| TE_（103）单模谐振腔品质因数Q值的测量 |
| |
| 引用本文： | 蔡杰,张留琬,吴召平,王效东,郭景坤.TE_（103）单模谐振腔品质因数Q值的测量[J].中国科学院研究生院学报,1995(2). |
| |
| 作者姓名： | 蔡杰 张留琬 吴召平 王效东 郭景坤 |
| |
| 作者单位： | 中国科学院上海硅酸盐研究所，中国科学院上海冶金研究所 |
| |
| 摘 要： | ＴＥ１０３单模腔是微波烧结系统中应用最广泛的单模谐振腔，品质因数Ｑ值是度量腔体对外部激励响应的尖锐程度，是对烧结影响最大的谐振腔基本参量。采用扫频法测量，并从理论上讨论了在谐振腔中分别插入直径为８ｍｍ的不同棒状介质后，以及不同孔径、不同厚度耦合膜片对Ｑ值的影响。
|
| 关 键 词： | TE_（103）谐振腔，品质因数Q值，测量 |
The Quality Factor Measurements of TE_(103) Single-mode Resonator |
| |
| Cai Jie, Zhang Liu-wan, Wu Zhao-pin,Wang Xiao-dong, Guo Jing-kun.The Quality Factor Measurements of TE_(103) Single-mode Resonator[J].Journal of the Graduate School of the Chinese Academy of Sciences,1995(2). |
| |
| Authors: | Cai Jie Zhang Liu-wan Wu Zhao-pin Wang Xiao-dong Guo Jing-kun |
| |
| Abstract: | TE103 resonator is the single-mode applicator adopted most widely in microwave sintering system. Quality factor Q-value reflects the sharpness of response excited by outside. Frequency sweeping method is applied to determineQ-value with different dielectric rods of 8 mm in diameter inserted inside the applicator, with different size and thickness copper plate iris. Influence of the above factors have been discussed theoretically. |
| |
| Keywords: | TE_(103) resonator quality factor Q-value measurement |
| 本文献已被 CNKI 等数据库收录！ |
