首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 314 毫秒
1.
This study aimed to identify the continuous ground reaction force (GRF) features which contribute to higher levels of block phase performance. Twenty-three sprint-trained athletes completed starts from their preferred settings during which GRFs were recorded separately under each block. Continuous features of the magnitude and direction of the resultant GRF signals which explained 90% of the variation between the sprinters were identified. Each sprinter’s coefficient score for these continuous features was then input to a linear regression model to predict block phase performance (normalised external power). Four significant (p < 0.05) predictor features associated with GRF magnitude were identified; there were none associated with GRF direction. A feature associated with greater rear block GRF magnitudes from the onset of the push was the most important predictor (β = 1.185), followed by greater front block GRF magnitudes for the final three-quarters of the push (β = 0.791). Features which included a later rear block exit (β = 0.254) and greater front leg GRF magnitudes during the mid-push phase (β = 0.224) were also significant predictors. Sprint practitioners are encouraged, where possible, to consider the continuous magnitude of the GRFs produced throughout the block phase in addition to selected discrete values.  相似文献   

2.
Sprint start performance has previously been quantified using several different measures. This study aimed to identify whether different measures could influence the performance-based ranking within a group of 12 sprinters, and if so, to identify the most appropriate measure. None of the 10 performance measures ranked all sprinters in the same order; Spearman's rho correlations between different block phase measures ranged from 0.50 to 0.94, and between block phase measures and those obtained beyond block exit from 0.66 to 0.85. Based on the consideration of what each measure quantifies, normalised average horizontal external power was identified as the most appropriate, incorporating both block velocity and the time spent producing this velocity. The accuracy with which these data could be obtained in an externally valid field setting was assessed against force platform criterion data. For an athlete producing 678 ± 40 W of block power, a carefully set-up manual high-speed video analysis protocol produced systematic and random errors of +5 W and ± 24 W, respectively. Since the choice of performance measure could affect the conclusions drawn from a technique analysis, for example the success of an intervention, it is proposed that external power is used to quantify start performance.  相似文献   

3.
The aim of this study was to explore the relationships between lower limb joint kinetics, external force production and starting block performance (normalised average horizontal power, NAHP). Seventeen male sprinters (100 m PB, 10.67 ± 0.32 s) performed maximal block starts from instrumented starting blocks (1000 Hz) whilst 3D kinematics (250 Hz) were also recorded during the block phase. Ankle, knee and hip resultant joint moment and power were calculated at the rear and front leg using inverse dynamics. Average horizontal force applied to the front (r = 0.46) and rear (r = 0.44) block explained 86% of the variance in NAHP. At the joint level, many “very likely” to “almost certain” relationships (r = 0.57 to 0.83) were found between joint kinetic data and the magnitude of horizontal force applied to each block although stepwise multiple regression revealed that 55% of the variance in NAHP was accounted for by rear ankle moment, front hip moment and front knee power. The current study provides novel insight into starting block performance and the relationships between lower limb joint kinetic and external kinetic data that can help inform physical and technical training practices for this skill.  相似文献   

4.
The aim of this study was to investigate differences in joint power generation between well-trained adult athletes and young sprinters from block clearance to initial contact of second stance. Eleven under 16 (U16) and 18 under 18 (U18) promising sprinters executed an explosive start action. Fourteen well-trained adult sprinters completed the exact same protocol. All athletes were equipped with 74 spherical reflective markers, while an opto-electronic motion analysis system consisting of 12 infrared cameras (250 Hz, MX3, Vicon, Oxford Metrics, UK) and 2 Kistler force plates (1,000 Hz) was used to collect the three-dimensional marker trajectories and ground reaction forces (Nexus, Vicon). Three-dimensional kinematics, kinetics, and power were calculated (Opensim) and time normalised from the first action after gunshot until initial contact of second stance after block clearance. This study showed that adult athletes rely on higher knee power generation during the first stance to induce longer step length and therefore higher velocity. In younger athletes, power generation of hip was more dominant.  相似文献   

