Distributed framework for yard planning in container terminals     

Kap Hwan Kim  Xiao-hui Zhang 《浙江大学学报(A卷英文版)》2010,11(12):992-997

This study discusses a yard planning system,which considers various resources such as storage space,yard cranes,and traffic areas in container terminals.The system is based on the function for estimating resource requirements of yard plans.For a given yard plan,the proposed system allows planners to check the feasibility of the plan which requires a certain amount of workload of resources in related blocks during a planning horizon.The yard planning system in this study is aimed at balancing workloads among the blocks and providing the ability to modify current yard plans by detecting blocks and periods with overloaded workloads.The system implements its planning function in a distributed manner in which planners construct yard plans under their individual control and send and receive only limited necessary information for the negotiation.  相似文献   

Green’s functions for infinite planes and half-planes consisting of quasicrystal bi-materials     

Yang Gao 《浙江大学学报(A卷英文版)》2010,11(10):835-840

This paper deals with the combination of point phonon and phason forces applied in the interior of infinite planes and half-planes of 1D quasicrystal bi-materials. Based on the general solution of quasicrystals, a series of displacement functions are adopted to obtain Green＇s functions for infinite planes and bi-material planes composed of two half-planes in the closed form, when the two half-planes are supposed to be ideally bonded or to be in smooth contact. Since the physical quantities can be readily calculated without the need of performing any transform operations, Green＇s functions are very convenient to be used in the study of point defects and inhomogeneities in the quasicrystal materials.  相似文献   

Dynamics of a prestressed Timoshenko beam subject to arbitrary external load     

Ji-qing Jiang  Gui-ru Ye 《浙江大学学报(A卷英文版)》2010,11(11):898-907

The free vibration and transient wave in a prestressed Rayleigh-Timoshenko beam subject to arbitrary transverse forces are analyzed by the newly developed method of reverberation-ray matrix （MRRM）. The effects of shear deformation and rotational inertia are taken into consideration. With a Fourier transform technique, the general wave solutions with two sets of unknown amplitude coefficients are obtained in the transformed domain for an unbonded prestressed beam under the action of arbitrary external excitations. From the coupling at joints and the compatibility of displacements in each member, the free and forced vibration responses of a beam with various boundary conditions are finally evaluated through certain numerical algorithms, Results are presented for a simply-supported beam subject to either a point fixed load or moving load. Good agreement with the finite element method （FEM） is obtained. The present work is instructive for high-speed railway bridge design and structural health monitoring.  相似文献   

Tool wear criterion,tool life,and surface roughness during high-speed end milling Ti-6Al-4V alloy     

Song Zhang  Jian-feng Li 《浙江大学学报(A卷英文版)》2010,11(8):587-595

The objective of the present research is to investigate the relationship among tool wear, surface topography, and surface roughness when high-speed end milling Ti-6Al-4V alloy, and also to define an optimal flank wear criterion for the cutting tool to integrate tool life and the surface roughness requirements of the finish milling process. An annealed Ti-6Al-4V alloy was selected as the workpiece material, undergoing end milling with uncoated carbide inserts. The flank wear of the insert was observed and measured with the toolmaker＇s microscope. To examine machined surfaces, 3D surface topography was provided by the white light interferometer, and the arithmetical mean roughness （Ra） was calculated with the WYKO Vision32 software. The flank wear increases with cutting time, and the maximal flank wear is set as the flank wear criterion. As the cutting process progresses, tool wear is the predominant factor affecting the variation of surface roughness. According to the plots for the tool wear propagation and surface roughness variation, an optimal flank wear criterion can be defined which integrates the tool life and the surface roughness requirements for the finish milling process.  相似文献   

Numerical computations of the flow in a finite diverging channel     

Zhao-sheng Yu  Xue-ming Shao  Jian-zhong Lin 《浙江大学学报(A卷英文版)》2010,11(1):50-60

The flow in a finite diverging channel opening into a large space and resembling the experimental prototype of Putkaradze and Vorobieff （2006） was numerically investigated. The effects of the Reynolds number, initial condition, intersection angle, length of the wedge edges, and the outer boundary condition were examined. The numerical results showed that the flow in the wedge undergoes a change from symmetrical flow to unsymmetrical flow with a weak backflow, then a vortical （circulation） flow and finally an unsteady jet flow as the Reynolds number is increased for an intersection angle of 32° and a wedge edge of length 30 times the width of the inlet slit. For the unsteady flow, the jet attached to one side of the wedge constantly loses stability and rolls up into a mushroom-shaped vortex-pair near the outlet of the wedge. As the intersection angle is increased to 50°, a stable jet flow is observed as a new regime between the vortex and unsteady regimes. Both the intersection angle and the wedge length have negative effects on the stability of the flow, although the effect of the wedge length on the critical Reynolds number for the symmetry-breaking instability is not pronounced. The outer boundary condition was found not to affect the flow patterns inside the wedge significantly. At a certain Re regime above the onset of symmetry-breaking instability, the flows evolve into steady state very slowly except for the initial stage in the case of decreasing flow flux. Two different solutions can be observed within the normal observation time for the experiment, providing a possible explanation for the hysteresis phenomenon in the experiment.  相似文献   

