|
|||||
|
|
| 微小型车铣加工切屑形态实验研究 | |
| 引用本文： | 刘克非,李月安,李春平,张之敬.微小型车铣加工切屑形态实验研究[J].襄樊学院学报,2007,28(8):52-55. |
| 作者姓名： | 刘克非 李月安 李春平 张之敬 |
| 作者单位： | 1. 襄樊学院,机械工程系,湖北,襄樊,441053 2. 军事经济学院,襄樊分院,湖北,襄樊,441118 3. 北京理工大学,机械与车辆工程学院,北京,100081 |
| 基金项目： | 北京市重点学科建设项目;湖北省教育厅科研项目 |
| 摘 要： | 研究切屑形态的变化有助于掌握切削过程的内在规律.对硬铝材料(2A12)微小型零件进行车铣加工单因素实验,研究切削参数对微小型车铣切屑形态影响.通过实验得到了切屑齿距、切屑宽度随切削参数变化的规律.结果表明,车铣切屑齿距随着切削参数的增加而变大,切屑宽度只对切削深度的变化很敏感. |
| 关 键 词： | 微小型车铣 切削参数 切屑形态 单因素实验 |
| 文章编号： | 1009-2854(2007)08-0052-04 |
| 修稿时间： | 2007年6月13日 |
Experimental Investigation on Chip Formation of Micro Turn-Milling |
|
| LIU Ke-fei,LI Yue-an,LI Chun-ping,ZHANG Zhi-jing.Experimental Investigation on Chip Formation of Micro Turn-Milling[J].Journal of Xiangfan University,2007,28(8):52-55. | |
| Authors: | LIU Ke-fei LI Yue-an LI Chun-ping ZHANG Zhi-jing |
| Institution: | LIU Ke-fei LI Yue-an LI Chun-ping ZHANG Zhi-jing |
| Abstract: | The study and research on the changes of chip deformation will help us master the inherent rules of cutting process.Micro turn-milling machining experiments based on aluminum alloy 2Al2 are carried out.Through the single-factor experiment testing the influence that cutting parameters affect the micro turn-milling chip formation,the relationship of chip tooth pitch and width change rule and cutting parameters is obtained.The result indicates that the regularity between chip tooth pitch change and cutting parameter change appears non-monotropic,and chip width had high sensitivity only to cutting depth. |
| Keywords: | Micro turn-milling Cutting parameter Chip formation Single-factor experiment |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |