer, scanning electron microscopy equipped with an Energy Dispersive Spectrometry microanalysis detector (SEM-EDS) and Fourier transform infrared absorbance spectroscopy (FT-IR). The main goal is to identify the plaster and pigments material. In particular, the XRF investigation of surfaces is the first step for a preliminary elemental characterization. Then, through SEM-EDS measurements, a quantitative analysis of the chemical composition of the plaster and the pigmenting agents along with eventual components related to deterioration processes has been obtained. Finally, FT-IR absorbance spectra have proven to be a useful tool to investigate the molecular nature of the used materials.  相似文献   

17.
The present work reports a basic investigation aimed at optimizing laser cleaning interventions on pliocene sandstone of Siena. Irradiation trials were performed with a short free running Nd:YAG laser, on quarry samples and on samples from Palazzo Spannocchi presenting black crust. The physical parameterization associated with a detailed petrographic and mineralogic diagnostics of the induced effects, allowed the irradiation thresholds for damage phenomena to be derived and their nature understood. The experimental results reported here allow the definition of the best irradiation conditions and the laser parameter ranges for a safe and controlled black crust removal from pliocene sandstone.  相似文献   

18.
The painting Proas Iluminadas (Illuminated Bows) by Benito Quinquela Martín is studied by Raman spectroscopy in order to analyse the technique and the pigments employed by the artist: ultramarine blue, carbon black, cadmium-sulphure based compounds for the hue of yellow, orange and red; also zinc white, barium yellow, massicot yellow and viridian were observed. The importance of using different excitation laser lines in the analysis of mixtures of pigments is highlighted. The Raman mapping analysis of cross section samples shows the way the artist composed the ground layer: a lead white stratum over a calcite one. It also allows distinguishing between a mixture of components and strata superposition, both presenting the same appearance under an optical microscope. This paper provides information about the materials and techniques used in a period of Argentine art not studied before from this point of view.  相似文献   

19.
Laser cleaning of ancient marble and stone monuments is nowadays a well-accepted procedure in conservation. Operators and specialists are presently divided between those giving maximum confidence to this method of cleaning and others who, in contrast, are strongly critical and emphasise possible drawbacks and damages caused by laser. As any other method of cleaning, laser also offers advantages but at the same time is limited by drawbacks. Most conveniently, it should be integrated with the other methods. On the basis of the above considerations, the authors are proposing a combined procedure using laser cleaning as a first step – in this way removing the relevant part of black gypsum encrustation – followed by chemical methods as a final step. The latter, conveniently, could be accomplished by means of anion exchange resins, better than ammonium carbonate. An experimental check-up was made of four different methods applied on three different lithotypes on the façade of the Florentine Cathedral. Laser, micro-sandblasting, ammonium carbonate and sodium EDTA were the cleaning methods compared, whilst Carrara marble, green Serpentine (Verde di Prato) and a red limestone were the three lithotypes. Results are commented by showing differences in the advantages and drawbacks among the different methods on the various lithotypes.  相似文献   

20.
In the interdisciplinary domain of conservation science, a critical and selective eye is required in order to allow researchers to choose the most effective combination of analytical techniques for each project and, more importantly, to process and analyze the resulting volume of diverse data. The current essay attempts to combine a more traditional workflow for the examination of painted objects with techniques borrowed from the domain of computer science in order to yield the maximum amount of information and make that added knowledge more accessible to the researcher. The project was approached as a case study, regarding a post-Byzantine icon. Three-dimensional digitization with a laser scanning system, X-ray radiography and optical microscopy were applied for the determination of several structural characteristics of the painted surface and the icon's state of preservation. Multispectral imaging was used for the collection of surface spectral data, which were subsequently processed by means of cluster analysis in a novel approach to map the composition of the painted surface. Finally, micro-X-Ray Fluorescence (μ-XRF) was chosen as the primary source for surface pointwise elemental composition data while Fourier Transform Infrared Spectroscopy (FTIR) and Gas Chromatography coupled with Mass Spectroscopy (GC-MS) provided additional assistance in the characterization of materials based on their molecular structure. A custom platform was developed to address the issue of multilevel visualization and assessment of the data, designed to act as a tool for viewing and combining the acquired information. Via this integrated approach valuable information regarding the icon was revealed, including the verification of a prior conservation attempt and partial overpainting, the recording and quantification of the warping of the wooden panel and, finally, the identification of the constituent materials and their spatial distribution.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号