首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
ABSTRACT

Cricket fast bowling is a dynamic activity in which a bowler runs up and repeatedly delivers the ball at high speeds. Experimental studies have previously linked ball release speed and several technique parameters with conflicting results. As a result, computer simulation models are increasingly being used to understand the effects of technique on performance. This study evaluates a planar 16-segment whole-body torque-driven simulation model of the front foot contact phase of fast bowling by comparing simulation output with the actual performance of an elite fast bowler. The model was customised to the bowler by determining subject-specific inertia and torque parameters. Good agreement was found between actual and simulated performances with a 4.0% RMS difference. Varying the activation timings of the torque generators resulted in an optimised simulation with a ball release speed 3.5 m/s faster than the evaluation simulation. The optimised technique used more extended front ankle and knee joint angles, increased trunk flexion and a longer delay in the onset of arm circumduction. These simulations suggest the model provides a realistic representation of the front foot contact phase of fast bowling and is suitable to investigate the limitations of kinematic or kinetic variables on fast bowling performance.  相似文献   

2.
We investigated the techniques used by nine right-handed, international batsmen to perform front foot off-side drives in first class and international matches. All strokes were captured using two synchronised high-speed video cameras; nine were selected for kinematic analysis. These movement sequences were then manually digitised at a sampling frequency of 125 Hz using APAS motion analysis software. The results of this study indicated that the batsmen used movement patterns that enabled important aspects of stroke production, such as the front stride and the downswing of the bat, to be delayed so that additional information from ball flight could be assimilated. Front upper limb segments were constrained to work in a unitary fashion, with the peak horizontal end point speed of each segment occurring almost simultaneously just before impact. It has been suggested that these strategies serve to enhance stroke accuracy. Other aspects of their techniques included a distinctively looped bat path, a front foot placement that occurred only just before impact, and a front ankle that was positioned well inside the line of the ball at impact. Various technical parameters, such as the alignment of the trunk relative to ground and the continuous flow of the bat between the backswing and downswing, were similar to findings in previous batting research. Other characteristics of stroke production not previously addressed, including the path of the bat and the timing of the front stride, may challenge some long held beliefs evident in current coaching literature.  相似文献   

3.
Analysing the centre of pressure (COP) and centre of gravity (COG) could reveal stabilising strategies used by golfers throughout the golf swing. This study identified and compared golfers’ COP and COG patterns throughout the golf swing in medial–lateral (ML) and anterior–posterior (AP) directions using principal component analysis (PCA) and examined their relationship to clubhead velocity. Three-dimensional marker trajectories were collected using Vicon motion analysis and force plate data from two Kistler force plates for 22 low-handicap golfers during drives. Golfers’ COG and COP were expressed as a percentage distance between their feet. PCA was performed on COG and COP in ML and AP directions. Relationships between principal component (PC) scores were examined using Pearson correlation and regression analysis used to examine the relationship with clubhead velocity. ML COP movements varied in magnitude (PC1), rate of change and timing (PC2 and PC3). The COP and COG PC1 scores were strongly correlated in both directions (ML: r?=?0.90, P?<?.05; AP: r?=?0.81, P?<?.05). Clubhead velocity, explained by three PCs (74%), related to timing and rate of change in COPML near downswing (PC2 and PC3) and timing of COGML late backswing (PC2). The relationship between COPML and COGML PC1 scores identified extremes of COP and COG patterns in golfers and could indicate a golfer’s dynamic balance. Golfers with earlier movement of COP to the front foot (PC2) and rate of change (PC3) patterns in ML COP, prior to the downswing, may be more likely to generate higher clubhead velocity.  相似文献   

