首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 351 毫秒
1.
The purpose of fault diagnosis of stochastic distribution control (SDC) systems is to use the measured input and the system output probability density functions (PDFs) to obtain the fault information of the SDC system. When the target PDF is known, the purpose of fault tolerant control of stochastic distribution control system is to make the output PDF still track the given distribution using the fault tolerant controller. However, in practice, time delay may exist in the data (or image) processing, the modeling and transmission phases. When time delay is not considered, the effectiveness of the fault detection, diagnosis and fault tolerant control of stochastic distribution systems will be reduced. In this paper, the rational square-root B-spline is used to approach the output probability density function. In order to diagnose the fault in the dynamic part of such systems, it is then followed by the novel design of a nonlinear neural network observer-based fault diagnosis algorithm. The time delay term will be deleted in the stability proof of the observation error dynamic system. Based on the fault diagnosis information, a new fault tolerant controller based on PI tracking control is designed to make the post-fault probability density function still track the given distribution, which is dependent of the time delay term. Finally, simulations for the particle distribution control problem are given to show the effectiveness of the proposed approach.  相似文献   

2.
针对几类重要的随机非线性系统, 提出了一些新的概念,发展了一些基本分析工具, 研究了几类控制器的设计问题. 主要成果包括:(1) 针对一类部分动态不可量测的非线性随机系统,引入了随机输入状态稳定(SISS)的概念, 借助于分析概率理论,发展了随机系统改变能量函数方法, 成功地处理了随机微分中的伊藤项,给出了随机非线性串联系统SISS的小增益类条件. (2) 对一类具有SISS随机逆动态的大规模随机非线性系统,给出了分散自适应输出反馈镇定控制器的构造性设计方法. 既解决了实用镇定问题也解决了渐近镇定问题. 在分散控制框架内,给出了处理随机非线性逆动 态的方法. (3) 对一类具有不稳定零动态的随机非线性系统,引入了随机输入状态可镇定的概念,给出了全局输出反馈镇定控制器构造性设计方法. (4) 对一类具有线性增长的不可量测状态的随机非线性系统,针对方差未知的噪声和一般随机输入,引入了广义随机输入状态稳定(GSISS)的概念,分别给出了随机干扰抑制和渐近镇定的输出反馈控制器的构造性设计方法.(5) 对一般的时滞随机非线性系统, 给出了解存在唯一的判定条件,引入了依概率全局(渐近)稳定的概念及相应的判定准则,丰富了随机时滞非线性系统的控制器设计理论. 对一类不确定随机时变时滞系统,构造性地设计出了自适应输出反馈镇定控制器.  相似文献   

3.
A fault tolerant control scheme for actuator and sensor faults is proposed for a tilt-rotor unmanned aerial vehicle (UAV) system. The tilt-rotor UAV has a vertically take-off and landing (VTOL) capability like a helicopter during the take-off & landing while it could cruise with a high speed as a conventional airplane flight mode. A dual system in the flight control computer (FCC) and the sensor is proposed in this study. To achieve a high reliability, a fault tolerant flight control system is required for the case of actuator or sensor fault. For the actuator fault, the fault tolerant control scheme based on model error control synthesis is presented. A designed fault tolerant control scheme does not require system identification process and it provides an effective reconfigurability without fault detection and isolation (FDI) process. For the sensor fault, the fault tolerant federated Kalman filter is designed for the tilt-rotor UAV system. An FDI algorithm is applied to the federated Kalman filter in order to improve the accuracy of the state estimation even when the sensor fails. For a linearized six-degree-of-freedom linear model and nonlinear model of the tilt-rotor UAV, numerical simulation and process-in-the-loop simulation (PILS) are performed to demonstrate the performance of the proposed fault tolerant control scheme.  相似文献   

4.
In this paper, a robust actuator fault diagnosis scheme is investigated for satellite attitude control systems subject to model uncertainties, space disturbance torques and gyro drifts. A nonlinear unknown input observer is designed to detect the occurrence of any actuator fault. Subsequently, a bank of adaptive unknown input observers activated by the detection results are designed to isolate which actuator is faulty and then estimate of the fault parameter. Fault isolation is achieved based on the well known generalized observer strategy. The simulation on a closed-loop satellite control system with time-varying or constant actuator faults in the form of additive and multiplicative unknown dynamics demonstrates the effectiveness of the proposed robust fault diagnosis strategy.  相似文献   

