| 不锈钢氩氧脱碳精炼过程的物理和数学模型 |
| |
| 引用本文： | 魏季和.不锈钢氩氧脱碳精炼过程的物理和数学模型[J].上海大学学报(英文版),2002,6(1):1-23. |
| |
| 作者姓名： | 魏季和 |
| |
| 作者单位： | SchoolofMaterialsScienceandEngineering,ShanghaiUniversity,Shanghai200072,China |
| |
| 基金项目： | ProjectsupportedbytheNationalNaturalScienceFoundationof
China ( 5 94740 16 ) |
| |
| 摘 要： | The available studies in the literature on physical and mathematical modeling of the argon-oxygen decarburization(AOD) process of stainless ssteel have briefly been reviewed.The latest advances made by the author with his research group have been summarized.Water modeling was used to investigate the fluid flow and mixing characteristics in the bath of an 18t AOD vessel,as well as the “back-attack” action of gas jfets and its effects on the erosion and wear of the refractory lining,with sufficiently full kinematic similarity.The non-rotating and rotating gas jets blown through two annular tuyeres,respectively of straight-tube and spiral-flat tube type.Were employed in the experiments.The geometric similarity ratio between the model and its prototype(including the straighttube type tuyeres)was 1:3 ,The influences of the gas flow rate,the angle included between the two tuyeres and other operating parameters,and the suitability of the spiral tuyere as a practical application,were examined.These latest studies have clearly and successfully brought to light the fluid flow and mixing characteristics in the bath and the overall features of the back-attack phenomena of gas jfets during the blowing.nd have offered a better understanding of the refining process.Besides,mathematical modeling for the refining process of stainless steel was carried out and a new mathematical model of the process was proposed and developed.The model performs the rate calculations of the refining and the mass and heat balances of the system.Also,the effects of the operating factors,including adding the salg materials.crop ends,and scrap,and alloy agents;the non-isothermal conditions;the changes in the amounts of metal and slag materials,crop ends,and scrap,and alloy agents;the non-isothermal conditions;the changes in the amounts of metal and slag during the refining;and other factors were all considered.The model was used to deal with and analyze the austenitic stainless steel making (including ultra-low carbon steel) and was tested on data of 32 heats obtained in producing 304 grade steel in an 18t AOD vessel.The changes in the bath compostion and temperature during the refining process with time can be accurately predicted using this model.The model can provide some very useful information and a reliable basis for optimizing the process practice of the refining of stainless steel and control of the process in real-time and online.
|
| 关 键 词： | 不锈钢 精炼处理 AOD数学模型 脱碳 |
| 收稿时间： | 22 November 2001 |
Physical and mathematical modeling of the argon-oxygen decarburization refining process of stainless steel |
| |
| Ji-He Wei Ph. D..Physical and mathematical modeling of the argon-oxygen decarburization refining process of stainless steel[J].Journal of Shanghai University(English Edition),2002,6(1):1-23. |
| |
| Authors: | Ji-He Wei Ph D |
| |
| Institution: | School of Materials Science and Engineering, Shanghai University, Shanghai 200072, China |
| |
| Abstract: | The available studies in the literature on physical and mathematical modeling of the argon oxygen decarburization (AOD) process of stainless steel have briefly been reviewed. The latest advances made by the author with his research group have been summarized. Water modeling was used to investigate the fluid flow and mixing characteristics in the bath of an 18 t AOD vessel, as well as the "back attack" action of gas jets and its effects on the erosion and wear of the refractory lining, with sufficiently full kinematic similarity. The non rotating and rotating gas jets blown through two annular tuyeres, respectively of straight tube and spiral flat tube type, were employed in the experiments. The geometric similarity ratio between the model and its prototype (including the straight tube type tuyeres) was 1:3. The influences of the gas flow rate, the angle included between the two tuyeres and other operating parameters, and the suitability of the spiral tuyere as a practical application, were examined. These latest studies have clearly and successfully brought to light the fluid flow and mixing characteristics in the bath and the overall features of the back attack phenomena of gas jets during the blowing, and have offered a better understanding of the refining process. Besides, mathematical modeling for the refining process of stainless steel was carried out and a new mathematical model of the process was proposed and developed. The model performs the rate calculations of the refining and the mass and heat balances of the system. Also, the effects of the operating factors, including adding the slag materials, crop ends, and scrap, and alloy agents; the non isothermal conditions; the changes in the amounts of metal and slag during the refining; and other factors were all considered. The model was used to deal with and analyze the austenitic stainless steel making (including ultra low carbon steel) and was tested on data of 32 heats obtained in producing 304 grade steel in an 18 t AOD vessel. The changes in the bath composition and temperature during the refining process with time can be accurately predicted using this model. The model can provide some very useful information and a reliable basis for optimizing the process practice of the refining of stainless steel and control of the process in real time and online. |
| |
| Keywords: | stainless steel argon oxygen decarburization (AOD) process fluid flow and mixing back attack phenomenon non rotating and rotating gas jets decarburization water modeling mathematical modeling |
| 本文献已被 CNKI 维普 万方数据 SpringerLink 等数据库收录！ |
|
