首页 | 本学科首页   官方微博 | 高级检索  
     检索      

一种新的印刷电路板浸银镀速的测定方法
引用本文:魏喆良,唐电.一种新的印刷电路板浸银镀速的测定方法[J].福建工程学院学报,2007,5(1):11-14,24.
作者姓名:魏喆良  唐电
作者单位:福州大学材料研究所,福建,福州,350002
基金项目:福建省重点国际合作项目
摘    要:利用先进的电化学系统,通过测定铜-银电偶电流,分别对有无络合剂条件下印刷电路板浸镀银的沉积速度进行测定,并将测定结果与常规的容量滴定法进行对比.结果表明,与常规的容量滴定法相比,采用电偶电流法测定浸镀银的沉积速度,不仅直观、方便、速度快,而且能进行在线检测,有利于及时对印刷电路板的浸银工艺进行调整.

关 键 词:镀速检测  浸镀银  印刷电路板
文章编号:1672-4348(2007)01-0011-04
收稿时间:2006-12-17
修稿时间:2006年12月17

Galvanic current method for measuring electrodeposition velocity of immersion silver plating for printed circuit board
Wei Zheliang,Tang Dian.Galvanic current method for measuring electrodeposition velocity of immersion silver plating for printed circuit board[J].Journal of Fujian University of Technology,2007,5(1):11-14,24.
Authors:Wei Zheliang  Tang Dian
Abstract:The electrodeposition rate of immersion silver plating for printed circuit board(PCB) was measured by galvanic current method via advance electrochemical system.The testing values were compared with those measured by ordinary capacity titration.The result shows that the advantages of galvanic current method over ordinary capacity titration are more direct,convenient,faster and can be tested on-line,being suitable for timely adjusting the technology of immersion silver plating for PCB.
Keywords:electrodeposition rate testing  immersion silver  printed circuit board
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号