| ZJ17卷接机吸风装置的改造研究 |
| |
| 引用本文： | 王强,王中亚.ZJ17卷接机吸风装置的改造研究[J].中国科技信息,2014(3):155-157. |
| |
| 作者姓名： | 王强 王中亚 |
| |
| 作者单位： | 山东中烟工业有限责任公司滕州卷烟厂,山东滕州277500 |
| |
| 摘 要： | 针对更改卷烟牌号后生产过程中卷接机组水松纸夹末问题加重这一现象,采用鱼骨图法确认靠拢鼓轮吸风孔被挡住是造成水松纸夹末烟支数量较多的主要原因.针对这一原因提出了改进吸风装置的对策,原来吸风孔位置和直径大小不变,在风孔上端沿烟槽方向开一条一定深度（2.5mm）和宽度（与吸风孔直径尺寸相同）的腰形槽,以增加风孔表面的面积.实施效果表明,“水松纸夹末”这一主要质量问题得到有效控制.
|
| 关 键 词： | 水松纸 夹末 吸风装置 |
Improvement Researchres of Suction devicee in ZJ17 |
| |
| Wang Oiang,Wang Zhongya.Improvement Researchres of Suction devicee in ZJ17[J].CHINA SCIENCE AND TECHNOLOGY INFORMATION,2014(3):155-157. |
| |
| Authors: | Wang Oiang Wang Zhongya |
| |
| Institution: | Tengzhou Cigarette Factory of China Tobacco Shandong Industrial Corporation, Tengzhou , Shandong 277500 China |
| |
| Abstract: | In order to solve cigarette brands, problems such as Cork paper clip end in the process after changing Recognized using fishbone diagram closer suction drum is caused by the end of the hole is blocked cigarette tipping paper clips large number of mainly. Measures proposed to improve the suction device for that reason, the original suction hole location and size of the same diameter, In the upper end of the vent opening along a direction of a cigarette groove depth （2.smm） and width （the same as the diameter of the suction holes） is kidney-shaped slot to increase the surface area of the vent. Implementation results indicate that the ＂end of the cork paper clip＂ The main quality issues are effectively controlled. |
| |
| Keywords: | Tipping paper Clip end Suction device |
| 本文献已被 维普 等数据库收录！ |
|