4.
The purpose of this study was to quantify trunk axial rotation and angular acceleration in pitching and batting of elite baseball players. Healthy professional baseball pitchers (n = 40) and batters (n = 40) were studied. Reflective markers attached to each athlete were tracked at 240 Hz with an eight-camera automated digitizing system. Trunk axial rotation was computed as the angle between the pelvis and the upper trunk in the transverse plane. Trunk angular acceleration was the second derivative of axial rotation. Maximum trunk axial rotation (55 ± 6°) and angular acceleration (11,600 ± 3,100 °/s2) in pitching occurred before ball release, approximately at the instant the front foot landed. Maximum trunk axial rotation (46 ± 9°) and angular acceleration (7,200 ± 2,800 °/s2) in batting occurred in the follow-through after ball contact. Thus, the most demanding instant for the trunk and spine was near front foot contact for pitching and after ball contact for batting.  相似文献   

5.
Introduction: Adolescent fast bowlers are prone to sustaining lumbar injuries. Numerous components have been identified as contributing factors; however, there is limited empirical evidence outlining how the muscles of the lumbopelvic region, which play a vital role in stabilising the spine, function during the bowling action and the influence of such activation on injuries in the fast bowler. Methods: Surface electromyography was utilised to measure the function of the lumbar erector spinae, lumbar multifidus, gluteus medius and gluteus maximus muscles bilaterally during the fast bowling action in a group of 35 cricket fast bowlers aged 12–16 years. Results: Two prominent periods of activation occurred in each of the muscles examined. The period of greatest mean activation in the erector spinae and multifidus occurred near back foot contact (BFC) and within the post-ball-release (BR) phase. The period of greatest mean activation for the gluteus medius and gluteus maximus occurred during phases of ipsilateral foot contact. Discussion: The greatest periods of muscle activation in the paraspinal and gluteal muscles occurred at times where vertical forces were high such as BFC, and in the phases near BR where substantial shear forces are present. Conclusion: The posterior muscles within the lumbopelvic region appear to play a prominent role during the bowling action, specifically when compressive and shear forces are high. Further research is required to substantiate these findings and establish the role of the lumbopelvic muscles in the aetiology of lumbar injury in the cricket fast bowler.  相似文献   

6.
ABSTRACT

This study sought to determine whether playing on a shorter cricket pitch would lead batters to make more appropriate decisions about whether to play front foot or back foot shots. Based on an analysis of the shots played by top order batters against seam bowling in county under-10 matches, an age-specific “good length” region between 5.0 yards and 6.5 yards (4.57 to 5.94 m) from the batters’ stumps was derived. This was where batters were uncertain whether to play on the front or back foot. It was then possible to define deliveries as “short” or “full” depending upon whether they bounced further from or nearer to the batter than the good length region. Club under-11 and county under-10 match data revealed that when playing on a 16-yard pitch batters played more back foot shots to short balls, and county batters also played more front foot shots to full balls compared with matches on the currently recommended 20- or 19-yard pitches. For batters, a shorter pitch should strengthen the coupling between the perception of delivery length and appropriate shot selection, and the increased task demand should lead to improved anticipation, both key features of skilled batting.  相似文献   

