| 基于PMAC的大容量G代码加载及同步显示技术研究 |
| |
| 引用本文： | 黎良田.基于PMAC的大容量G代码加载及同步显示技术研究[J].深圳职业技术学院学报,2014(3):38-42. |
| |
| 作者姓名： | 黎良田 |
| |
| 作者单位： | 深圳职业技术学院机电工程学院,广东深圳518055 |
| |
| 基金项目： | 深圳职业技术学院校科研重点资助项目（2210k3020009） |
| |
| 摘 要： | 开放式数控系统软件用户界面的开发,除了一些实时数据的采集与显示外,在数控加工中往往需要进行超大容量G代码加载及G代码的同步高亮显示.本文针对用于薄壁回转体零件测量与加工的专用设备开发的基于PMAC开放式数控系统的实际需要,提出利用分割法进行超大容量G代码程序加载的新方法,同时研究了加工过程中G代码程序的实时同步高亮显示和进度显示技术,使系统得到了优化,提高了系统的稳定性.
|
| 关 键 词： | PMAC 开放式数控系统 G代码加载 同步显示 |
Exceeding G-codes Downloading and Synchronous High-bright Display Technique Based on PMAC |
| |
| LI Liangtian.Exceeding G-codes Downloading and Synchronous High-bright Display Technique Based on PMAC[J].Journal of Shenzhen Polytechnic,2014(3):38-42. |
| |
| Authors: | LI Liangtian |
| |
| Institution: | LI Liangtian ( School of Mechanical and Electrical Engineering, Shenzhen Polytechnic, Shenzhen, Guangdong 518055, China ) |
| |
| Abstract: | PMAC motion controller was widely used in the development of open numerical control system. Various NC system software interfaces, in accordance with the requirements of special machine tools can be developed. Exceeding G-codes program is to be downloaded in the machining processing. In addition, synchronous high-bright display of G-code was necessary. A new method was proposed to allow exceeding G-codes program to be downloaded in this paper. The technology was studied on synchronous high-bright display of G-code and display of progress on the user interface in the machining processing. The software system was optimized by using this technique. |
| |
| Keywords: | PMAC open numerical control G-code download high-bright display |
| 本文献已被 CNKI 维普 等数据库收录！ |
