排序方式: 共有49条查询结果,搜索用时 15 毫秒
1.
采用高温固相法,自废旧锂离子电池中回收制备LiAlO2,并采用XRD方法表征了LiAlO2的物相成份。结果表明,900℃培烧2h制备的LiCoO2与Al箔按化学计量比n(Li):n(A1)=4:5混合均匀后,再在800℃培烧2h后制备的LiAlO2的晶形结构较好。 相似文献
2.
将不同三价铁盐和合成工艺来制备高密度FePO4前驱体,分别从反应物浓度、终点pH值、以及干燥方式等因素对密度的影响进行了分析,得出了最佳工艺合成条件.实验结果表明:当温度保持在50℃,Fe(NO3)3.9H2O浓度为1.1mol/L,并且控制pH值=1.3,采用二次干燥工艺,可得到密度为1.55g/cm3锂离子正极材料前驱体FePO4. 相似文献
3.
Lithium–sulfur batteries have great potential for high-performance energy-storage devices, yet the severe diffusion of soluble polysulfide to electrolyte greatly limits their practical applications. To address the above issues, herein we design and synthesize a novel polymer binder with single lithium-ion channels allowing fast lithium-ion transport while blocking the shuttle of unnecessary polysulfide anions. In situ UV–vis spectroscopy measurements reveal that the prepared polymer binder has effective immobilization to polysulfide intermediates. As expected, the resultant sulfur cathode achieves an excellent specific capacity of 1310 mAh g−1 at 0.2 C, high Coulombic efficiency of 99.5% at 0.5 C after 100 cycles and stable cycling performance for 300 cycles at 1 C (1 C = 1675 mA g−1). This study reports a new avenue to assemble a polymer binder with a single lithium-ion channel for solving the serious problem of energy attenuation of lithium–sulfur batteries. 相似文献
4.
随着铅酸蓄电瓶在通用航空轻型飞机上的广泛应用,为了保证飞行安全,降低维护成本,各维修单位也越来越重视其日常维护工作,不断完善和规范电瓶的维护程序。正确理解和掌握维护工作中所使用到的常用维护术语,纠正认识上的误区,有助于维护人员能更好地完成电瓶日常维护工作。 相似文献
5.
6.
The lithium-sulfur (Li-S) battery is considered to be a potential next-generation power battery system, however, it is urgent that suitable materials are found in order to solve a series of challenges, such as the shuttle effect and lithium dendrite growth. As a multifunctional porous material, metal-organic frameworks (MOFs) can be used in different parts of Li-S batteries. In recent years, the application of MOFs in Li-S batteries has been developed rapidly. This review summarizes the milestone works and recent advances of MOFs in various aspects of Li-S batteries, including cathode, separator and electrolyte. The factors affecting the performance of MOFs and the working mechanisms of MOFs in these different parts are also discussed in detail. Finally, the opportunities and challenges for the application of MOFs in Li-S batteries are proposed. We also put forward feasible solutions to related problems. This review will provide better guidance for the rational design of novel MOF-based materials for Li-S batteries. 相似文献
7.
8.
刘先明 《广东教育学院学报》2010,30(3):35-37
利用光学原理,电机驱动技术、气动定位技术、机械锁和安全门防护系统测定锂电池经高空重物抛投,撞击电池的检测方法,当重锤从空中跌落到锂电池时,锂电池在受到强烈碰撞下,对电池的性能变化的测试.实验结果显示:高空重物的抛投、加速度、着力点对锂电池性能影响较大.研究表明检测机构对锂电池受到外界冲击力作用下,数据采集,性能分析,准确、真实. 相似文献
9.
以Li2CO3和V2O5为原料,用中热固相法制备了掺杂不同氟离子含量的锂离子电池正极材料Li1+xV3O8-yFy,采用XRD衍射对其结构进行表征,并通过充放电测试、循环伏安及电导率测试对其性能进行了研究.测试结果表明,中热固相法制得的Li1+xV3O8-yFy产品较纯,没有杂质相存在;当y=0.1时产品的电化学循环性能最好,首次放电比容量达252.08 mAh/g,以0.2c倍率循环25次之后比容量仍保持在210.93 mAh/g,容量保持率达92.72%. 相似文献
10.
锂离子二次电池用锡基负极材料具有高容量、低成本等优势,是目前高容量负极材料的研究热点之一。本文介绍了锂离子二次电池用锡基负极材料的特点及其储锂机理,综述了几种锡基材料的制备方法及性能,并讨论了它们的优缺点。 相似文献