7.
A cinematographic analysis of the drive off the front foot (D) and the forward defensive stroke (FD) was undertaken to establish the kinematic and kinetic factors involved in playing these strokes against medium-fast bowling. Fourteen provincial cricket batsmen were filmed at 100 Hz while batting on a turf pitch with a specially instrumented bat. Results for the drive off the front foot revealed that the movement and stroke pattern were generally supportive of the coaching literature, with the forward defensive stroke forming the basis of the drive. Certain mechanical differences, although non-significant, were evident to facilitate the attacking nature of the front foot drive and included a higher backlift (FD = 0.65 m; D = 0.74 m), later commencement of the stride (FD = 0.64 s pre-impact; D = 0.58 s pre-impact) and downswing of the bat (FD = 0.38 s pre-impact; D = 0.36 s pre-impact), a shorter front foot stride (FD = 0.72 m; D = 0.68 m) with the front foot placement taking place later (FD = 0.14 s pre-impact; D = 0.06 s pre-impact), and the back foot dragging further forward at impact (FD = 0.05 m; D = 0.10 m). The front upper limb moved as a multi-segmental series of levers, which resulted in the drive showing significantly greater (P< 0.05) peak bat horizontal velocity at 0.02 s pre-impact (FD = 3.53 +/- 3.44 m s(-1); D = 11.8 +/- 4.61 m x s(-1)) and 0.02 s post-impact (FD = 2.73 +/- 2.88 m x s(-1); D = 11.3 +/- 4.21 m x s(-1)). The drive showed a significantly greater (P < 0.05) bat-ball closing horizontal velocity (FD = 24.2 +/- 4.65 m x s(-1); D = 32.3 +/- 5.06 m x s(-1)) and post-impact ball horizontal velocity (FD = 6.85 +/- 5.12 m x s(-1); D = 19.5 +/- 2.13 m x s(-1)) than for the forward defensive stroke. The point of bat-ball contact showed nonsignificant differences, but occurred further behind the front ankle (FD = 0.09 +/- 0.17 m; D = 0.20 +/- 0.13 m), with the bat more vertical at impact (FD = 62.6 +/- 6.53 degrees ; D = 77.8 +/- 7.05 degrees). Significant differences (P< 0.01) occurred between the grip forces of the top and bottom hands for the two strokes, with the principal kinetic finding that the top hand plays the dominant role during the execution of the drive with the bottom hand reinforcing it at impact. Similar grip force patterns for the two strokes occurred during the initial part of the stroke, with the drive recording significantly greater (P < 0.05) forces at 0.02 s pre-impact (top hand: FD = 129 +/- 41.6 N; D = 199 +/- 40.9 N; bottom hand: FD = 52.2 +/- 16.9 N; D = 91.8 +/- 41.1 N), at impact (top hand: FD = 124 +/- 29.3 N; D = 158 +/- 56.2 N; bottom hand: FD = 67.1 +/- 21.5 N; D = 86.2 +/- 58.2 N) and 0.02 s post-impact (top hand: FD = 111 +/- 22.2 N; D = 126 +/- 28.5 N; bottom hand: FD = 65.5 +/- 26.9 N; D = 82.4 +/- 28.6 N).  相似文献   

8.
Previous planar models of the downswing in golf have suggested that upper limb segments (left shoulder girdle and left arm) move in a consistent fixed plane and that the clubhead also moves only in this plane. This study sought to examine these assumptions. Three-dimensional kinematic analysis of seven right-handed golfers of various abilities (handicap 0?–?15) was used to define a plane (named the left-arm plane) containing the 7th cervical vertebra, left shoulder and left wrist. We found that the angles of this plane to the reference horizontal z axis and target line axis (parallel to the reference x axis) were not consistent. The angle to the horizontal z axis varied from a mean of 133° (s = 1°) at the start of the downswing to 102° (s = 4°) at impact, suggesting a “steepening” of the left-arm plane. The angle of the plane to the target line changed from ??9° (s = 16°) to 5° (s = 15°) during the same period, showing anticlockwise (from above) rotation, although there was large inter-individual variation. The distance of the clubhead from the left-arm plane was 0.019?m (s = 0.280?m) at the start at the downswing and 0.291?m (s = 0.077?m) at impact, showing that the clubhead did not lie in the same plane as the body segments. We conclude that the left arm and shoulder girdle do not move in a consistent plane throughout the downswing, and that the clubhead does not move in this plane. Previous models of the downswing in golf may therefore be incorrect, and more complex (but realistic) simulations should be performed.  相似文献   

9.
This study aimed to investigate whether high peak ground reaction forces and high average loading rates are necessary to bowl fast. Kinematic and kinetic bowling data were collected for 20 elite male fast bowlers. A moderate non-significant correlation was found between ball speed and peak vertical ground reaction force with faster bowlers tending to have lower peak vertical ground reaction force (r = ?0.364, P = 0.114). Faster ball speeds were correlated with both lower average vertical and lower average horizontal loading rates (r = ?0.452, P = 0.046 and r = ?0.484, P = 0.031, respectively). A larger horizontal (braking) impulse was associated with a faster ball speed (r = 0.574, P = 0.008) and a larger plant angle of the front leg (measured from the vertical) at front foot contact was associated with a larger horizontal impulse (r = 0.706, P = 0.001). These findings suggest that there does not necessarily need to be a trade-off between maximum ball release speed and the forces exerted on fast bowlers (peak ground reaction forces and average loading rates). Furthermore, it appears that one of the key determinants of ball speed is the horizontal impulse generated at the ground over the period from front foot contact until ball release.  相似文献   

