| 基于MPI的注塑模分析前处理及优化设计的实现 |
| |
| 引用本文： | 曾亚森,梁飞华,莫才颂,刘好.基于MPI的注塑模分析前处理及优化设计的实现[J].茂名学院学报,2006,16(4):51-55. |
| |
| 作者姓名： | 曾亚森 梁飞华 莫才颂 刘好 |
| |
| 作者单位： | 茂名学院机电工程学院,广东,茂名,525000 |
| |
| 摘 要： | 比较应用CAD/CAE/CAM技术的注塑模设计制造方法与传统模具设计制造过程,说明MPI作用与在优化设计中的地位;MPI对注塑模进行模流分析,建立在以网格划分及修改为主要内容的分析前处理基础上进行,通过一实例在MPI环境下对模型网格划分及修改,并根据注塑模工艺过程参数,进行最佳浇口位置的分析与浇口位置确定,说明应用MPI可实现注塑模设计优化。
|
| 关 键 词： | MPI 注塑模 网格划分及修改 浇口位置 |
| 文章编号： | 1671-6590（2006）04-0051-05 |
| 收稿时间： | 2006-04-29 |
| 修稿时间： | 2006-05-22 |
Injection Mold Analytical front Processing and Optimization Design Based on MPI |
| |
| ZENG Ya-sen,LIANG Fei-hua,MO Cai-song,LIU Hao.Injection Mold Analytical front Processing and Optimization Design Based on MPI[J].Journal of Maoming College,2006,16(4):51-55. |
| |
| Authors: | ZENG Ya-sen LIANG Fei-hua MO Cai-song LIU Hao |
| |
| Abstract: | beginning with comparing CAD/CAE/CAM with traditional injection mold design and manufacture,this paper is intended to discuss the function and status of MPI in optimization design.Injection mold flow is analyzed with MPI,based on mesh generation and front Processing.For example,with mesh generation and modification in MPI,the basis of injection process settings,the best gate location is analyzed and thus determined,which shows that injection mold optimization design can be realized by MPI. |
| |
| Keywords: | MPI injection mold mesh generation and modification gate location |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
