首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 265 毫秒
1.
The issue of finite-time sliding mode control (SMC) is studied for a class of Markov jump systems, in which parameter uncertainties, external disturbances and time-varying delay are considered. Firstly, a suitable observer-based SMC law is devised so that state trajectory of the system can reach the designed sliding mode surface in finite-time, the gain of the controller is asynchronous to the mode of original system. Meanwhile, the sufficient conditions of finite-time boundedness in the sliding phase and reaching phase are derived by the time partition strategy. Moreover, the gains of the observer and the observer-based controller will be acquired by using the linear matrix inequalities tool. In fine, emulation products are used to confirm the merits of the SMC strategy.  相似文献   

2.
This paper is concerned with an event-triggered sliding mode control (SMC) scheme for trajectory tracking in autonomous surface vehicles (ASVs). First, an event-triggered variable that consists of tracking error, desired trajectory and exogenous input of the reference system is introduced to decrease the magnitude of the robust SMC term. Then, the reaching conditions of the designed event-triggered sliding mode are established. Moreover, the event-triggered induced errors that exist in the rotation matrix of the ASV are analyzed. In the presence of parameter uncertainties and external disturbances, the proposed event-triggered SMC scheme can ensure the control accuracy and low-frequency actuator updates. Then both actuator wear and energy consumption of the actuators can be reduced comparing with the traditional time-triggered controller. The proposed controller not only guarantees uniform ultimate boundedness of the tracking error but also ensures non-accumulation of inter-execution times. The results are illustrated through simulation examples.  相似文献   

3.
This paper is concerned with the robust sliding mode control (SMC) problem for a class of uncertain discrete-time Markovian jump systems with mixed delays. The mixed delays consist of both the discrete time-varying delays and the infinite distributed delays. The purpose of the addressed problem is to design a sliding mode controller such that, in the simultaneous presence of parameter uncertainties, Markovian jumping parameters and mixed time-delays, the state trajectories are driven onto the pre-defined sliding surface and the resulting sliding mode dynamics is stochastically stable in the mean-square sense. A discrete-time sliding surface is firstly constructed and an SMC law is synthesized to ensure the reaching condition. Moreover, by constructing a new Lyapunov–Krasovskii functional and employing the delay-fractioning approach, a sufficient condition is established to guarantee the stochastic stability of the sliding mode dynamics. Such a condition is characterized in terms of a set of matrix inequalities that can be easily solved by using the semi-definite programming method. A simulation example is given to illustrate the effectiveness and feasibility of the proposed design scheme.  相似文献   

4.
In this paper, a sliding mode controller (SMC) is proposed for control of a wheeled inverted pendulum (WIP) system, which consists of a pendulum and two wheels in parallel. The control objective is to use only one actuator to perform setpoint control of the wheels while balance the pendulum around the upright position, which is an unstable equilibrium. When designing the SMC for the WIP system, various uncertainties are taken into consideration, including matched uncertainties such as the joint friction, and unmatched uncertainties such as the ground friction, payload variation, or road slope. The SMC proposed is capable of handling system uncertainties and applicable to general underactuated systems with or without input coupling. For switching surface design, the selection of the switching surface coefficients is in general a sophisticated design issue because those coefficients are nonaffine in the sliding manifold. In this work, the switching surface design is transformed into a linear controller design, which is simple and systematic. By virtue of the systematic design, various linear control techniques, such as linear quadratic regulator (LQR) or linear matrix inequality (LMI), can be incorporated in the switching surface design to achieve optimality or robustness for the sliding manifold. To further improve the WIP responses, the design of reference signals is addressed. The reference position for the pendulum is adjusted according to the actual equilibrium of the pendulum, which depends on the size of the friction and slope angle of the traveling surface. A smooth reference trajectory for the setpoint of the wheel is applied to avoid abrupt jumps in the system responses, meanwhile the reaching time of the switching surface can be reduced. The effectiveness of the SMC is validated using intensive simulations and experiment testings.  相似文献   