5.
Abstract

This study investigated the association between explosive force production during isometric squats and athletic performance (sprint time and countermovement jump height). Sprint time (5 and 20 m) and jump height were recorded in 18 male elite-standard varsity rugby union players. Participants also completed a series of maximal- and explosive-isometric squats to measure maximal force and explosive force at 50-ms intervals up to 250 ms from force onset. Sprint performance was related to early phase (≤100 ms) explosive force normalised to maximal force (5 m, r = ?0.63, P = 0.005; and 20 m, r = ?0.54, P = 0.020), but jump height was related to later phase (>100 ms) absolute explosive force (0.51 < r < 0.61; 0.006 < P < 0.035). When participants were separated for 5-m sprint time (< or ≥ 1s), the faster group had greater normalised explosive force in the first 150 ms of explosive-isometric squats (33–67%; 0.001 < P < 0.017). The results suggest that explosive force production during isometric squats was associated with athletic performance. Specifically, sprint performance was most strongly related to the proportion of maximal force achieved in the initial phase of explosive-isometric squats, whilst jump height was most strongly related to absolute force in the later phase of the explosive-isometric squats.  相似文献   

6.
The 100 ms ruling for false start disqualification at athletic competitions governed by the International Association of Athletics Federations has been in force since the early 1990s. Throughout this period, there have been marked changes to the rules that govern the disqualification of athletes from sprint events incorporating starts from blocks. This study analysed all available World and European Championship response-time (RT) data from 1999 to 2014 to examine effects of rule changes on competition RT at major championships. The exponentially modified Gaussian distribution was used to model RT and make comparisons relative to athletes’ sex, ruling periods and competition rounds. Revised RT thresholds of 115 ms and 119 ms were identified for men and women, respectively, indicating that the current 100 ms rule could result in some false starts not being detected in competitive athletics. The study proposes that when using existing International Association of Athletics Federations approved systems, the false start detection threshold should be increased and that men and women athletes should have different thresholds because of substantial evidence of a sex-based difference in RT in elite-standard athletes.  相似文献   

7.
The purposes of this study were to characterise the golfer–ground interactions during the swing and to identify meaningful associations between the golfer–ground interaction force/moment parameters and the maximum clubhead speed in 63 highly skilled male golfers (handicap ≤ 3). Golfers performed shots in 3 club conditions (driver, 5-iron and pitching wedge) which were captured by an optical motion capture system and 2 force plates. In addition to the ground reaction forces (GRFs), 3 different golfer–ground interaction moments (GRF moments, pivoting moments and foot contact moments) were computed. The GRF moment about the forward/backward (F/B) axis and the pivoting moment about the vertical axis were identified as the primary moments. Significant (p < 0.05) correlations of peak force parameters (all components in the lead foot and F/B component in the trail foot) and peak moment parameters (lead-foot GRF moment and trail-foot pivoting moment) to clubhead speed were found. The lead-foot was responsible for generating the GRF moment, while the trail foot contributed to the pivoting moment more. The instant the lead arm becomes parallel to the ground was identified as the point of maximum angular effort, and the loading onto the lead-foot near this point was critical in generating both peak moments.  相似文献   

8.
Abstract

Researchers and clinicians have suggested that overuse injuries to the lower back and lower extremities of figure skaters may be associated with the repeated high impact forces sustained during jump landings. Our primary aim was to compare the vertical ground reaction forces (GRFs) in freestyle figure skaters (n = 26) and non-skaters (n = 18) for the same barefoot single leg landing on a force plate from a 20 cm platform. Compared with non-skaters, skaters exhibited a significantly greater normalised peak GRF (3.50 ± 0.47 × body weight for skaters vs. 3.13 ± 0.45 × body weight for non-skaters), significantly shorter time to peak GRF (81.21 ± 14.01 ms for skaters vs. 93.81 ± 16.49 ms for non-skaters), and significantly longer time to stabilisation (TTS) of the GRF (2.38 ± 0.07 s for skaters vs. 2.22 ± 0.07 s for non-skaters). Skaters also confined their centre of pressure (CoP) to a significantly smaller mediolateral (M–L) (25%) and anterior–posterior (A–P) (40%) range during the landing phase, with the position of the CoP located in the mid to forefoot region. The narrower and more forward position of the CoP in skaters may at least partially explain the greater peak GRF, shorter time to peak, and longer TTS. Training and/or equipment modification serve as potential targets to decrease peak GRF by distributing it over a longer time period. More comprehensive studies including electromyography and motion capture are needed to fully characterise the unique figure skater landing strategy.  相似文献   

