共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
计量工作对于我们的生活影响非常大,做好计量检定与校准具有非常重要的意义。本文分析了计量检定与校准的内涵及现状,并对计量检定与校准的发展趋势与方向做出了探讨与总结,希望给这方面的工作起到一地的指导作用。 相似文献
3.
黑体空腔式钢水连续测温仪的准确性对钢铁制造业测量影响重大,建立一套完善的校准方法,定期开展对黑体空腔式钢水连续测温仪进行校准是计量检测工作的当务之急。通过长期的实践摸索,我们对各种黑体空腔式钢水连续测温仪进行了系统的测试和论证,初步建立了一套可靠的校准方法。该方法科学合理,简便易行,各项指标评价结果符合仪器的设计性能及实际测试工作要求,对钢铁制造业及法定计量检定机构开展黑体空腔式钢水连续测温仪的校准工作有一定的指导意义。 相似文献
4.
5.
6.
7.
婴儿培养箱校准方法的探讨 总被引:1,自引:0,他引:1
婴儿培养箱的准确性对医院诊断治疗影响重大,建立一套完善的校准方法,定期开展对婴儿培养箱机进行校准是临床工作的当务之急。通过长期的实践摸索,我们对各种婴儿培养箱进行了系统的测试和论证,初步建立了一套可靠的校准方法。该方法科学合理,简便易行,各项指标评价结果符合仪器的设计性能及实际测试工作要求,对医学临床及法定计量检定机构开展婴儿培养箱的校准工作有一定的指导意义。 相似文献
8.
随着改革开放的不断深入和市场经济的快速发展,计量检定与计量校准已成为我国计量技术机构进行量值传递和溯源的主要途径,只有正确理解计量检定和计量校准活动,正确编制、执行检定规程和校准规范,才能够真正满足客户需求、保证量值统一。 相似文献
9.
10.
检定和校准是实施量值溯源性的重要方法和手段,本文从量值传递与量值溯源的含义、关系、必要性及量值溯源和检定的实施四个方面阐述了量值溯源与检定。华北油田授权计量站采用计量检定、校准、比对等方法为企业提供计量数据及技术服务。 相似文献
11.
无创血压监测仪的准确性对医疗诊断影响重大,目前我国暂无校准方法,本文采用检测装置对市场上的无创血压监测仪进行了测量分析,提出了一套检测方法,为临床监护及法定计量机构开展无创血压测量仪的检测工作提供了一定的理论依据。 相似文献
12.
Junchao Wang Kaicong Liang Naiyin Zhang Hailong Yao Tsung-Yi Ho Lingling Sun 《Biomicrofluidics》2021,15(2)
With the development of 3D printing techniques, the application of it in microfluidic/Lab-on-a-Chip (LoC) fabrication is becoming more and more attractive. However, to achieve a satisfying printing quality of the target devices, researchers usually require quite an amount of work in calibration trials even for high-end 3D printers. To increase the calibration efficiency of the average priced printers and promote the application of 3D printing technology in the microfluidic community, this work has presented a computer vision (CV)-based method for rapid and precise 3D printing calibration with examples on cylindrical hole/post diameters of 0.2–2.4 mm and rectangular hole/post widths of 0.2–1.0 mm by a stereolithography-based 3D printer. Our method is fully automated, which contains five steps and only needs a camera at hand to provide photos for convolutional neural network recognition. The experimental results showed that our CV-based method could provide calibrated dimensions with just one print of the specific calibration ruler to meet user desire. The higher resolution of the photo provides a higher precision in calibration. Subsequently, only one more print for the target device is needed after the calibration process. Overall, this work has provided a quick and precise calibration tool for researchers to apply 3D printing in the fabrication of their microfluidic/LoC devices with average price printers. Besides, with our open source calibration software and calibration ruler design file, researchers can modify the specific setting based on customized needs and conduct calibration on any type of 3D printer. 相似文献
13.
郑伟 《科技成果管理与研究》2008,(12):94-98
EGR成为降低发动机NOx排放的最有效方式之一,但标定其再循环量的重要参数EGR率的标定方法却有非常多种。针对这种情况,进行了柴油机在同等EGR率数值下的不同EGR率标定方法的柴油机工作特性的对比研究。研究结果发现,不同EGR率标定方法下,柴油机工作参数的变化趋势是一致的,区别在于标方法不同时,对工作参数的影响程度不同。 相似文献
14.
提出一种利用条带间连接点进行多条带干涉定标的方法.该方法利用条带间重叠区的连接点作为控制点,既实现了多条带数据的干涉定标,又有效减少了地面控制点数量.实验结果表明,该方法可以准确获取各条带的干涉定标参数,并能解决实际应用中大量布设地面控制点的问题,降低了外定标工作的困难. 相似文献
15.
设计了一种对Gen2 RFID标签的振荡器频率进行校准的方法. 该方法设计了时钟校准命令; 并给出了读写器使用时钟校准命令对标签时钟频率进行逐次逼近的校准过程. 验证结果表明,带有8位校准寄存器的电路可以把时钟偏差从50%校准到0.4%以内. 相似文献
16.
摄像机标定精度的比较研究 总被引:1,自引:0,他引:1
本文针对摄像机标定精度,对三种经典标定方法进行了对比研究,阐述了各种标定方法的优缺点,指出了各种标定方法的适用场合。仿真实验结果验证了三种标定方法在图像坐标噪声、世界坐标噪声、图像数据数量三方面对标定误差的影响,这对研究摄像机标定精度和应用具有一定的参考意义。 相似文献
17.
Steen Krenk 《Journal of The Franklin Institute》2019,356(14):7704-7730
The paper presents an explicit two-step calibration procedure for tuned inerter based vibration absorbers on flexible structures. It makes use of a local approximate representation of the structural response to the device force, in which the contribution of the non-resonant modes is represented approximately around the resonance frequency by a background flexibility and a background inertia term. The calibration procedure then consists of two steps. The first step calibrates an equivalent vibration absorber including the background terms, and the second step subsequently evaluates the parameters of the actual device by extracting the background flexibility and inertia parameters. The first step represents the classic idealized single degree of freedom representation of the structure, whereas the second step leads to an increase of stiffness, inertia and damping parameters of the actual device due to background flexibility of the structure. The procedure is illustrated in detail for three inerter based vibration absorbers: parallel coupling of damper and stiffness, parallel coupling of damper and inerter, and finally a device with two dampers in parallel with stiffness and inerter elements, respectively. Explicit expressions for the calibration are obtained for each device, and it is demonstrated that the procedure leads to a balanced plateau of amplification around the resonance frequency of the magnitude assumed as the basis for the device parameter calibration. 相似文献
18.
在深入计量校准机构进行调查和分析现有远程校准系统的基础上,设计了一种普遍通用的远程校准系统。该校准系统投入较少,适应能力强,能提高校准机构的工作效率,为各企事业单位的器具送检节省了大量的时间。 相似文献
19.
摄像机标定是计算机视觉技术的重要研究内容,本文基于HALCON软件对单摄像机的标定方法进行了研究.文中首先对摄像机模型作了简要的介绍,然后详细阐述了HALCON软件中关于摄像机标定的一些函数,最后给出了示例程序. 相似文献
20.
本文主要阐述了关于数字示波器自动校准的总体方案;从软件整体结构与各个功能模块以及校准过程等方面完整的介绍了该系统。该校准系统基于GPIB接口,实现了大部分数字示波器的自动校准,并且能够完成数据的存储以及运算,自动生成记录报告等功能。 相似文献