梯度铝合金压制板材的热轧变形研究 |
| |
引用本文: | 丁红珍.梯度铝合金压制板材的热轧变形研究[J].顺德职业技术学院学报,2007,5(2):23-26. |
| |
作者姓名: | 丁红珍 |
| |
作者单位: | 顺德职业技术学院机电工程系,广东,佛山,528333 |
| |
摘 要: | 研究了Alsi/al梯度铝合金压制板材在热轧大塑性变形后的组织、成分和性能变化,特别是梯度过渡区的塑性变形特征。结果说明:在变形温度为757K下,压制态合金板材经过热轧的大塑性变形后仍然保持着良好的梯度分布特征。随着变形量的增加,热轧板材梯度过渡层的非均匀性有所减少,芯部显微硬度值有所增加。
|
关 键 词: | 铝合金 梯度材料 热轧变形 |
文章编号: | 1672-6138(2007)02-0023-04 |
修稿时间: | 2007-04-03 |
Study on the Deformation of Hot Rolling of Pressing Gradient Aluminium Alloy |
| |
Authors: | DING Hong-zhen |
| |
Abstract: | The microstructure, composition distribution, property, specially the plastic deformation characteristics of the transition zone of the Alsi/al pressing gradient aluminium alloy after hot rolling are analyzed. The result shows that the material keeps good gradient distribution after hot rolling at 757K, and the non-homogeneous feature of its transition zone will reduce and the microhardness of its inner zone will increase with the increment of deforming amount. |
| |
Keywords: | aluminium alloy gradient material deformation under hot rolling |
本文献已被 CNKI 维普 万方数据 等数据库收录! |