共查询到20条相似文献，搜索用时 31 毫秒
1.
Ronald D. Anderson 《Structural equation modeling》2013,20(3):203-227
McDonald goodness‐of‐fit indices based on maximum likelihood, asymptotic distribution free, and the Satorra‐Bentler scale correction estimation methods are investigated. Sampling experiments are conducted to assess the magnitude of error for each index under variations in distributional misspecification, structural misspecification, and sample size. The Satorra‐Bentler correction‐based index is shown to have the least error under each distributional misspecification level when the model has correct structural specification. The scaled index also performs adequately when there is minor structural misspecification and distributional misspecification. However, when a model has major structural misspecification with distributional misspecification, none of the estimation methods perform adequately. 相似文献
2.
Data collected from questionnaires are often in ordinal scale. Unweighted least squares (ULS), diagonally weighted least squares (DWLS) and normal-theory maximum likelihood (ML) are commonly used methods to fit structural equation models. Consistency of these estimators demands no structural misspecification. In this article, we conduct a simulation study to compare the equation-by-equation polychoric instrumental variable (PIV) estimation with ULS, DWLS, and ML. Accuracy of PIV for the correctly specified model and robustness of PIV for misspecified models are investigated through a confirmatory factor analysis (CFA) model and a structural equation model with ordinal indicators. The effects of sample size and nonnormality of the underlying continuous variables are also examined. The simulation results show that PIV produces robust factor loading estimates in the CFA model and in structural equation models. PIV also produces robust path coefficient estimates in the model where valid instruments are used. However, robustness highly depends on the validity of instruments. 相似文献
3.
Most researchers acknowledge that virtually all structural equation models (SEMs) are approximations due to violating distributional assumptions and structural misspecifications. There is a large literature on the unmet distributional assumptions, but much less on structural misspecifications. In this paper, we examine the robustness to structural misspecification of the model implied instrumental variable, two-stage least square (MIIV-2SLS) estimator of SEMs. We introduce two types of robustness: robust-unchanged and robust-consistent. We develop new robustness analytic conditions for MIIV-2SLS and illustrate these with hypothetical models, simulated data, and an empirical example. Our conditions enable a researcher to know whether, for example, a structural misspecification in the latent variable model influences the MIIV-2SLS estimator for measurement model equations and vice versa. Similarly, we establish robustness conditions for correlated errors. The new robustness conditions provide guidance on the types of structural misspecifications that affect parameter estimates and they assist in diagnosing the source of detected problems with MIIVs. 相似文献
4.
Kamel Jedidi Venkatram Ramaswamy Wayne S. DeSarbo Michel Wedel 《Structural equation modeling》2013,20(3):266-289
We propose a maximum likelihood framework for estimating finite mixtures of multivariate regression and simultaneous equation models with multiple endogenous variables. The proposed “semi‐parametric” approach posits that the sample of endogenous observations arises from a finite mixture of components (or latent‐classes) of unknown proportions with multiple structural relations implied by the specified model for each latent‐class. We devise an Expectation‐Maximization algorithm in a maximum likelihood framework to simultaneously estimate the class proportions, the class‐specific structural parameters, and posterior probabilities of membership of each observation into each latent‐class. The appropriate number of classes can be chosen using various information‐theoretic heuristics. A data set entailing cross‐sectional observations for a diverse sample of businesses is used to illustrate the proposed approach. 相似文献
5.
Although much is known about the performance of recent methods for inference and interval estimation for indirect or mediated effects with observed variables, little is known about their performance in latent variable models. This article presents an extensive Monte Carlo study of 11 different leading or popular methods adapted to structural equation models with latent variables. Manipulated variables included sample size, number of indicators per latent variable, internal consistency per set of indicators, and 16 different path combinations between latent variables. Results indicate that some popular or previously recommended methods, such as the bias-corrected bootstrap and asymptotic standard errors had poorly calibrated Type I error and coverage rates in some conditions. Likelihood-based confidence intervals, the distribution of the product method, and the percentile bootstrap emerged as leading methods for both interval estimation and inference, whereas joint significance tests and the partial posterior method performed well for inference. 相似文献
6.
