| 板坯连铸机结晶器内流场的有限元分析 |
| |
| 引用本文： | 栗晓,石俊,朱兴元.板坯连铸机结晶器内流场的有限元分析[J].武汉工程职业技术学院学报,2006,18(4):10-13,20. |
| |
| 作者姓名： | 栗晓 石俊 朱兴元 |
| |
| 作者单位： | 1. 武汉工程职业技术学院,武汉,430080
2. 武汉理工大学材料学院,武汉,430070 |
| |
| 摘 要： | 应用有限元分析软件ANSYS热一流场耦舍板块FLOTRAN CFD，模拟了武钢三炼钢板坯结晶器在相同浇铸温度下的流场分布情况。通过ANSYS模拟结果，分析了不同拉坯速度、浸入式水口的插入深度和水口出口张角对结晶器中钢液流场分布状况的影响，从而为提高钢液的清洁度和优化连铸工艺参数提供了依据。
|
| 关 键 词： | 板坯连铸结晶器 流场 有限元 |
| 文章编号： | 1671-3524（2006）04-0010-04 |
| 收稿时间： | 2006-10-18 |
| 修稿时间： | 2006年10月18 |
Finite Element Analysis of the Flow Field in the Mould of Slab Conticaster |
| |
| Li Xiao,Shi Jun,Zhu Xingyuan.Finite Element Analysis of the Flow Field in the Mould of Slab Conticaster[J].Journal of University for Staff and Workers of Wuhan Iron and Steel(Group)Corporation,2006,18(4):10-13,20. |
| |
| Authors: | Li Xiao Shi Jun Zhu Xingyuan |
| |
| Institution: | Li Xiao Shi Jun Zhu Xingyuan |
| |
| Abstract: | The simulation on distribution pattern of flow field in slab mould of the No. 3 Steel Plant, WISCO at the same temperature has been conducted by utilizing the heat-flow field coupling plate. FLOTRANCED of the large scale finite element software ANSYS. The results obtained are then used to analyze the distribution pattern of flow field under different conditions, such as withdrawing speed, penetration depth, field angle of immersed nozzle, etc. , thereby providing basis for improving liquid steel cleanliness and optimizing process parameters of continuous casting. |
| |
| Keywords: | zmould for slab eontieast flow field finite element |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