Effect of a semi electro-mechanical engine valve on performance and emissions in a single cylinder spark ignited engine     

Bülent 《浙江大学学报(A卷英文版)》2010,11(2):106-114

In this study, an electro-mechanical valve （EMV） system for the intake valve ofa fottr stroke, single cylinder, overhead valve and spark ignition （SI） engine was designed and constructed. An engine with the EMV system and a standard engine were tested to observe the effects of the EMV on engine performance and emissions at different speeds under full load. The EMV engine showed improved engine power, engine torque and break specific fuel consumption （BSFC）. A 66% decrease in CO emissions was also obtained with the EMV system, but hydrocarbons （HC） and NOx emissions increased by 12% and 13% respectively.  相似文献   

Temporal variation in modal properties of a base-isolated building during an earthquake     

Izuru TAKEWAKI  Mitsuru NAKAMURA 《浙江大学学报(A卷英文版)》2010,11(1):1-8

Temporal variation of dynamical modal properties of a base-isolated building is investigated using earthquake records in the building. A batch processing least-squares estimation method is applied to segment-wise time-series data. To construct an input-output system, an auto-regressive model with exogenous input （ARX） of second-order including a forgetting coefficient as a weighting coefficient is used for the estimation of modal parameters. The fundamental and second natural frequencies and the damping ratios of the fundamental and second natural modes of the base-isolated building are identified in the time domain. The identified results are consistent with the results obtained from the micro-tremor vibration data, forced-vibration test data and earthquake records in the present base-isolated building in the case of taking into account the amplitude-dependency of the iso- lators and viscous dampers. It is finally pointed out that several factors, e.g., amplitude dependency of the isolator and damper system and special characteristics of the series-type viscous damper system, may be related complicatedly with the temporal variation in modal properties of the above-mentioned system.  相似文献   

Improved response surface method for anti-slide reliability analysis of gravity dam based on weighted regression   总被引：1，自引：0，他引：1  

Jian-yun Chen  Qiang Xu  Jing Li  Shu-li Fan 《浙江大学学报(A卷英文版)》2010,11(6):432-439

The aim of this study was to design and construct an improved response surface method （RSM） based on weighted regression for the anti-slide reliability analysis of concrete gravity dam. The limitation and lacuna of the traditional RSM were briefly analyzed. Firstly, based on small experimental points, research was devoted to an improved RSM with singular value decomposition techniques. Then, the method was used on the basis of weighted regression and deviation coefficient correction to reduce iteration times and experimental points and improve the calculation method of checking point. Finally, a test example was given to verify this method. Compared with other conventional algorithms, this method has some strong advantages： this algorithm not only saves the arithmetic operations but also greatly enhances the calculation efficiency and the storage efficiency.  相似文献   

<Emphasis Type="Italic">Minerva</Emphasis> and the Development of Science (Policy) Studies     

Niels C. Taubert 《Minerva》2012,50(3):261-275

This article analyzes the transformation of Minerva from an intellectual towards a scholarly journal by making use of bibliometric methods. The aim is to provide some empirical insights that help to understand what properties of the journal changed in the course of this transformation process. Minerva was one of the first journals that reflected on science and its role in society and science policy in particular. Analyzing the development of the journal sheds light on the emergence of science (policy) studies and on Minerva’s role as a forerunner in this field. In a first step, the methods will be described. The second section provides some empirical results of the publication output of Minerva and its relations to other journals in the field. The empirical findings are put into a broader perspective in the concluding third section.  相似文献   

The Congress for Cultural Freedom, <Emphasis Type="Italic">Minerva</Emphasis>, and the Quest for Instituting “Science Studies” in the Age of Cold War     

Elena Aronova 《Minerva》2012,50(3):307-337

The Congress for Cultural Freedom is remembered as a paramount example of the “cultural cold wars.” In this paper, I discuss the ways in which this powerful transnational organization sought to promote “science studies” as a distinct – and politically relevant – area of expertise, and part of the CCF broader agenda to offer a renewed framework for liberalism. By means of its Study Groups, international conferences and its periodicals, such as Minerva, the Congress developed into an influential forum for examining the ways Big Science impacted the relations between science, society, and politics, thus constituting a semi-institutional niche for Science Studies before its professionalization within academia during the 1970s. I argue that the Congress contributed to the construction of public space in which the relations between science, society and politics were debated, and science was reconceptualized as a social activity. The vision of “science studies” the CCF-associated intellectuals promulgated was different from the science studies we know today. Yet, this alternative vision, in which the issues of science politics appeared inseparable from those of science policy, science organization, and science governance, constituted the “pre-history” of science studies today.  相似文献