Mike W.-L. Cheung 《Structural equation modeling》2013,20(1):157-167
Structural equation modeling (SEM) is now a generic modeling framework for many multivariate techniques applied in the social and behavioral sciences. Many statistical models can be considered either as special cases of SEM or as part of the latent variable modeling framework. One popular extension is the use of SEM to conduct linear mixed-effects modeling (LMM) such as cross-sectional multilevel modeling and latent growth modeling. It is well known that LMM can be formulated as structural equation models. However, one main difference between the implementations in SEM and LMM is that maximum likelihood (ML) estimation is usually used in SEM, whereas restricted (or residual) maximum likelihood (REML) estimation is the default method in most LMM packages. This article shows how REML estimation can be implemented in SEM. Two empirical examples on latent growth model and meta-analysis are used to illustrate the procedures implemented in OpenMx. Issues related to implementing REML in SEM are discussed. 相似文献
7.
The effects of misspecifying intercept-covariate interactions in a 4 time-point latent growth model were the focus of this investigation. The investigation was motivated by school growth studies in which students' entry-level skills may affect their rate of growth. We studied the latent interaction of intercept and a covariate in predicting growth with respect to 3 factors: sample size (100, 200, and 500), 4 levels of magnitude of interaction effect, and 3 correlation values between intercept and covariate (.3, .5, and .7). Correctly specified models were examined to determine power and Type I error rates, and misspecified models were examined to evaluate the effects on power, parameter estimation, bias, and fit indexes. Results showed that, under correctly specified models, power increased as expected with increasing sample size, larger magnitude of interaction, and larger intercept-covariate correlation. Under misspecification, omitting a non-null interaction results in significant change in the estimation of the direct effects of both covariate and intercept in both magnitude and direction, with results dependent on sign of parameter values for main effects and interaction. Including a spurious interaction does not affect estimation of direct effects of intercept and covariate but does increase standard errors. The primary problem in ignoring a non-null interaction lies in misinterpretation of the model, as interactions yield important insights into the nature of the processes being studied. 相似文献
8.
Gary R. Pike 《Research in higher education》1991,32(5):499-524
Calls for accountability, coupled with a desire to improve teaching and learning, have prompted many colleges and universities to consider ways of assessing the effects of postsecondary education on student growth and development. Despite widespread support for the concept of assessing student change, relatively few institutions have implemented this type of assessment, in part because of a concern about the best method of measuring change. This article describes the use of structural equation models with latent variables to assess the effects of education on change. Advantages of using structural equation models with latent variables include error-free measurement of change, direct tests of the assumptions underlying change research, along with the power and flexibility of maximum likelihood estimation. An analysis of data on freshman-to-senior gains provides evidence of the advantages of latent variable structural equation modeling and also suggests that the group differences identified by traditional analysis of variance and covariance techniques may be an artifact of measurement error. 相似文献
9.
Deborah L. Bandalos 《Structural equation modeling》2013,20(1):102-116
Robust maximum likelihood (ML) and categorical diagonally weighted least squares (cat-DWLS) estimation have both been proposed for use with categorized and nonnormally distributed data. This study compares results from the 2 methods in terms of parameter estimate and standard error bias, power, and Type I error control, with unadjusted ML and WLS estimation methods included for purposes of comparison. Conditions manipulated include model misspecification, level of asymmetry, level and categorization, sample size, and type and size of the model. Results indicate that cat-DWLS estimation method results in the least parameter estimate and standard error bias under the majority of conditions studied. Cat-DWLS parameter estimates and standard errors were generally the least affected by model misspecification of the estimation methods studied. Robust ML also performed well, yielding relatively unbiased parameter estimates and standard errors. However, both cat-DWLS and robust ML resulted in low power under conditions of high data asymmetry, small sample sizes, and mild model misspecification. For more optimal conditions, power for these estimators was adequate. 相似文献
10.
11.
