| 数控车床编程加工技术及典型实例分析 |
| |
| 引用本文： | 张会桥,赵江平.数控车床编程加工技术及典型实例分析[J].茂名学院学报,2006,16(4):60-63. |
| |
| 作者姓名： | 张会桥 赵江平 |
| |
| 作者单位： | 1. 茂名市技工学校,广东,茂名,525000
2. 茂名市职业技术学院,广东,茂名,525000 |
| |
| 摘 要： | 利用数控车床进行零件的加工,要根据零件的复杂程度确定是手工编程还是自动编程,手工编程是自动编程的基础。以FANUC系统手工编程为例,从零件图纸分析,确定加工方案,数值计算,根据编程规则,主要是利用复合循环指令G71、G72、G76、G70进行编程,使用复合循环指令编程,可以大大简化程序编制,加工出符合技术要求的零件。
|
| 关 键 词： | 数控车床 编程 加工工艺 |
| 文章编号： | 1671-6590（2006）04-0060-04 |
| 收稿时间： | 2006-04-19 |
| 修稿时间： | 2006-05-22 |
Analysis on Application of Machining and Programming Based on CNC Lathe |
| |
| ZHANG Hui-qiao,ZHAO Jiang-ping.Analysis on Application of Machining and Programming Based on CNC Lathe[J].Journal of Maoming College,2006,16(4):60-63. |
| |
| Authors: | ZHANG Hui-qiao ZHAO Jiang-ping |
| |
| Abstract: | CNC machine tools have been widely used in the fields of part manufacture.The manual and automatic programming are used,depending on the complexity of manufacture,in the course of part machining.In this article,manual programming,as the basis in the two programming techniques,is well used in the process of machine diagram analysis,plan of manufacture and numerical calculation.The programming could be significantly predigested by using compound cycle commands G71,G72,G76,G70 according to the rules of program.Then the satisfactory workpieces could be easily manufactured after mastering of the operation of lathe. |
| |
| Keywords: | numerical lathe programming processing techniques |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
