首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 62 毫秒
1.
鲍敏 《中国科技信息》2004,(24):99-99,96
高压电机的起动一直是衡量电机性能的一个重要指标。本文简述了高压电机传统起动方式的不足,指出了软起动方式的优越性,并针对最新的电子软起动技术,阐述了其基本工作原理,并列举了应用范畴。  相似文献   

2.
探讨了进行电机综合检验的重要意义,阐述了三相交流高压电机的工作原理及基本结构,分析了交流高压电机与普通电机间的显著差异,对三相交流高压电机检验技术进行了深入探讨。  相似文献   

3.
郭德刚  樊晶 《内江科技》2011,32(10):115-116
本文介绍了HXD3型电力机车用SEA-107型三相鼠笼式感应电机的技术参数、基本结构和特性,并结合该电机的特征阐述了牵引电机设计参数的特点及选取要点  相似文献   

4.
为了提高感应电机的运行性能,研完了一种具有内外双转子的新型结构的感应电机。电机采用励磁电抗较大的特殊铁芯和跑道型绕组形式。理论分析了电机内电磁场分析,推导了电机的数学模型。然后利用Maxwell 2D,计算了其内部的电磁场,验证了理论分析的正确性,为双转子感应电机的设计提供了一定的依据。  相似文献   

5.
讨论了电机温度日常管理与维护,对电机温度进行了统计,绘制了趋势图,使用统计方法验证了环境温度变化对电机温度的影响关系,预测了维护时间,提出了维护策略,对于减少电机温度过高造成的事故风险有较大帮助。  相似文献   

6.
冯马才 《中国科技信息》2005,(14):149-149,140
本文从交流变频调速电机的控制方式入手,阐述了交流变频调速电机原理,并具体分析了交流变频调速电机的设计特点。  相似文献   

7.
步进电机     
本文阐述了步进电机的工作原理,并对其基本结构及驱动电源做了介绍,说明了步进电机的实用性。  相似文献   

8.
简要介绍绕线电机常用起动方法存在的缺点,详细阐述了无刷自控电机软起动器的原理、结构特点,说明无刷自控电机软起动器代替其它电机起动装置是自动化发展的必然产物。  相似文献   

9.
电机驱动系统可谓是电动汽车的“心脏”。作为电机行业的细分领域,电动汽车驱动电机是一个小行业。日益高涨的电动汽车热,把驱动电机等关键零部件推向了市场前端。驱动电机业受到了前所未有的关注。  相似文献   

10.
《电机与拖动》是电气工程及其自动化专业的一门重要的技术基础课,现结合我校的办学定位,浅谈如何让学生通过本课程的学习,能够掌握电机的基本理论和基本分析法,为今后从事其相关工作打好基础。  相似文献   

11.
以固高科技有限公司型号为GT-WH-L的巷道式堆垛机为设计基础,对单立柱巷道式堆垛机的提升机构进行结构设计与分析,重点对立柱,电动机,及链轮链条进行了选择分析,最后完成提升机构的装配。  相似文献   

12.
田伟 《大众科技》2012,(9):80-81,73
变频调速技术就是这样通过改变电动机的供电电源频率,从而实现速度调节的,是一种理想的高效率、高性能的调速手段。  相似文献   

13.
抽油机是石油开采中必须使用的设备,而电动机又是抽油机不可或缺的重要部分。根据电机在油田生产中的使用情况,采用无线电机群控系统方案,用于监测、保护和控制电机。本文对智能电机监控器的基本功能如电机参数的采集、电机保护、输出控制、数据传输等电路的设计原理和控制软件设计方法作了详细的阐述和认真的研究。  相似文献   

14.
目前,我国电动机总装机容量达4.5亿千瓦,电动机总装机容量占目前总用电量的70%以上,其中近70%的电机拖动的负载是风机、泵类、压缩机等,而其中又有近70%的电机适合进行调速,即有约两亿千瓦的电机处在浪费运行的状态。因此如何实现电动机节能就显得非常重要。文章根据目前应用比较广泛的交流电动机,简单地介绍它的特点,结合以往的调速方式以及各自调速方式的优劣性,分析为什么要采用变频调速,而且如何实现变频调速,以及采用变频调速以后节能的效果。  相似文献   

15.
阐述了单片机通过PID和PWM技术实现对角度传感器的控制过程和编程要点,给出了系统的组成框图,分析了单片机实现PWM控制技术的设计方法和PID算法原理,并给出了由PWM信号驱动直流电机的一般设计方法。  相似文献   

16.
定子绕组故障是异步电动机在运行过程中出现的主要故障,为了保障电动机的安全运行,对异步电动机进行状态监测与早期诊断是很有必要的。关于异步电动机定子绕组状态监测与故障诊断的方法,主要分为两类:第一类是基于模型的故障识别方法;第二类是基于信号检测的诊断方法。  相似文献   

17.
In this paper, speed control, torque ripple minimization and Power Factor Correction (PFC) of a Canonical Switching Cell (CSC) with Sinusoidal and Space Vector Pulse Width Modulated (SVPWM) sensorless Permanent Magnet Brushless DC (PMBLDC) motor drive system with varying load is discussed. The constant speed of operation with minimum torque ripples and Unity Power Factor (UPF) operation during transient state is the most difficult control part in the motor drive system. At the starting condition, the current is too high due to the absence of back EMF and therefore the motor will start with high torque ripples. In order to eliminate these torque ripples during starting condition by limiting the starting current of the motor, it is necessary to have properly designed Canonical Switching Cell (CSC) converter and an intelligent controller, which will improve the power factor of the supply system and reliability of the PMBLDC motor drive. Here, the speed control, torque ripple minimization and power factor correction of a sensorless PMBLDC motor during starting and running condition with conventional and fuzzy logic controllers are proposed. The performance parameters of a PMBLDC motor with these controllers is analyzed through MATLAB/Simulink software.  相似文献   

18.
光电式直流电机的运行速度控制精度高、误差较小。其产生的电磁干扰无法传递到控制系统中,使电机运行更加稳定,因此研究光电式直流电机的意义非常重大。本文介绍了光电耦合器的原理及作用、直流电机的工作原理以及测量光电式直流电机速度的方法及并分析总结影响电机速度的主要因素。  相似文献   

19.
In the electric driving system, the measurement of the motor speed error becomes more and more important, which has an impact on the system vibration suppression. In this paper, based on the single-neuron adaptive PID control method, the dual-inertia system considering gear friction torque is modeled and studied. Firstly, the dual-inertia system with gear friction is established, and dynamic differential equations of it are derived; Then, the comprehensive meshing stiffness and the time-varying friction torque of the gear system are deduced; Next, the Ziegler-Nichlos frequency domain response method is adopted to obtain the parameters of the PID controller. The control methods including the PID, Fuzzy-PID with DOB and single-neuron adaptive PID are utilized to adjust the motor speed of the system; Finally, the effects of gear friction, the moment of inertia of load and control methods on motor speed and system error are analyzed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号