9.
Sprint start performance has previously been quantified using several different measures. This study aimed to identify whether different measures could influence the performance-based ranking within a group of 12 sprinters, and if so, to identify the most appropriate measure. None of the 10 performance measures ranked all sprinters in the same order; Spearman's rho correlations between different block phase measures ranged from 0.50 to 0.94, and between block phase measures and those obtained beyond block exit from 0.66 to 0.85. Based on the consideration of what each measure quantifies, normalised average horizontal external power was identified as the most appropriate, incorporating both block velocity and the time spent producing this velocity. The accuracy with which these data could be obtained in an externally valid field setting was assessed against force platform criterion data. For an athlete producing 678 +/- 40 W of block power, a carefully set-up manual high-speed video analysis protocol produced systematic and random errors of +5 Wand +/- 24 W, respectively. Since the choice of performance measure could affect the conclusions drawn from a technique analysis, for example the success of an intervention, it is proposed that external power is used to quantify start performance.  相似文献   

10.
This study investigated how manipulating first step width affects 3D external force production, centre of mass (CoM) motion and performance in athletic sprinting. Eight male and 2 female competitive sprinters (100m PB: 11.03 ± 0.36 s male and 11.6 ± 0.45 s female) performed 10 maximal effort block starts. External force and three-dimensional kinematics were recorded in both the block and first stance phases. Five trials were performed with the athletes performing their preferred technique (Skating) and five trials with the athletes running inside a 0.3 m lane (Narrow). By reducing step width from a mean of 0.31 ± 0.06 m (Skating) to 0.19 ± 0.03 m (Narrow), reductions were found between the two styles in medial block and medial 1st stance impulses, 1st stance anterior toe-off velocity and mediolateral motion of the CoM. No differences were found in block time, step length, stance time, average net resultant force vector, net anteroposterior impulse nor normalised external power. Step width correlated positively with medial impulse but not with braking nor net anteroposterior impulse. Despite less medially directed forces and less mediolateral motion of the CoM in the Narrow trials, no immediate improvement to performance was found by restricting step width.  相似文献   

11.
Propulsion and bracing ground reaction force (GRF) in overhand throwing are integral in propagating joint reaction kinetics and ball velocity, yet how stride length effects drive (hind) and stride (lead) leg GRF profiles remain unknown. Using a randomised crossover design, 19 pitchers (15 collegiate and 4 high school) were assigned to throw 2 simulated 80-pitch games at ±25% of their desired stride length. An integrated motion capture system with two force plates and radar gun tracked each throw. Vertical and anterior–posterior GRF was normalised then impulse was derived. Paired t-tests identified whether differences between conditions were significant. Late in single leg support, peak propulsion GRF was statistically greater for the drive leg with increased stride. Stride leg peak vertical GRF in braking occurred before acceleration with longer strides, but near ball release with shorter strides. Greater posterior shear GRF involving both legs demonstrated increased braking with longer strides. Conversely, decreased drive leg propulsion reduced both legs’ braking effects with shorter strides. Results suggest an interconnection between normalised stride length and GRF application in propulsion and bracing. This work has shown stride length to be an important kinematic factor affecting the magnitude and timing of external forces acting upon the body.  相似文献   

12.
Base stealing is an important tactic for increasing the chance of scoring in baseball. This study aimed to compare the crossover step (CS) and jab step (JS) starts for base stealing start performance and to clarify the differences between CS and JS starts in terms of three-dimensional lower extremity joint kinetics. Twelve male baseball players performed CS and JS starts, during which their motion and the force they applied to the ground were simultaneously recorded using a motion-capture system and two force platforms. The results showed that the normalised average forward external power, the average forward–backward force exerted by the left leg, and the forward velocities of the whole body centre of gravity generated by both legs and the left leg were significantly higher for the JS start than for the CS start. Moreover, the positive work done by hip extension during the left leg push-off was two-times greater for the JS start than the CS start. In conclusion, this study has demonstrated that the jab step start may be the better technique for a base stealing start and that greater positive work produced by left hip extension is probably responsible for producing its larger forward ground reaction force.  相似文献   