10.
Abstract

We compared the movement patterns of cricketers in different playing positions across three formats of cricket (Twenty20, One Day, multi-day matches). Cricket Australia Centre of Excellence cricketers (n = 42) from five positions (batting, fast bowling, spin bowling, wicketkeeping, and fielding) had their movement patterns (walk, jog, run, stride, and sprint) quantified by global positioning system (GPS) technology over two seasons. Marked differences in movement patterns were evident between positions and game formats, with fast bowlers undertaking the greatest workload of any position in cricket. Fast bowlers sprinted twice as often, covered over three times the distance sprinting, with much smaller work-to-recovery ratios than other positions. Fast bowlers during multi-day matches covered 22.6 ± 4.0 km (mean ± s) total distance in a day (1.4 ± 0.9 km in sprinting). In comparison, wicketkeepers rarely sprinted, despite still covering a daily total distance of 16.6 ± 2.1 km. Overall, One Day and Twenty20 cricket required ～50 to 100% more sprinting per hour than multi-day matches. However, multi-day cricket's longer duration resulted in 16–130% more sprinting per day. In summary, the shorter formats (Twenty20 and One Day) are more intensive per unit of time, but multi-day cricket has a greater overall physical load.  相似文献   

11.
ABSTRACT

The aim of this study was to identify the key kinematic parameters which contribute to higher spin rates in elite finger spin bowling. Kinematic data were collected for twenty-three elite male finger spin bowlers with thirty kinematic parameters calculated for each delivery. Stepwise linear regression and Pearson product moment correlations were used to identify kinematic parameters linked to spin rate. Pelvis orientation at front foot contact (r = 0.674, p < 0.001) and ball release (r = 0.676, p < 0.001) were found to be the biggest predictors of spin rate, with both individually predicting 43% of the observed variance in spin rate. Other kinematic parameters correlated with spin rate included: shoulder orientation at ball release (r = 0.462, p = 0.027), and pelvis-shoulder separation angle at front foot contact (r = 0.521, p = 0.011). The bowlers with the highest spin rates adopted a mid-way pelvis orientation angle, a larger pelvis-shoulder separation angle and a shoulder orientation short of side-on at front foot contact. The segments then rotated sequentially, starting with the pelvis and finishing with the pronation of the forearm. This knowledge can be translated to coaches to provide a better understanding of finger spin bowling technique.  相似文献   

12.
Spin bowling is generally coached using a standard technical framework, but this practice has not been based upon a comparative biomechanical analysis of leg-spin and off-spin bowling. This study analysed the three-dimensional (3D) kinematics of 23 off-spin and 20 leg-spin bowlers using a Cortex motion analysis system to identify how aspects of the respective techniques differed. A multivariate ANOVA found that certain data tended to validate some of the stated differences in the coaching literature. Off-spin bowlers had a significantly shorter stride length (p = 0.006) and spin rate (p = 0.001), but a greater release height than leg-spinners (p = 0.007). In addition, a number of other kinematic differences were identified that were not previously documented in coaching literature. These included a larger rear knee flexion (p = 0.007), faster approach speed (p < 0.001), and flexing elbow action during the arm acceleration compared with an extension action used by most of the off-spin bowlers. Off-spin and leg-spin bowlers also deviated from the standard coaching model for the shoulder alignment, front knee angle at release, and forearm mechanics. This study suggests that off-spin and leg-spin are distinct bowling techniques, supporting the development of two different coaching models in spin bowling.  相似文献   

