| 气淬高炉渣颗粒凝固行为数值模拟 |
| |
| 引用本文： | 王丽丽,客海滨,王立梅.气淬高炉渣颗粒凝固行为数值模拟[J].唐山学院学报,2022,35(6):35-40. |
| |
| 作者姓名： | 王丽丽 客海滨 王立梅 |
| |
| 作者单位： | 唐山学院 机电工程学院, 河北 唐山 063000;唐山学院 河北省智能装备数字化设计及过程仿真重点实验室, 河北 唐山 063000;河钢唐钢集团 炼铁事业部, 河北 唐山 063016 |
| |
| 摘 要： | 针对气淬粒化装置中高炉渣颗粒的凝固行为,采用凝固熔化模型、流体体积函数模型和离散坐标辐射模型进行了三维瞬态模拟。考虑炉渣凝固过程中的物性参数变化,主要研究了颗粒的凝固过程、相界面移动速度、颗粒温度分布及周围空气速度分布。结果表明:颗粒凝固过程中固相分布不均匀,迎风面固相厚度大于背风面,这主要由迎风面空气速度比背风面快所致;固相-模糊区界面和模糊区-液相界面移动速度先增加后降低,这是由于在颗粒凝固前期导热系数的影响占主导地位、在凝固后期导热热阻的影响占主导地位;在凝固过程中,颗粒温度由外向内逐渐升高,内部温度降低缓慢。
|
| 关 键 词： | 气淬粒化法 高炉渣颗粒 凝固行为 数值模拟 |
Numerical Simulation of Solidification of Gas-Quenched Blast Furnace Slag Particles |
| |
| WANG Li-li,KE Hai-bin,WANG Li-mei.Numerical Simulation of Solidification of Gas-Quenched Blast Furnace Slag Particles[J].Journal of Tangshan College,2022,35(6):35-40. |
| |
| Authors: | WANG Li-li KE Hai-bin WANG Li-mei |
| |
| Institution: | School of Electrical and Mechanical Engineering,, Tangshan University, Tangshan 063000, China;Hebei Key Lab of Intelligent Equipment Digital Design and Process Simulation, Tangshan University, Tangshan 063000, China;Iron-Making Department, HBIS Group Tangsteel Company, Tangshan 063016, China |
| |
| Abstract: | Aiming at the solidification of blast furnace slag particles in gas quenched granulation device, a three-dimensional transient simulation is carried out by using solidification melting model, fluid volume function model and discrete ordinates radiation model. With the changes of physical parameters in the solidification process considered, this paper mainly studies the solidification process of particles, the moving velocity of phase interface, particle temperature and surrounding air velocity distribution. The results show that the solid phase distribution is not uniform, and the solid phase thickness on the windward side is greater than that on the leeward side, which is mainly caused by the faster air velocity on the windward side than that on the leeward side; The moving velocity of the solid mushy zone interface and mushy zone liquid interface first increases and then decreases, which is due to the dominant influence of thermal conductivity in the early stage of particle solidification and thermal resistance in the late stage;The particle temperature increases gradually from outside to inside, and the internal temperature decreases slowly. |
| |
| Keywords: | gas quenching granulation blast furnace slag particles solidification numerical simulation |
|
| 点击此处可从《唐山学院学报》浏览原始摘要信息 |
| 点击此处可从《唐山学院学报》下载免费的PDF全文 |
|