13.
We investigated the rotational effect of buoyant force around the body’s transverse axis, termed buoyant torque, during a 200m front crawl maximal swim. Eleven male swimmers of national or international level participated. One stroke cycle (SC) for each 50m was recorded with two above and four below water cameras. The following variables were analysed: swimming velocity; absolute and normalised buoyant force; minimum, average and maximum buoyant torque; SC and arm recovery times. The average value of buoyant torque was higher in the first 50m (14.2 ± 4.5Nm) than in the following 150m (9.3 ± 4.1Nm~10.9 ± 4.5Nm) and was directed to raise the legs and lower the head throughout the race. The change in its magnitude seemed to be linked to the shorter time spent proportionally in arm recovery (first 50m: 27.6% of SC time; next 150m: 23.3–24.4% of SC time). Most swimmers had periods of the SC where buoyant torque was directed to sink the legs, which accounted to 10% of SC time in the first 50m and about twice this duration in the next 150m. These periods were observed exclusively at some instances when the recovering arm had entered the water while the opposite arm was still underwater.  相似文献   

14.
设计了一个用测力台测试散打侧踹动作动力学特性的方法，并用该方法对8名我国男子优秀散打运动员进行了测试，结果表明：运动员侧踹时，从接触到最大力量的时间为20。左右，整个侧踹过程的时间平均为170ms，平均最大侧踹力量达到925kg；运动员的左右腿之间存在明显的差异，优势腿在最大力量、爆发力及冲量等动力学指标方面均显著地强于弱势腿。  相似文献   

15.
This study analysed the validity and reliability of a new optoelectronic device (Velowin) for the measurement of vertical displacement and velocity as well as to estimate force and mechanical power. Eleven trained males with Mean (SD) age = 27.4 (4.8) years, completed an incremental squat exercise test with 5 different loads (<30–90% of their 1?repetition maximum) while displacement and vertical velocity of the barbell were simultaneously measured using an integrated 3D system (3D motion capture system + force platform) and Velowin. Substantial to almost perfect correlation (concordance correlation coefficient = 0.75–0.96), root mean square error as coefficient of variation ±90% confidence interval ≤10% and good to excellent intraclass correlation coefficient = 0.84–0.99 were determined for all the variables. Passing and Bablock regression methods revealed no differences for average velocity. However, significant but consistent bias were determined for average or peak force and power while systematic and not proportional bias was found for displacement. In conclusion, Velowin, in holds of some potential advantages over traditionally used accelerometer or linear transducers, represents a valid and reliable alternative to monitor vertical displacement and velocity as well as to estimate average force and mechanical power during the squat exercise.  相似文献   

16.
A number of field-based investigations have evidenced practically significant relationships between clubhead velocity (CHV), vertical jump performance and maximum strength. Unfortunately, whilst these investigations provide a great deal of external validity, they are unable to ascertain vertical ground reaction force (vGRF) variables that may relate to golfers’ CHVs. This investigation aimed to assess if the variance in European Challenge Tour golfers’ CHVs could be predicted by countermovement jump (CMJ) positive impulse (PI), isometric mid-thigh pull (IMTP) peak force (PF) and rate of force development (RFD) from 0–50 ms, 0–100 ms, 0–150 ms and 0–200 ms. Thirty-one elite level European Challenge Tour golfers performed a CMJ and IMTP on dual force plates at a tournament venue, with CHV measured on a driving range. Hierarchical multiple regression results indicated that the variance in CHV was significantly predicted by all four models (model one R2 = 0.379; model two R2 = 0.392, model three R2 = 0.422, model four R2 = 0.480), with Akaike’s information criterion indicating that model one was the best fit. Individual standardised beta coefficients revealed that CMJ PI was the only significant variable, accounting for 37.9% of the variance in European Challenge Tour Golfers’ CHVs.  相似文献   