5.
  相似文献   

6.
In this paper, the problem of active fault tolerant control for a reusable launch vehicle (RLV) with actuator fault using both adaptive and sliding mode techniques is investigated. Firstly, the kinematic equations and dynamic equations of RLV are given, which represent the characteristics of RLV in reentry flight phase. For the dynamic model of RLV in faulty case, a fault detection scheme is proposed by designing a nonlinear fault detection observer. Then, an active fault tolerant tracking strategy for RLV attitude control systems is presented by making use of both adaptive control and sliding mode control techniques, which can guarantee the asymptotic output tracking of the closed-loop attitude control systems in spite of actuator fault. Finally, simulation results are given to demonstrate the effectiveness of the developed fault tolerant control scheme.  相似文献   

7.
In this paper, an adaptive output feedback fault tolerant control (FTC) based on actuator switching is proposed for a class of single-input single-output (SISO) nonlinear systems with uncertain parameters and possible actuator failures, for which a set of healthy actuators are available as backups. While high-gain K-filters are utilized to estimate the unmeasured states, an adaptive control law is designed to compensate for the parameter uncertainties and certain actuator failures, an actuator switching strategy based on a set of appropriately designed monitoring functions (MFs) is proposed to tackle those serious actuator failures, make tracking error satisfy prescribed transient and steady-state performance and guarantee closed-loop signal boundedness.  相似文献   

8.
In this paper, a composite fault tolerant control (CFTC) with disturbance observer scheme is considered for a class of stochastic systems with faults and multiple disturbances. The disturbances are divided into two parts. One represents the stochastic disturbance with partial known information which is formulated by an exogenous system. The other is independent Wiener process. A stochastic disturbance observer is designed to estimate exogenous disturbance. To make the first type of disturbance can be rejected and the fault can be diagnosed, a composite fault diagnosis observer with disturbance observer is constructed. Furthermore, a composite fault-tolerant controller is proposed to compensate disturbances and faults. Finally, simulation examples are given to demonstrate the feasibility and effectiveness of the proposed scheme.  相似文献   

9.
The focus of this paper is on the detection and estimation of parameter faults in nonlinear systems with nonlinear fault distribution functions. The novelty of this contribution is that it handles the nonlinear fault distribution function; since such a fault distribution function depends not only on the inputs and outputs of the system but also on unmeasured states, it causes additional complexity in fault estimation. The proposed detection and estimation tool is based on the adaptive observer technique. Under the Lipschitz condition, a fault detection observer and adaptive diagnosis observer are proposed. Then, relaxation of the Lipschitz requirement is proposed and the necessary modification to the diagnostic tool is presented. Finally, the example of a one-wheel model with lumped friction is presented to illustrate the applicability of the proposed diagnosis method.  相似文献   

10.
The main contribution of this paper is to develop an adaptive output-feedback control approach for a class of uncertain nonlinear systems with unknown time-varying delays in the pure-feedback form. Both the non-affine nonlinear functions and the unknown time-varying delayed functions related to all state variables are considered. These conditions make the controller design difficult and challenging because the output-feedback controller should be designed using only the output information. In order to overcome these conditions, we design an observer-based adaptive dynamic surface controller where the time-delay effects are compensated by using appropriate Lyapunov–Krasovskii functionals and the function approximation technique using neural networks. A first-order filter is added to the control input to avoid the algebraic loop problem caused by the non-affine structure. It is proved that all the signals in the closed-loop system are semi-globally uniformly bounded and the tracking error converges to an adjustable neighborhood of the origin.  相似文献   

11.
In this paper, a decentralized adaptive backstepping control scheme is proposed for a class of interconnected systems with nonlinear multisource disturbances and actuator faults. The nonlinear multisource disturbances comprise of two parts: one is the time-varying parameterized uncertainty; the other is the dynamic unexpected signal formulated by a nonlinear exogenous system. For each subsystem, the disturbances are compensated by an adaptive controller based on several dynamic signals and the bound estimation approach. Moreover, the effect of the actuator faults is tackled in spite of the fact that the faults may change in different cases infinite times. Meanwhile, through several smooth functions, the interactions among the subsystems are successfully disposed. As a result, the tracking errors can converge to an arbitrarily small value by choosing the design parameters appropriately. The proof of the closed-loop system stability is completed. Several illustrative examples are employed to demonstrate the effectiveness of the proposed method.  相似文献   

