| 圆盘薄壁零件车削中夹具的优化 |
| |
| 引用本文： | 万余仙.圆盘薄壁零件车削中夹具的优化[J].邢台职业技术学院学报,2008,25(5):30-32. |
| |
| 作者姓名： | 万余仙 |
| |
| 作者单位： | 江苏广播电视大学,宜兴学院,江苏,宜兴,214206 |
| |
| 摘 要： | 圆盘薄壁零件在普通卧式车床的生产加工过程中，因没有足够的刚性，容易产生变形、尺寸精度起差、甚至工件脱落于夹具，导致工件报废的现象。通过优化装夹方法，改进夹具，完全能够达到零件加工的技术要求。
|
| 关 键 词： | 圆盘薄壁零件 工件刚性 夹具 切削力 |
Improvement of Disc Sheet Metal Parts in Turning |
| |
| WAN Yu-xian.Improvement of Disc Sheet Metal Parts in Turning[J].Xingtai Vocational and Technical College,2008,25(5):30-32. |
| |
| Authors: | WAN Yu-xian |
| |
| Institution: | WAN Yu-xian (Yixing College, Jiangsu Radio and TV University, Yixing, Jiangsu 214206, China) |
| |
| Abstract: | Disc thin-walled parts,while producing in the ordinary horizontal lathe,are apt to deformation,and size inaccuracy;or even much worse,the parts will fall off from the clamps,which finally cause the abandonment of the workpiece.All the above-mentioned phenomena are just due to the insufficient rigidity.By optimizing the method of clamp-putting and by improving the fixture,we can definitely reach the techinal requirements of the part processing. |
| |
| Keywords: | disc thin-walled parts workpiece rigidity clamps cutting force |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