17.
The purpose of this study was to determine the between day reliability of power-time measures calculated with data collected using the linear position transducer or the force plate independently, or a combination of the two technologies. Twenty-five male rugby union players performed three jump squats on two occasions one week apart. Ground reaction forces were measured via a force plate and position data were collected using a linear position transducer. From these data, a number of power-time variables were calculated for each method. The force plate, linear position transducer and a combined method were all found to be a reliable means of measuring peak power (ICC = 0.87‐0.95, CV = 3.4%‐8.0%). The absolute consistency of power-time measures varied between methods (CV = 8.0%‐53.4%). Relative consistency of power-time measures was generally comparable between methods and measures, and for many variables was at an acceptable level (ICC = 0.77‐0.94). Although a number of time-dependent power variables can be reliably calculated from data acquired from the three methods investigated, the reliability of a number of these measures is below that which is acceptable for use in research and for practical applications.  相似文献   

18.
Abstract

Cerebral palsy is known to generally limit range of motion and force producing capability during movement. It also limits sprint performance, but the exact mechanisms underpinning this are not well known. One elite male T36 multiple-Paralympic sprint medallist (T36) and 16 well-trained able-bodied (AB) sprinters each performed 5–6 maximal sprints from starting blocks. Whole-body kinematics (250 Hz) in the block phase and first two steps, and synchronised external forces (1,000 Hz) in the first stance phase after block exit were combined to quantify lower limb joint kinetics. Sprint performance (normalised average horizontal external power in the first stance after block exit) was lower in T36 compared to AB. T36 had lower extensor range of motion and peak extensor angular velocity at all lower limb joints in the first stance after block exit. Positive work produced at the knee and hip joints in the first stance was lower in T36 than AB, and the ratio of positive:negative ankle work produced was lower in T36 than AB. These novel results directly demonstrate the manner in which cerebral palsy limits performance in a competition-specific sprint acceleration movement, thereby improving understanding of the factors that may limit performance in elite sprinters with cerebral palsy.  相似文献   

19.
The purpose of this study was to investigate effects of the ground reaction forces on the rotation of the body as a whole and on the joint torques of the lower limbs associated with trunk and pelvic rotation in baseball tee batting. A total of 22 male collegiate baseball players participated in this study. Three-dimensional coordinate data were acquired by a motion capture system (250 Hz), and ground reaction forces of both legs were measured with three force platforms (1,000 Hz). Kinetic data were used to calculate the moment about the vertical axis through the body’s centre of mass resulting from ground reaction forces, as well as to calculate the torque and mechanical work in the lower limb joints. The lateral/medial ground reaction force generated by both legs resulted in the large whole body moment about its vertical axis. The joint torques of flexion/extension of both hips, adduction of the stride hip and extension of the stride knee produced significantly larger mechanical work than did the other joint torques. To obtain high bat-head speed, the batter should push both legs in the lateral/medial direction by utilising both hips and stride knee torques so as to increase the whole body rotation.  相似文献   

20.
The aims of this study were to evaluate the accuracy of centre of pressure (COP) data obtained during transition of load across the boundary between two force plates, and secondly to examine the effect of such COP data on joint kinetics during sprint running performances. COP data were collected from two piezoelectric force plates as a trolley wheel was rolled across the boundary between the plates. Position data for the trolley were collected using an opto-electronic motion analysis system for comparison with COP data. Mean COP errors during transition across the plate boundary were 0.003 ± 0.002 m relative to a control point. Kinematic and kinetic data were also collected from eight athletes during sprint running trials to demonstrate the sensitivity of the inverse dynamics analysis to COP error for the ground contact phase of the dynamic movement trials. Kinetic sensitivity to the COP error was assessed during the entire stance phase for the ankle, knee, and hip joints and was less than 5% and 3% for joint moment and power data, respectively. Based on the small COP error during transition across plate boundaries, it is recommended that foot contacts overlapping two force plates may be included in inverse dynamics analyses.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号