12.
This paper studies the sampled outputs-based adaptive fault-tolerant control problem for a class of strict-feedback uncertain nonlinear systems, where the nonlinear functions are allowed to include the unmeasured system states. Within the framework, a sampled output observer is introduced to jointly estimate the system states and parameters. By combining the estimated states and the supervisory switching strategy, an adaptive fault-tolerant controller is designed to achieve the desirable tracking performance. By using Lyapunov stability theory, it is proved that all the signals of the closed-loop systems are bounded and the tracking error converges to an adjustable neighbourhood of the origin eventually both in the fault free and faulty cases. Especially, if the outputs are available all the time, the proposed output feedback fault-tolerant control method can ensure the tracking error satisfy the prescribed performance bounds regardless of the faults. Finally, two examples are used to illustrate the effectiveness of the proposed method.  相似文献   

13.
This paper proposes an adaptive data-driven fault-tolerant control scheme using the Koopman operator for unknown dynamics subjected to nonlinearities, time-varying loss of effectiveness, and additive actuator faults. The main objective of this method is to design a virtual actuator to hide actuator faults from the view of the system’s nominal controller without having any prior knowledge about the system’s underlying dynamics. The designed virtual actuator is placed between the faulty plant and the nominal controller of the system to keep the dynamical system’s performance consistent before and after the occurrence of actuator faults. Based on the Koopman operator theory, an equivalent Koopman predictor is first obtained using the process data only, without knowing the governing equations of the underlying dynamics. Koopman operator is an infinite-dimensional, linear operator which takes the nonlinear process data into an infinite-dimensional feature space where the dynamic data correlations have linear behavior. Next, based on the approximated system’s Koopman operator, a virtual actuator is designed and implemented without knowing the system’s nominal controller. Needless to use a separate fault detection, isolation, and identification module to perform fault-tolerant control, the current method leverages the adaptive framework to keep the system’s desired performance in facing time-varying additive and loss of effectiveness actuator faults. Finally, the approach’s efficacy is demonstrated using simulation on a two-link manipulator benchmark, and a comparison study is presented.  相似文献   

14.
This paper presents a novel approach to address the decentralized fault tolerant model predictive control of discrete-time interconnected nonlinear systems. The overall system is composed of a number of discrete-time interconnected nonlinear subsystems at the presence of multiple faults occurring at unknown time-instants. In order to deal with the unknown interconnection effects and changes in model dynamics due to multiple faults, both passive and active fault tolerant control design are considered. In the Active fault tolerant case an online approximation algorithm is applied to estimate the unknown interconnection effects and changes in model dynamics due to multiple faults. Besides, the decentralized control strategy is implemented for each subsystem with the model predictive control algorithm subject to some constraints. It is showed that the proposed method guarantees input-to-state stability characterization for both local subsystems and the global system under some predetermined assumptions. The simulation results are exploited to illustrate the applicability of the proposed method.  相似文献   

15.
In this work, we developed a novel active fault-tolerant control (FTC) design scheme for a class of nonlinear dynamic systems subjected simultaneously to modelling imperfections, parametric uncertainties and sensor faults. Modelling imperfections and parametric uncertainties are dealt with using an adaptive radial basis function neural network (RBFNN) that estimates the uncertain part of the system dynamics. For sensor fault estimation (FE), a nonlinear observer based on the estimated dynamics is designed. A scheme to estimate sensor faults in real-time using the nonlinear observer and an additional RBFNN is developed. The convergence properties of the RBFNN, used in the fault FE part, are improved by using a sliding surface function. For FTC design, a sliding surface is designed that incorporates the real-time sensor FE. The resulting sliding mode control (SMC) technique-based FTC law uses the estimated dynamics and real-time sensor FE. A double power-reaching law is adopted to design the switching part of the control law to improve the convergence and mitigate the chattering associated with the SMC. The FTC works well in the presence and absence of sensor faults without the requirement for controller reconfiguration. The stability of the proposed active FTC law is proved using the Lyapunov method. The developed scheme is implemented on a nonlinear simulation of an unmanned aerial vehicle (UAV). The results show good performance of the proposed unified FE and the FTC framework.  相似文献   

