| Q235钢管“603”渗碳后的变形试验研究 |
| |
| 引用本文： | 陆秋君,王均捷,张世洪.Q235钢管“603”渗碳后的变形试验研究[J].科技通报,2001,17(2):59-61. |
| |
| 作者姓名： | 陆秋君 王均捷 张世洪 |
| |
| 作者单位： | 1. 浙江大学农业工程学院,
2. 杭州叉车总厂, |
| |
| 摘 要： | 为解决普通羽毛球拍杆因强度低容易出现折断的现象，经过分析研究和大量试验，采用“603”液体渗碳工艺后直接淬火，再180℃回火的热处理工艺，可使Q235冷拉管制成的羽毛球拍杆具有较好的性能，使用中既不弯曲又不折断，然而存在变形量不同的现象，这是由于渗碳不均匀造成，出现球拍杆的性能有高有低。在实际生产中应及时补充“603”液体，保证炉温和碳浓度均匀一致，以提高羽毛球拍杆性能质量。
|
| 关 键 词： | Q235冷拉钢管 “603”渗碳工艺 弯曲 折断 变形试验 羽毛球拍杆 |
| 文章编号： | 1001-7119(2001)02-0059-03 |
| 修稿时间： | 2000年5月22日 |
Research of Curving Test
on Racket Made of Cold-drawing Q235 Tube after Carbonized in |
| |
| LU Qiu jun ,WANG Jun Jie ,ZHANG Shi hong.Research of Curving Test
on Racket Made of Cold-drawing Q235 Tube after Carbonized in[J].Bulletin of Science and Technology,2001,17(2):59-61. |
| |
| Authors: | LU Qiu jun WANG Jun Jie ZHANG Shi hong |
| |
| Institution: | LU Qiu jun 1,WANG Jun Jie 1,ZHANG Shi hong 2 |
| |
| Abstract: | In order to resolve breaking easily of usual badminton racketbecause of low intensity the following pursuit is done. According to research and a great quantity tests of heat treatment tests, carbonized in “603” liquid and then tempered in 180 centigrade, is applied to racket made of cold-drawing Q235 steel tube. By such heat treatment, racket has better properties, and doesn't curve and break in using. But phenomenon of different distortion exists. Different carbonization consistence bring about this circumstance and made property of badminton racket high or low。In actual producing “603” liquid have to be supplied in time to ensure furnace temperature and carbon deepness equality and coherence and to improve badminton racket performance and quality. |
| |
| Keywords: | |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
