| 基于ANSYS的自动扶梯金属骨架强度分析及优化设计 |
| |
| 引用本文： | 付春平.基于ANSYS的自动扶梯金属骨架强度分析及优化设计[J].苏州市职业大学学报,2009,20(4):39-41. |
| |
| 作者姓名： | 付春平 |
| |
| 作者单位： | 苏州市职业大学,机电工程系,江苏,苏州,215104 |
| |
| 基金项目： | 江苏省六大人才高峰行动计划资助项目，江苏省教育厅资助项目 |
| |
| 摘 要： | 利用ANSYS软件建立FEH公共交通型自动扶梯金属结构有限元分析模型，针对自动扶梯的特点对载荷进行分析，将载荷和约束施加于自动扶梯模型之上，通过软件计算出最大应力和最大应变值，以此判定是否满足标准要求，为FEH公共交通型金属结构的设计提供理论基础，也为降低成本提供参考依据．
|
| 关 键 词： | 自动扶梯 金属骨架 有限元 |
The Analysis and Optimization of the Escalator's Truss Based on ANSYS |
| |
| FU Chun-ping.The Analysis and Optimization of the Escalator''s Truss Based on ANSYS[J].Journal of Suzhou Vocational University,2009,20(4):39-41. |
| |
| Authors: | FU Chun-ping |
| |
| Institution: | FU Chun-ping (Department of Mechano-electronic Engineering, Suzhou Vocational University, Suzhou 215104, China) |
| |
| Abstract: | The finite element model of metal structure of FEH escalator was built with ANSYS software. Characteristics, load calculation and load combinations of the escalator were discussed. The software can show the biggest stress and distortion, which the engineer can compare with the standard requirement. It provided a theoretical basis for escalator metal structure design and material choosing. |
| |
| Keywords: | escalator truss finite element |
| 本文献已被 维普 万方数据 等数据库收录！ |