13.
A cinematographic analysis of the drive off the front foot (D) and the forward defensive stroke (FD) was undertaken to establish the kinematic and kinetic factors involved in playing these strokes against medium-fast bowling. Fourteen provincial cricket batsmen were filmed at 100 Hz while batting on a turf pitch with a specially instrumented bat. Results for the drive off the front foot revealed that the movement and stroke pattern were generally supportive of the coaching literature, with the forward defensive stroke forming the basis of the drive. Certain mechanical differences, although non-significant, were evident to facilitate the attacking nature of the front foot drive and included a higher backlift (FD = 0.65 m; D = 0.74 m), later commencement of the stride (FD = 0.64 s pre-impact; D = 0.58 s pre-impact) and downswing of the bat (FD = 0.38 s pre-impact; D = 0.36 s pre-impact), a shorter front foot stride (FD = 0.72 m; D = 0.68 m) with the front foot placement taking place later (FD = 0.14 s pre-impact; D = 0.06 s pre-impact), and the back foot dragging further forward at impact (FD = 0.05 m; D = 0.10 m). The front upper limb moved as a multi-segmental series of levers, which resulted in the drive showing significantly greater (P < 0.05) peak bat horizontal velocity at 0.02 s preimpact (FD = 3.53 ± 3.44 m . s -1 ; D = 11.8 ± 4.61 m . s -1 ) and 0.02 s post-impact (FD = 2.73 ± 2.88 m . s -1 ; D = 11.3 ± 4.21 m . s -1 ). The drive showed a significantly greater (P < 0.05) bat-ball closing horizontal velocity (FD = 24.2 ± 4.65 m . s-1; D = 32.3 ± 5.06 m . s -1 ) and post-impact ball horizontal velocity (FD = 6.85 5.12 m . s -1 ; D = 19.5 ± 2.13 m . s -1 ) than for the forward defensive stroke. The point of bat-ball contact showed nonsignificant differences, but occurred further behind the front ankle (FD = 0.09 ± 0.17 m; D = 0.20 ± 0.13 m), with the bat more vertical at impact (FD = 62.6 ± 6.53 ; D = 77.8 ± 7.05). Significant differences (P < 0.01) occurred between the grip forces of the top and bottom hands for the two strokes, with the principal kinetic finding that the top hand plays the dominant role during the execution of the drive with the bottom hand reinforcing it at impact. Similar grip force patterns for the two strokes occurred during the initial part of the stroke, with the drive recording significantly greater (P < 0.05) forces at 0.02 s pre-impact (top hand: FD = 129 ± 41.6 N; D = 199 ± 40.9 N; bottom hand: FD = 52.2 ± 16.9 N; D = 91.8 ± 41.1 N), at impact (top hand: FD = 124 ± 29.3 N; D = 158 ± 56.2 N; bottom hand: FD = 67.1 ± 21.5 N; D = 86.2 ± 58.2 N) and 0.02 s postimpact (top hand: FD = 111 ± 22.2 N; D = 126 ± 28.5 N; bottom hand: FD = 65.5 ± 26.9 N; D = 82.4 ± 28.6 N).  相似文献   

14.
Abstract

The golf swing has been modelled as a planar movement, but recent findings suggest that the upper limbs and golf club do not move in a single plane. However, the idea that the club alone can be swung in a single inclined plane has not been investigated mathematically. The aims of this study were to determine whether a single plane could be fitted to club motion, and if this plane varied for different clubs. Ten golfers (handicap 1 – 5) performed repeated, consistent swings with three clubs (driver, 5-iron, and pitching wedge). The motion of each club during the downswing was fitted to a single plane. The fit of the plane varied between golfers and clubs (r 2 = 0.871 – 0.995, root mean square residual = 44.9 – 166.2 mm). Mean angles of the plane to the reference horizontal Z axis (driver: 125.5°, s = 3.0; 5-iron: 117.1°, s = 3.0; wedge: 113.6°, s = 2.7) and target line axis (driver: ?7.8°, s = 5.9; 5-iron: ?4.9°, s = 5.7; wedge: ?5.9°, s = 6.0) were significantly (P < 0.05) different. Further analysis revealed a single plane was more appropriate for some participants than others, but that it might be neither desirable nor possible in some cases.  相似文献   