5.
This paper addresses an observer-based sliding mode control (SMC) approach for discrete-time systems with unmatched uncertainties. A modified sliding surface based on disturbance estimation and a sliding mode controller are designed to counteract with the unmatched disturbance. The proposed method exhibits the following three features. First, the hyperplane matrix is designed in a simple way based on the discrete-time Riccati equation. Second, a chattering-free SMC method is utilized. Third, the proposed approach retains the nominal performance of the system. The stability of the overall system is achieved and simulation results are presented to verify the effectiveness of the proposed method.  相似文献   

6.
Non-fragile controller design for discrete descriptor systems   总被引：3，自引：0，他引：3  
  相似文献   

7.
In this work, the problem of non-fragile sliding mode control is investigated for a class of uncertain switched systems with state unavailable. First, a non-fragile sliding mode observer is constructed to estimate the unmeasured state. And then, a state-estimate-based sliding mode controller is designed, in which a weighted sum approach of the input matrices is utilized to obtain a common sliding surface. It is shown that the reachability of the specified sliding surface can be ensured by the present sliding mode controller. Moreover, the exponential stability of the sliding mode dynamics is analyzed by adopting the average dwell time method. Finally, a numerical simulation is given to demonstrate the effectiveness of the results.  相似文献   

8.
This paper deals with the problems of non-fragile robust stochastic stabilization and robust H∞ control for uncertain stochastic nonlinear time-delay systems. The parameter uncertainties are assumed to be time-varying norm-bounded appearing in both state and input matrices. The time-delay is unknown and time-varying with known bounds. The non-fragile robust stochastic stabilization problem is to design a memoryless non-fragile state feedback controller such that the closed-loop system is robustly stochastically stable for all admissible parameter uncertainties. The purpose of robust H∞ control problem, in addition to robust stochastical stability requirement, is to reduce the effect of the disturbance input on the controlled output to a prescribed level. Using the Lyapunov functional method and free-weighting matrices, delay-dependent sufficient conditions for the solvability of these problems are established in terms of linear matrix inequality (LMI). Numerical example is provided to show the effectiveness of the proposed theoretical results.  相似文献   

9.
Conventional Sliding Mode Controllers (SMCs) exhibit a robust performance against matched bounded uncertainties and disturbances by containing them under a fixed controller’s effort. Consequently, the controller is commonly found excessive, leading to chattering and straining the actuator. As a solution, the variable-gain SMCs adapt to the instantaneous system requirements, thus attenuating the aforesaid effects and keeping the SMC’s benefits. However, the reported adaptive laws underlying such behavior commonly require arbitrary design considerations and do not consider practical implementation. Unlikely, in this work, a hysteresis-based adaptability law to drive the sliding variable to a boundary layer around zero is proposed. The sliding boundary—hysteresis’ width—will consistently “bounce” over the sliding variable, trying to shrink against it while preserving the sliding mode. This behavior finds its steady-state once the sliding variable and the sliding boundary’s dynamics are synchronized, with no need of subjective or arbitrary adjustments. The close-loop tuning can be derived from the system’s parameters alone, and its steady-state performance can be quantitatively predicted. Furthermore, a method to adjust the sliding surface parameters according to the system’s desired behavior is provided, all in a closed, analytical way. Finally, the physical actuator limits are taken into account and never exceeded, and the discrete nature of the devices normally used for SMC implementation is incorporated throughout. Two examples are studied to portray the proposal’s advantages.  相似文献   

10.
This paper investigates the problem of sliding mode control (SMC) for discrete-time two-dimensional (2-D) systems subject to external disturbances. Given a 2-D Fornasini–Marchesini (FM) local state space model, attention is focused on designing the 2-D sliding surface and sliding mode controller, which guarantees the resultant closed-loop system to be asymptotically stable. Particularly, this problem is solved using the model transformation based method. First of all, sufficient conditions are formulated for the existence of a linear sliding surface guaranteeing the asymptotic stability of the equivalent sliding mode dynamics. Based on this, a sliding mode controller is synthesized to ensure that the associated 2-D FM system satisfies the reaching condition. The efficiency of the proposed 2-D SMC law design is shown by a numerical example. This paper extends the idea of model transformation to the 2-D systems and solves the SMC problem of a more general 2-D model in FM type for the first time.  相似文献   