16.
This research addresses the problem of finite-time tracking error constrained control for a class of non-strict stochastic nonlinear systems with unknown time-varying powers and multiple power terms. Based on the conversion from constrained tracking error to an unconstrained signal with the same effect, by adopting the backstepping technique together with adaptive neural network control, a controller with upper and lower time-varying power bounds is designed to meet the prescribed performance control scheme in finite-time. Finally, two simulation examples are shown to verify the effectiveness of the commendatory control method.  相似文献   

17.
This paper presents an active fault tolerant control (FTC) for doubly fed induction generator (DFIG) with actuator fault and disturbance using Takagi–Sugeno (TS) fuzzy model. The control structure has two parts: fault and disturbance estimation part and FTC part. First, a TS fuzzy model is used to describe the DFIG system. Using a special linear transformation, the original system is decoupled into three independent subsystems: state subsystem without fault and disturbance, disturbance subsystem without fault, and fault subsystem without disturbance. By solving linear matrix inequalities (LMIs), a TS fuzzy observer is designed for the state subsystem without fault and disturbance. Second, estimations of faults and disturbance are obtained using the other subsystem models. Third, an active FTC scheme is developed to reduce the effect of disturbance and actuator faults. Finally, the performance of the proposed FTC is tested for a wind turbine system based on DFIG with actuator faults and disturbance. The simulation results demonstrate that the new FTC scheme makes possible to obtain an efficient fault and disturbance estimation and to reduce the peak current in the transient process.  相似文献   

18.
This paper studies the adaptive fuzzy fault-tolerant control design problem for a class of stochastic multi-input and multi-output (MIMO) nonlinear systems in pure-feedback form. The nonlinear systems under study contain unknown functions, unmeasured states and actuator faults, which are described by the loss of effectiveness and lock-in-place modes. With the help of fuzzy logic systems identifying uncertain stochastic nonlinear systems, a fuzzy state observer is established for estimating the unmeasured states. Based on the backstepping design technique with the nonlinear tolerant-fault control theory, an adaptive fuzzy output feedback faults-tolerant control approach is developed. It is proved that the proposed fault-tolerant control approach can guarantee that all the signals of the resulting closed-loop system are bounded in probability. Moreover, the observer errors and tracking errors can be regulated to a small neighborhood of the origin by choosing design parameters appropriately. A simulation example is provided to show the effectiveness of the proposed approach.  相似文献   

19.
This paper develops a high gain observer with multiple sliding modes for simultaneous state and fault estimations for MIMO nonlinear systems. The novelty lies in the observer design that employs the combination of high-gain observer and sliding mode observer. The proposed observer does not impose the small-Lipschitz-constant condition on the system nonlinearity. By imposing a structural assumption on the nonlinear fault distribution matrix, the observability of the faults/unknown inputs w.r.t. the outputs is safeguarded and sliding modes are utilized for their reconstruction. The reconstruction of the faults from the sliding mode only relies on the output estimation error and thus can be implemented online together with the state estimation. Finally, an application to flexible joint robotic arm is used to illustrate the proposed method.  相似文献   

20.
This paper studies the adaptive tracking control problem for a class of uncertain high-order fully actuated (HOFA) systems with actuator faults and full-state constraints. Firstly, we design a novel nonlinear transformation function (NTF) only related to state and constraint boundaries and capable of handling asymmetric time-varying constraints. With the designed function, we obtain an equivalent totally unconstrained HOFA model which is generally simpler to design controllers than first-order state-space model. Then, the adaptive fault-tolerant controller is constructed with the help of the HOFA approach. By applying the Lyapunov stability theory, it is rigorously proved that the output tracking error converges to zero asymptotically, other signals of the resulting closed-loop systems are bounded, and full-state constraints are not violated for all time. Finally, the simulation results verify the efficiency of the proposed control design method.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号