15.
Abstract

The aim of this study was to examine the effect of playing formation on high-intensity running and technical performance during elite soccer matches. Twenty English FA Premier League games were analysed using a multiple-camera computerized tracking system (n = 153 players). Overall ball possession did not differ (P > 0.05) between 4–4–2, 4–3–3 and 4–5–1 formations (50%, s = 7 vs. 49%, s = 8 vs. 44%, s = 6). No differences were observed in high-intensity running between 4–4–2, 4–3–3 and 4–5–1 formations. Compared with 4–4–2 and 4–3–3 formations, players in a 4–5–1 formation performed less very high-intensity running when their team was in possession (312 m, s = 196 vs. 433 m, s = 261 vs. 410 m, s = 270; P < 0.05) but more when their team was not in possession (547 m, s = 217 vs. 461 m, s = 156 vs. 459 m, s = 169; P < 0.05). Attackers in a 4–3–3 performed ～30% more (P < 0.05) high-intensity running than attackers in 4–4–2 and 4–5–1 formations. However, the fraction of successful passes was highest in a 4–4–2 (P < 0.05) compared with 4–3–3 and 4–5–1 formations. The results suggest that playing formation does not influence the overall activity profiles of players, except for attackers, but impacts on very high-intensity running activity with and without ball possession and some technical elements of performance.  相似文献   

16.
Three‐dimensional (3‐D) high‐speed cinematographic techniques were used to record topspin and backspin forehand approach shots hit down‐the‐line by high‐performance players. The direct linear transformation (DLT) technique was used in the 3‐D space reconstruction from 2‐D images recorded via laterally placed phase‐locked cameras operating at 200 Hz. A Mann‐Whitney U‐test was calculated for the different aspects of the topspin and backspin shots to test for significance (P<0.05).

A significant difference was recorded between topspin and backspin shots in the angle of the racket at the completion of the backswing. The racket was taken 0.48 rad past a line drawn perpendicular to the back fence for topspin trials, but only rotated 0.86 rad from a line parallel to the net in the backspin shot. Maximum racket velocities occurred prior to impact and were significantly higher in topspin (26.5 m s‐1) compared to backspin (16.6 m s‐1) trials. This resulted in the topspin trials recording a significantly higher ball velocity compared to backspin trials (27.6 m s‐1 vs 21.7 m s‐1). Pre‐impact racket trajectories revealed that in topspin shots the racket moved on an upward path of 0.48 rad while in backspin shots it moved down at an angle of 0.34 rad. In the topspin trials impact occurred significantly further forward of the front foot than in backspin shots (0.26 m vs 0.05 m) while the angle of the racket was the same for both strokes (0.14 rad behind a line parallel to the net). The mean angle of the racket‐face at impact was inclined backwards by 0.11 rad for backspin strokes and rotated forward by 0.13 rad for topspin strokes. Angles of incidence and reflection of the impact between the ball and the court showed that backspin trials had larger angles of incidence and reflection than topspin strokes.  相似文献   

17.
The purpose of this study was to assess how cognitive and physical performance are affected during a prolonged, fatigue-inducing cricket-batting simulation. Fifteen amateur batters from three Eastern Cape schools in South Africa were recruited (mean ± SD: age 17 ± 0.92 years; stature 1.75 ± 0.07 m; body mass 78.3 ± 13.2 kg). Participants completed a 6-stage, 30-over batting simulation (BATEX©). During the protocol, there were five periods of cognitive assessment (CogState brief test battery, Melbourne, Australia). The primary outcome measures from each cognitive task were speed and accuracy/error rates. Physiological (heart rate) and physical (sprint times) responses were also recorded. Sprint times deteriorated (d = 0.84; P < 0.01) while physiological responses increased (d = 0.91; P < 0.01) as batting duration increased, with longest times and highest responses occurring in the final stage. Prolonged batting had a large effect on executive task performance (d = 0.85; P = 0.03), and moderate effects on visual attention and vigilance (d = 0.56; P = 0.21) and attention and working memory (d = 0.61; P = 0.11), reducing task performance after 30 overs. Therefore, prolonged batting with repeated shuttle running fatigues amateur batters and adversely affects higher-order cognitive function. This will affect decision-making, response selection, response execution and other batting-related executive processes. We recommend that training should incorporate greater proportions of centre-wicket batting with repeated, high-intensity shuttle running. This will improve batting-related skills and information processing when fatigued, making practice more representative of competition.  相似文献   

