住宅楼工程混凝土楼板裂缝分析     

薛国正 《河南科技学院学报》2006,34(2):71-72

通过对某商品住宅楼的楼板裂缝进行分析和处理，提出今后设计和施工中值得注意的若干问题及其预防技术措施。  相似文献   

Shear capacity of reinforced concrete columns strengthened with CFRP sheet     

谢剑  刘雪梅赵彤 《浙江大学学报(A卷英文版)》2005,6(8):853-858

INTRODUCTION There is increased need in recent years for strengthening or rehabilitation of existing reinforced concrete structures adversely affected by overloading, construction material deterioration, seismic loads, structural deformation, etc. An effective method for increasing the shear capacity of reinforced concrete columns is the use of externally bonded carbon fiber reinforced plastic (CFRP) systems (ACI, 2002). FRP systems were first applied to reinforced concrete col-umns i…  相似文献   

超细矿物粉体增强材料的研究与开发     

张继成 《青海师专学报》2007,27(5):84-86

本文在实验测试和统计的基础上,从微粉粒径、粒型等结构特点出发,研究超细微粉经过表面活性处理,与基体材料复合后,表现出独特的物理、化学性质的机理,继而依据此机理开发出各种超细矿物粉体增强材料.  相似文献   

Modeling of Normal Perforation of Reinforced Concrete Slabs by a Rigid Projectile   总被引：2，自引：0，他引：2  

CHEN Xiaowei  LI Xiaoli 《天津大学学报(英文版)》2006,12(Z1)

An analytical model on the normal perforation of reinforced concrete slabs is constructed. The effect of reinforcing bars is further hybridized in a general three-stage model consisting of initial cratering, tunnelling and shear plugging. Besides three dimensionless numbers, i. e. , the impact function /, the geometry function of projectile N and the dimensionless thickness of concrete target X, which are employed to predict the ballistic performance of perforation of concrete slabs, the reinforcement ratioρs of concrete and the tensile strength fs of reinforcing bars are considered as the other main factors influencing the perforation process. Simpler solutions of ballistic performances of normal perforation of reinforced concrete slabs are formulated. Theoretical predictions agree well with individual published experimental data.  相似文献   

轻钢骨砼结构应用技术及抗剪性能的研究     

孙翠兰 《河北工业大学成人教育学院学报》2007,22(4):49-52,62

轻钢骨混凝土结构是一种新型的结构体系,它自重轻,安装方便,保温性能好,因而有广阔的发展余地和使用空间。本文分别对轻钢骨模网混凝土的工作性能、轻钢骨剪力墙的抗剪性能做了深入的理论研究。用3片缩尺轻钢骨剪力墙模型进行了试验研究,并推导了轻钢骨剪力墙的抗剪承载力公式。由于模型试验构件少,数据有所不足,本文又采用ADINA有限元分析软件进行分析,提出有关轻钢骨砼剪力墙轴压比设计的建议。  相似文献   

Numerical Simulation of Response of SRC Columns Subjected to Blast Loading     

SUN Jianyun  LI Guoqiang  LU Yong 《天津大学学报(英文版)》2006,12(Z1)

The dynamic characteristics and failure modes of steel reinforced concrete (SRC) columns subjected to blast loading are complicated because of the transient stress wave in the SRC columns and the interaction between steel and concrete. This paper presents a numerical simulation of the response of SRC columns subjected to blast loading using hydrocode LS-DYNA. In the numerical model, a sophisticate concrete material model (the Concrete Damage Model) is employed with consideration of the strain rate effect and the damage accumulation. An erosion technique is adopted to model the spalling process of concrete. The possible failure modes of SRC columns are evaluated. It is observed that the failure of SRC columns subjected to blast load can generally be classified into three modes, namely, a direct failure in concrete body due to the stress wave, a transverse shear failure near the support sections due to the high shear force, and a flexural failure pertaining to large local and global deformation of the reinforcing steel.  相似文献   

Dynamic Stability Analysis of Cages in High-Speed Oil-Lubricated Angular Contact Ball Bearings     

刘秀海  邓四二  滕弘飞 《天津大学学报(英文版)》2011,17(1):20-27

To investigate the cage stability of high-speed oil-lubricated angular contact ball bearings, a dynamic model of cages is developed on the basis of Gupta’s and Meeks’ work. The model can simulate the cage motion under oil lubrication with all six degrees of freedom. Particularly, the model introduces oil-film damping and hysteresis damping, and deals with the collision contact as imperfect elastic contact. In addition, the effects of inner ring rotational speed, the ratio of pocket clearance to guiding clearance and applied load on the cage stability are investigated by simulating the cage motion with the model. The results can provide a theoretical basis for the design of ball bearing parameters.  相似文献   

工业大气环境中钢混结构的腐蚀原理和阴极保护     

雷雳坤  谢力 《兰州石化职业技术学院学报》2011,11(1):7-9

钢筋锈蚀和影响钢筋锈蚀速度的原因是多样的,针对含氯离子的工业大气环境对钢筋锈蚀的影响,阐述了发生腐蚀的机理和影响因素,分析了钢混结构裂缝产生的原因,探讨了电化学腐蚀与一般腐蚀的区别.在此基础上提出了现有防治措施的不足,并重点介绍了阴极保护的方法,同时也对钢筋锈蚀后的修补与应用进行了进一步的探讨.  相似文献   

某大悬挑建筑的结构设计与分析     

李为国 《福建工程学院学报》2011,9(1):7-10,26

处在高空中的悬挑结构,由于所处位置的重要性和悬挑结构发生破坏时的不可挽回性,决定了设计者在安全与经济2个方面的选择上,必须把安全因素放在第一位。文章通过对某工程大悬挑结构选型和材料选用的对比分析,说明采用型钢混凝土梁柱结构并结合一些相应的构造措施,可以较好地解决大悬挑的结构设计问题。  相似文献   

前生醒觉竟伤逝,今世混沌只半生——亦舒《我的前半生》与鲁迅《伤逝》的书写比较     

杨雅洁 《湖州师范学院学报》2011,33(5):29-32

鲁迅的《伤逝》是从男性角度写感情蜕变的故事,亦舒的《我的前半生》写的是同样的主题,但是却写出了不一样的结局。这种变化为我们展示了不同时代背景下男女作家对婚姻的不同诠释,以及女性在新时代中的不同选择和不同命运。  相似文献