Investigations regarding the behaviour of historic glass and its surface layers towards different wavelengths applied for laser cleaning     

Farideh Fekrsanati  Stefan Klein  Jens Hildenhagen  Klaus Dickmann  Yiorgos Marakis  Aleka Manousaki  Vassilis Zafiropulos   《Journal of Cultural Heritage》2001,2(4):187

The application of lasers for the removal of superficial deposits from historic stained glass is a comparatively new field of scientific interest. Experimental studies concerning the behaviour of glass substrates and the corresponding superficial deposits towards different laser wavelengths were carried out. The experiments were performed using wavelengths of λ = 193 nm (ArF-Excimer), 308 nm (XeCl-Excimer), 355 nm (Nd:YAG third harmonic) and 1 064 nm (Nd:YAG fundamental) in comparison to λ = 248 nm (KrF-Excimer). This comparison is due to the fact that the present knowledge is based on the 248 nm wavelength. Specially prepared model glass samples representing the original fragments and samples of organic polymers (formerly used as a protective material for historic stained glasses) were used to study the effects of laser radiation and were subsequently characterised by optical microscopy.  相似文献   

自洁净玻璃的研究综述     

方向红 《安徽职业技术学院学报》2006,5(3):9-13

文章根据近年来国内外对自洁净玻璃的研究现状,对自洁净玻璃的研制方法、步骤进行了说明,对自洁净玻璃表面纳米氧化物薄膜的制备方法的研究进展状况进行了综述,并对其优缺点进行了比较。  相似文献   

浅析《玻璃学士》的创作初衷     

邱晓静 《泰州职业技术学院学报》2011,11(3):37-39

在塞万提斯的《玻璃学士》一文中塑造了另一个堂·吉诃德,主人公一生坎坷,其功成名就反而是在疯癫之时,不可不谓之造物弄人。文章着重从主人公三段人生经历对其个性加以分析,以此分析作者的创作初衷。  相似文献   

Light-induced cracking and abrasion of inkjet prints: Damage and mitigation     

Andrea Venosa  Daniel Burge  Eugene Salesin 《文物保护研究》2016,61(1):94-100

This study is part of a larger research project at the Image Permanence Institute dedicated to digital print preservation issues – the Digital Print Preservation Portal (DP3). Previous DP3 studies determined that certain digital print types are prone to cracking and/or abrasion, and that factors such as low relative humidity, pollutants, and light increase the brittleness of the ink-receiving layer of some inkjet papers. The purpose of this investigation was to explore if light also increases the propensity of inkjet prints to abrade, and to examine the potential of framing glazings to mitigate light-induced physical damage (cracking and abrasion) by attenuating some portion of the UV spectrum. Inkjet papers and prints were subjected to xenon lighting (to simulate daylight through window glass) without glazing, or in sealed framing packages with plain framing glass (soda-lime) or UV filtering glass. Before and after light exposure, brittleness, and abrasion resistance were evaluated independently using two tests: ISO 18907 (Imaging materials – Photographic films and papers – Wedge test for brittleness) and a rub test utilizing a Sutherland® Rub Tester. In this study, exposure to light increased the cracking and/or abrasion tendency of some specimens. The use of UV filtering glass reduced this light-induced propensity in all cases. Plain glass protected all samples from at least one of these two types of surface damage, but was less effective than UV glass. Light-induced brittleness and sensitivity to abrasion were mostly, though not exclusively, caused by UV radiation. It was also seen that some prints may become brittle and/or prone to abrasion in the absence of image fade. Budgeting the amount of light these objects can be exposed to, protecting them from UV radiation, and handling prints with caution especially after exhibition, is essential in order to limit physical damage.  相似文献   

高速Turbo译码器的设计与实现     

崔立廷  侯娟 《石家庄职业技术学院学报》2011,23(6):27-29,38

给出了Turbo译码器的FPGA实现方案．译码器采用了Log．MAP译码算法和基于滑动窗的实现方法,可以对不同的Turbo码长进行译码．在Xilinx公司的Ve6vlxl30t-2ff484上验证了其实现的有效性：当码长为1434时,5次迭代,译码延迟374弘s,数据吞吐量为8．6Mbits／s．并在高斯白噪声下测试了Turbo码的误码率性能．  相似文献   

多元函数的窗口Fourier变换     

刘龙飞  余保民  曹怀信 《渭南师范学院学报》2011,26(6):9+11-14

用算子论和积分论的方法,研究了多元函数的规范窗口Fourier变换Twwinf的连续性和有界性.证明了Twwin的弱反演公式和强反演公式,给出了算子Twwin的值域刻画定理.  相似文献   

语言艺术在体育教学中的运用     

张弘强 《泰州职业技术学院学报》2011,11(2):47-48,51

在科技高速发展的今天,学校运用高科技手段进行教学,已成必然。作为一名教育工作者,特别是一线体育教师,一定的语言表达艺术水平,是必备的基本功。语言艺术的运用,直接影响到教育教学质量。文章就体育教师的语言能力运用,提出一些想法和做法。供大家在今后的教学中参考和借鉴。同时还须提醒各位教师语言艺术能力不但缺不得,更需要大力加强训练并不断提高。  相似文献   

平板玻璃再烤成型后的化学磨砂     

沈友  丘慧澄 《惠州学院学报》1997,17(4):80-82

本文从平板玻璃的化学组成出发，结合再烤成型后玻璃表面性质的变化，提出了一套较为完善的化学磨砂法，经批量生产，成品率达99％。  相似文献   

SrTiO_3微晶玻璃的低温制备及性能     

朱津裘 《中山大学学报论丛》1992,(2)

采用低温法制备出SrTiO_8微晶玻璃.对样品进行了X-射线和DTA及ε-T曲线的测定。结果表明,在样品用料中加入一定量的碱金属氧化物,可以在较低温度下(～1350℃)制得SrTIO_8微晶玻璃。碱金属加入量的多少直接影响到微晶玻璃的制成温度.在较低温度下制得的微晶玻璃的介电常数随SrTiO_3含量的增加而增加,随温度的升高而略有升高。  相似文献   

Scratching and Turning Experiments on Machinability of Optical Glass SF6 in Diamond Cutting Process     

贾鹏  周明 《天津大学学报(英文版)》2011,17(4):280-283

To improve the machinability of optical glass and achieve optical parts with satisfied surface quality and dimensional accuracy, scratching experiments with increasing cutting depth were conducted on glass SF6 to evaluate the influence of cutting fluid properties on the machinability of glass. The sodium carbonate solution of 10.5% concentration was chosen as cutting fluid. Then the critical depths in scratching experiments with and without cutting fluid were examined. Based on this, turning experiments were carried out, and the surface quality of SF6 was assessed. Compared with the process of dry cutting, the main indexes of surface roughness decrease by over 70% totally. Experimental results indicated that the machinability of glass SF6 can be improved by using the sodium carbonate solution as cutting fluid.  相似文献