When conducting longitudinal research, the investigation of between-individual differences in patterns of within-individual change can provide important insights. In this article, we use simulation methods to investigate the performance of a model-based exploratory data mining technique—structural equation model trees (SEM trees; Brandmaier, Oertzen, McArdle, & Lindenberger, 2013)—as a tool for detecting population heterogeneity. We use a latent-change score model as a data generation model and manipulate the precision of the information provided by a covariate about the true latent profile as well as other factors, including sample size, under the possible influences of model misspecifications. Simulation results show that, compared with latent growth curve mixture models, SEM trees might be very sensitive to model misspecification in estimating the number of classes. This can be attributed to the lower statistical power in identifying classes, resulting from smaller differences of parameters prescribed by the template model between classes. 相似文献
12.
Mediation models are commonly used to identify the mechanisms through which one variable influences another. Among longitudinal mediation methods, latent difference score mediation stands out due to its unique ability to capture nonlinear change over time. However, there is limited information regarding sample size demands to achieve adequate power with this method, resulting in few applications of latent difference score mediation. To address this limitation, the current study presents empirically supported sample size guidelines for 10 common latent difference score mediation structural models and 9 unique population models. The results of this study offer researchers with a set of representative sample estimates that may be used when designing studies or seeking funding. 相似文献
13.
In educational and psychological measurement, a person-fit statistic (PFS) is designed to identify aberrant response patterns. For parametric PFSs, valid inference depends on several assumptions, one of which is that the item response theory (IRT) model is correctly specified. Previous studies have used empirical data sets to explore the effects of model misspecification on PFSs. We further this line of research by using a simulation study, which allows us to explore issues that may be of interest to practitioners. Results show that, depending on the generating and analysis item models, Type I error rates at fixed values of the latent variable may be greatly inflated, even when the aggregate rates are relatively accurate. Results also show that misspecification is most likely to affect PFSs for examinees with extreme latent variable scores. Two empirical data analyses are used to illustrate the importance of model specification. 相似文献
14.
The accuracy of structural model parameter estimates in latent variable mixture modeling was explored with a 3 (sample size) × 3 (exogenous latent mean difference) × 3 (endogenous latent mean difference) × 3 (correlation between factors) × 3 (mixture proportions) factorial design. In addition, the efficacy of several likelihood-based statistics (Akaike's Information Criterion [AIC], Bayesian Information Ctriterion [BIC], the sample-size adjusted BIC [ssBIC], the consistent AIC [CAIC], the Vuong-Lo-Mendell-Rubin adjusted likelihood ratio test [aVLMR]), classification-based statistics (CLC [classification likelihood information criterion], ICL-BIC [integrated classification likelihood], normalized entropy criterion [NEC], entropy), and distributional statistics (multivariate skew and kurtosis test) were examined to determine which statistics best recover the correct number of components. Results indicate that the structural parameters were recovered, but the model fit statistics were not exceedingly accurate. The ssBIC statistic was the most accurate statistic, and the CLC, ICL-BIC, and aVLMR showed limited utility. However, none of these statistics were accurate for small samples (n = 500). 相似文献
15.
For some time, there have been differing recommendations about how and when to include covariates in the mixture model building process. Some have advocated the inclusion of covariates after enumeration, whereas others recommend including them early on in the modeling process. These conflicting recommendations have led to inconsistent practices and unease in trusting modeling results. In an attempt to resolve this discord, we conducted a Monte Carlo simulation to examine the impact of covariate exclusion and misspecification of covariate effects on the enumeration process. We considered population and analysis models with both direct and indirect paths from the covariates to the latent class indicators. As expected, misspecified covariate effects most commonly led to the overextraction of classes. Findings suggest that the number of classes could be reliably determined using the unconditional latent class model, thus our recommendation is that class enumeration be done prior to the inclusion of covariates. 相似文献
16.
This study investigated the performance of fit indexes in selecting a covariance structure for longitudinal data. Data were simulated to follow a compound symmetry, first-order autoregressive, first-order moving average, or random-coefficients covariance structure. We examined the ability of the likelihood ratio test (LRT), root mean square error of approximation (RMSEA), comparative fit index (CFI), and Tucker–Lewis Index (TLI) to reject misspecified models with varying degrees of misspecification. With a sample size of 20, RMSEA, CFI, and TLI are high in both Type I and Type II error rates, whereas LRT has a high Type II error rate. With a sample size of 100, these indexes generally have satisfactory performance, but CFI and TLI are affected by a confounding effect of their baseline model. Akaike's Information Criterion (AIC) and Bayesian Information Criterion (BIC) have high success rates in identifying the true model when sample size is 100. A comparison with the mixed model approach indicates that separately modeling the means and covariance structures in structural equation modeling dramatically improves the success rate of AIC and BIC. 相似文献
17.
