| 基于UG POST极坐标数控机床后置处理器的开发 |
| |
| 引用本文： | 董晓岚.基于UG POST极坐标数控机床后置处理器的开发[J].苏州市职业大学学报,2008,19(4):26-28. |
| |
| 作者姓名： | 董晓岚 |
| |
| 作者单位： | 苏州市职业大学,机电工程系,江苏,苏州,215104 |
| |
| 摘 要： | 数控机床的控制系统、控制方式不同，G代码程序格式和指令方式也不同。极坐标数控机床接受“G01X，Z，C”格式的极坐标指令，完成C轴旋转坐标和Z轴线性坐标的合成运动轨迹一阿基米德螺线轨迹运动。通过UG后置处理开发工具POST Builder完成对极坐标数控机床后置处理文件的定制，实现极坐标指令格式、动作事件、文件格式的处理。
|
| 关 键 词： | 极坐标 后置处理 刀位轨迹文件 G代码程序 |
The Application of Special Post-processor for Polar-coordinate NC Tool Based on UG Post |
| |
| DONG Xiao-lan.The Application of Special Post-processor for Polar-coordinate NC Tool Based on UG Post[J].Journal of Suzhou Vocational University,2008,19(4):26-28. |
| |
| Authors: | DONG Xiao-lan |
| |
| Institution: | DONG Xiao-lan (Suzhou Vocational University, Suzhou 215104, China) |
| |
| Abstract: | Different NC systems and control fundamentals acquire different G code format and instruction mode. Polar-coordinate NC Tool accept ＇G01 X,Z,C＇ instruction to complete a resultant Archimedes Spiral trails, Which is composed of a rotational coordinate （C Axis）and a linear motion （Z Axis）. The paper custom-tailors a polar-coordinate NC tool post-processor under the UG development tool, so that a polar-coordinate set of code instructions, motion event definitions and file formats are accomplished. |
| |
| Keywords: | polar-coordinate post-process CLSF file G code file |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