18.
Differences in interceptive skill between highly skilled and lesser skilled cricket batsmen were examined using a batting task that required participants to strike front-foot drive strokes from a machine-projected ball to a specified target. Task difficulty was manipulated by varying the width of the bat (normal, half, and third width) and target accuracy, and quality of bat-ball contact was monitored along with temporal and sequential elements of the hitting action. Analyses revealed that the highly skilled batsmen were distinguishable from less skilled counterparts by their higher accuracy under the normal and half-width bat conditions, significantly earlier initiation and completion of the front-foot stride, greater synchronization of the completion of the front-foot stride with the commencement of the downswing of the bat, and consistent timing of downswing relative to ball bounce and impact. In keeping with studies of other hitting sports, temporal and spatial coupling of the downswing to ball bounce to help minimize temporo-spatial error at the point of interception appeared critical to skilled performance. Implications for the understanding of interception and for coaching practice are briefly discussed.  相似文献   

19.
Abstract

A simulated cricket batting innings was developed to replicate the physical demands of scoring a century during One-Day International cricket. The simulated innings requires running-between-the-wickets across six 5-over stages, each of 21 min duration. To validate whether the simulated batting innings is reflective of One-Day International batting, movement patterns were collected using a global positioning system (GPS) and compared with previous research. In addition, indicators of physical strain were recorded (heart rate, jump heights, sweat loss, tympanic temperature). Nine club cricketers (mean ± s: age 20 ± 3 years; body mass 79.5 ± 7.9 kg) performed the simulated innings outdoors. There was a moderate trend for distance covered in the simulated innings to be less than that during One-Day batting (2171 ± 157 vs. 2476 ± 631 m · h?1; effect size = 0.78). This difference was largely explained by a strong trend for less distance covered walking in the simulated innings than in One-Day batting (1359 ± 157 vs. 1604 ± 438 m · h?1; effect size = 1.61). However, there was a marked trend for distance covered both striding and sprinting to be greater in the simulated innings than in One-Day batting (effect size > 1.2). Practically, the simulated batting innings may be used for match-realistic physical training and as a research protocol to assess the demands of prolonged, high-intensity cricket batting.  相似文献   

20.
Abstract

This study assessed the reliability and validity of segment measured accelerations in comparison to front foot contact (FFC) ground reaction force (GRF) during the delivery stride for cricket pace bowlers. Eleven recreational bowlers completed a 30-delivery bowling spell. Trunk- and tibia-mounted inertial measurement units (IMUs) were used to measure accelerations, converted to force, for comparisons to force plate GRF discrete measures. These measures included peak force, impulse and the continuous force–time curve in the vertical and braking (horizontal) planes. Reliability and validity was determined by intra-class correlation coefficients (ICC), coefficient of variation (CV), Bland–Altman plots, paired sample t-tests, Pearson’s correlation and one-dimensional (1D) statistical parametrical mapping (SPM). All ICC (0.90–0.98) and CV (4.23–7.41%) were acceptable, except for tibia-mounted IMU braking peak force (CV = 12.44%) and impulse (CV = 18.17%) and trunk vertical impulse (CV = 17.93%). Bland–Altman plots revealed wide limits of agreement between discrete IMU force signatures and force plate GRF. The 1D SPM outlined numerous significant (p < 0.01) differences between trunk- and tibia-located IMU-derived measures and force plate GRF traces in vertical and braking (horizontal) planes. The trunk- and tibia-mounted IMUs appeared to not represent the GRF experienced during pace bowling FFC when compared to a gold-standard force plate.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号