11.
In this work, we developed a novel active fault-tolerant control (FTC) design scheme for a class of nonlinear dynamic systems subjected simultaneously to modelling imperfections, parametric uncertainties and sensor faults. Modelling imperfections and parametric uncertainties are dealt with using an adaptive radial basis function neural network (RBFNN) that estimates the uncertain part of the system dynamics. For sensor fault estimation (FE), a nonlinear observer based on the estimated dynamics is designed. A scheme to estimate sensor faults in real-time using the nonlinear observer and an additional RBFNN is developed. The convergence properties of the RBFNN, used in the fault FE part, are improved by using a sliding surface function. For FTC design, a sliding surface is designed that incorporates the real-time sensor FE. The resulting sliding mode control (SMC) technique-based FTC law uses the estimated dynamics and real-time sensor FE. A double power-reaching law is adopted to design the switching part of the control law to improve the convergence and mitigate the chattering associated with the SMC. The FTC works well in the presence and absence of sensor faults without the requirement for controller reconfiguration. The stability of the proposed active FTC law is proved using the Lyapunov method. The developed scheme is implemented on a nonlinear simulation of an unmanned aerial vehicle (UAV). The results show good performance of the proposed unified FE and the FTC framework.  相似文献   

12.
This paper deals with the problem of non-fragile guaranteed cost control for a class of uncertain stochastic nonlinear time-delay systems. The parametric uncertainties are assumed to be time-varying and norm bounded. The time-delay factors are unknown and time-varying with known bounds. The aim of this paper is to design a memoryless non-fragile state feedback control law such that the closed-loop system is stochastically asymptotically stable in the mean square for all admissible parameter uncertainties and the closed-loop cost function value is not more than a specified upper bound. A new sufficient condition for the existence of such controllers is presented based on the linear matrix inequality (LMI) approach. Then, a convex optimization problem is formulated to select the optimal guaranteed cost controller which minimizes the upper bound of the closed-loop cost function. Numerical example is given to illustrate the effectiveness of the developed techniques.  相似文献   

13.
In this paper a sliding mode position control for high-performance real-time applications of induction motors is developed. The design also incorporates a sliding mode rotor flux estimator in order to avoid the flux sensors. The proposed control scheme presents a low computational cost and therefore can be implemented easily in a real-time applications using a low cost Digital Signal Processor (DSP). The stability analysis of the observer and the controller, under parameter uncertainties and load torque disturbances, is provided using the Lyapunov stability theory. Finally simulated and experimental results show that the proposed controller with the proposed observer provides a good trajectory tracking and that this scheme is robust with respect to plant parameter variations and external load disturbances.  相似文献   

14.
The control problem of the cooperative motion of a two-link dual arm robot during handling and transportation of an object was studied in this paper. Since these types of robots are frequently preferred for hazardous applications such as transportation of radioactive materials and disposal of explosives, a robust non-chattering sliding mode controller (SMC) improved by a multiple-input multiple-output (MIMO) fuzzy logic unit was applied to the robot to track the desired trajectory with high accuracy and transport the load safely. In order to assess the performance of the proposed MIMO fuzzy sliding mode controller (MIMO-FSMC) in presence of parameter variations and external disturbances, a sudden load variation and noise were introduced to the robot system. If compared with classical SMC, tracking errors with smaller magnitudes and faster convergence to zero were obtained by using the proposed MIMO-FSMC. Numerical results suggest that this type of control method may safely be used for cooperative motion control of dual arm robots in load handling and transport applications in hazardous environments with high accuracy.  相似文献   