Nonrecursive structural equation models generally take the form of feedback loops, involving 2 latent variables that are connected by 2 unidirectional paths, 1 starting with each variable and terminating in the other variable. Nonrecursive models belong to a larger class of path models that require the use of instrumental variables (IVs) to achieve model identification. Prior research has focused on SEM parameter estimation with IVs when indicators were continuous and normally distributed. Much less is known about how estimators function in the presence of categorical indicators, which are commonly used in the social sciences, such as with cognitive and affective instruments. In this study, there was specific interest in comparing the 2-stage least squares (2SLS) estimator and its categorical variant to other recommended estimators. This study compares the performance of several estimation approaches for fitting structural equation models with categorical indicator variables when IVs are necessary to obtain proper model estimates. Across conditions, 1 extension of the nonlinear 2SLS (N2SLS) approach, the nonlinear 3-stage least squares (N3SLS), which accounts for correlated errors among regressors within each model (as does the N2SLS), as well as correlations of errors across models, which N2SLS does not, appears to work the best among methods compared. 相似文献
18.
Willem E. Saris Albert Satorra William M. van der Veld 《Structural equation modeling》2013,20(4):561-582
Assessing the correctness of a structural equation model is essential to avoid drawing incorrect conclusions from empirical research. In the past, the chi-square test was recommended for assessing the correctness of the model but this test has been criticized because of its sensitivity to sample size. As a reaction, an abundance of fit indexes have been developed. The result of these developments is that structural equation modeling packages are now producing a large list of fit measures. One would think that this progression has led to a clear understanding of evaluating models with respect to model misspecifications. In this article we question the validity of approaches for model evaluation based on overall goodness-of-fit indexes. The argument against such usage is that they do not provide an adequate indication of the “size” of the model's misspecification. That is, they vary dramatically with the values of incidental parameters that are unrelated with the misspecification in the model. This is illustrated using simple but fundamental models. As an alternative method of model evaluation, we suggest using the expected parameter change in combination with the modification index (MI) and the power of the MI test. 相似文献
19.
Appropriate model specification is fundamental to unbiased parameter estimates and accurate model interpretations in structural equation modeling. Thus detecting potential model misspecification has drawn the attention of many researchers. This simulation study evaluates the efficacy of the Bayesian approach (the posterior predictive checking, or PPC procedure) under multilevel bifactor model misspecification (i.e., ignoring a specific factor at the within level). The impact of model misspecification on structural coefficients was also examined in terms of bias and power. Results showed that the PPC procedure performed better in detecting multilevel bifactor model misspecification, when the misspecification became more severe and sample size was larger. Structural coefficients were increasingly negatively biased at the within level, as model misspecification became more severe. Model misspecification at the within level affected the between-level structural coefficient estimates more when data dependency was lower and the number of clusters was smaller. Implications for researchers are discussed. 相似文献
20.
Sensitivity Analysis of the No-Omitted Confounder Assumption in Latent Growth Curve Mediation Models
Davood Tofighi Yu-Yu Hsiao Eric S. Kruger David P. MacKinnon M. Lee Van Horn Katie Witkiewitz 《Structural equation modeling》2019,26(1):94-109
Latent growth curve mediation models are increasingly used to assess mechanisms of behavior change. For latent growth mediation model, like any another mediation model, even with random treatment assignment, a critical but untestable assumption for valid and unbiased estimates of the indirect effects is that there should be no omitted variable that confounds indirect effects. One way to address this untestable assumption is to conduct sensitivity analysis to assess whether the inference about an indirect effect would change under varying degrees of confounding bias. We developed a sensitivity analysis technique for a latent growth curve mediation model. We compute the biasing effect of confounding on point and confidence interval estimates of the indirect effects in a structural equation modeling framework. We illustrate sensitivity plots to visualize the effects of confounding on each indirect effect and present an empirical example to illustrate the application of the sensitivity analysis. 相似文献