首页 | 本学科首页   官方微博 | 高级检索  
     检索      

T形配钢型钢混凝土偏压构件力学性能研究
引用本文:郑永乾,赖鹏松,郑莲琼.T形配钢型钢混凝土偏压构件力学性能研究[J].福建工程学院学报,2017,0(4):307-312.
作者姓名:郑永乾  赖鹏松  郑莲琼
作者单位:福建工程学院土木工程学院
摘    要:建立了T形配钢型钢混凝土偏压构件力学性能分析的有限元模型,计算结果得到以往实验结果的验证。在此基础上,分析了不同阶段材料应力状态和各参数对偏压构件力学性能的影响。结果表明:T形配钢型钢混凝土构件在不同加载角下的性能有所不同,加载角为180°时极限承载力大于其他角度情况;混凝土抗压强度、型钢含钢率、配筋率、荷载偏心率、长细比对构件荷载-变形曲线的影响较大,随着混凝土强度、型钢含钢率、配筋率的增加,极限承载力和刚度增加;随着荷载偏心率的增加,极限承载力和刚度下降;随着构件长细比的增加,构件承载力总体呈现线性下降趋势,刚度下降明显。

关 键 词:T形配钢  型钢混凝土  偏压构件  有限元

Behaviour of T-shaped steel reinforced concrete eccentric loaded columns
Zheng Yongqian,Lai Pengsong,Zheng Lianqiong.Behaviour of T-shaped steel reinforced concrete eccentric loaded columns[J].Journal of Fujian University of Technology,2017,0(4):307-312.
Authors:Zheng Yongqian  Lai Pengsong  Zheng Lianqiong
Institution:Fujian Provincial Key Laboratory of Advanced Technology and Informationization in Civil Engineering
Abstract:Finite element models for analysing the behaviour of T-shaped steel reinforced concrete eccentric loaded columns were established. The calculated results of the columns were validated by the previous experimental results. Furthermore, the material stress status at different stages and the effect of the relevant parameters on the mechanical behaviours of the columns were analysed. The results indicate that the T-shape steel reinforced concrete columns exhibit different performances at different load angles. The ultimate load bearing capacity at a load angle of 180° is higher than that of other load angles. The parameters such as concrete compressive strength, section steel ratio, steel reinforcement ratio, load eccentricity ratio and length to slenderness ratio exert significant influences on the load-deformation curves of the columns. With the increase of the concrete strength, the section steel ratio or the steel reinforcement ratio, the ultimate load bearing capacity and the stiffness increase. With the increase of the load eccentricity, the ultimate load bearing capacity and the stiffness decrease. With the increase of the length to slenderness ratio, the load bearing capacity has the tendency of linear decreasing in general with the stiffness dropping obviously.
Keywords:T-shaped steel  steel reinforced concrete  eccentric loaded column  finite element
本文献已被 CNKI 等数据库收录!
点击此处可从《福建工程学院学报》浏览原始摘要信息
点击此处可从《福建工程学院学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号