15.
This paper investigates a composite controller for load frequency control (LFC) in multi-region interconnected power systems via sliding mode observer design. State observers (SOs) and disturbance observers (DOs) are implied for the LFC based on the load variations with communication delays and quantization output measurements. A nonlinear integral sliding surface combined with a composite controller is developed to optimize control performance. Moreover, a three-area power system model is used to demonstrate the effectiveness of the proposed scheme in the illustrative example, confirming that frequency deviations can be rejected despite delays, uncertainties, and quantization during transmission.  相似文献   

16.
This paper investigates the non-fragile control for positive Markovian jump systems both in continuous-time and discrete-time cases with actuator uncertainty. It is assumed that the coefficient matrices of the non-fragile controller is unknown and bounded. The state-feedback controller gain consists of nominal controller gain and gain perturbation. First, a set of state-feedback controllers for the considered system are designed by using a stochastic co-positive Lyapunov function integrated with linear programming approach. Under the designed controllers, the resulting closed-loop systems are positive and stochastically stable. Then, the proposed controller design approach is extended to discrete-time systems. Through comparisons, it is shown that existing results are special cases of the presented ones in the paper. Finally, two examples are given to illustrate the effectiveness of the proposed design.  相似文献   

17.
This paper considers the problem of sliding mode control for discrete-time stochastic systems with parameter uncertainties and state-dependent noise perturbation. An integral-like sliding surface is chosen and a discrete-time sliding mode controller is designed. The key feature in this work is that both the reachability of the quasi-sliding mode and the stability of system states are simultaneously analyzed, due to the existence of state-dependent noise perturbation. By utilizing an Lyapunov function involving system states and sliding mode variables, the sufficient condition for reachability is obtained. Finally, numerical simulation results are provided.  相似文献   

18.
This article is concerned with the non-fragile sampled-data control for T-S fuzzy system with parameter uncertainties. Firstly, a novel augmented Lyapunov-Krasovskii functional with sufficient sampled-data information is constructed. And a novel h(t)-depended exponential stability criterion with H∞ performance is gotten by reciprocally convex matrix inequality. Beyond that, compared with the existing methods, the gain matrices for non-fragile sampled-data controller expected are less conservative by linear matrix inequality technique. And numerical examples are provided to support the viability and validity of the results.  相似文献   

19.
The design of an adaptive sliding mode control (SMC) scheme is proposed in this paper for stabilizing a class of dynamic systems with matched and mismatched perturbations. Two methods for designing a novel sliding surface function are introduced first. By utilizing a pseudocontrol input in the sliding surface function, one cannot only suppress the mismatched perturbations in the sliding mode, but also obtain the property of asymptotical stability. Then a sliding mode controller is designed to drive the controlled systems to the designated sliding surface in a finite time. Adaptive mechanism is also embedded in the controller as well as in the sliding surface function designed from the second method to overcome the perturbations, so that the informations of upper bound of perturbations are not required. An application of flight control and experimental results of controlling a servomotor are also given for demonstrating the applicability of the proposed control scheme.  相似文献   

20.
Multiplex networks involve different types of synchronization due to their complex spatial structure. How to control multiplex networks to achieve different types of synchronization is an interesting topic. This paper considers the fixed-time synchronization of multiplex networks under sliding mode control (SMC). Firstly, for realizing three types of synchronization of multiplex networks in a fixed time, a unified sliding mode surface (SMS) is established. After that, based on the theory of SMC, a sliding mode controller (SMCr) which is more intelligent and has a simpler form than those in the existing literature is put forward for multiplex networks. It can not only guarantee the emergence of sliding mode motion, but also can realize three different kinds of synchronization by adjusting some parameters or even one parameter of the controller. Based on some theories of fixed-time stability, this paper deduces several sufficient conditions for the trajectories of the system to reach the preset SMS in a fixed time, and derives some sufficient conditions for multiplex networks to realize three different types of fixed-time synchronization. At the same time, the settling time which can reveal what factors determine the fixed-time synchronization in multiplex networks is obtained. Finally, in numerical simulations, different chaotic systems are set for each layer of multiplex networks to represent the nodes of different layers, which can prove that the theoretical results are practical and effective.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号