| 基于有限元的护套线剥线机刀架疲劳强度分析 |
| |
| 引用本文： | 康鹏桂,彭善飞,周克媛,张科.基于有限元的护套线剥线机刀架疲劳强度分析[J].北京工业职业技术学院学报,2020(1):15-17,41. |
| |
| 作者姓名： | 康鹏桂 彭善飞 周克媛 张科 |
| |
| 作者单位： | 青岛理工大学琴岛学院;中车集团青岛四方机车车辆股份有限公司;北京工业职业技术学院机电工程学院;内蒙古科技大学 |
| |
| 基金项目： | 2018年度山东省教育厅山东省高等科技计划项目(J18KA051) |
| |
| 摘 要： | 应用SolidWorks软件建立护套线剥线机主传动机构刀架三维实体模型,根据剥线机工作时的受力情况,利用有限元软件对刀架进行静力学和疲劳强度分析,获得刀架各项静力学参数图和疲劳寿命情况。该分析结果为护套线剥线机的设计提供理论依据,也为后续剥线机结构优化提供了技术支持。
|
| 关 键 词： | 护套线 剥线机 刀架 有限元 疲劳强度 |
Fatigue Strength Analysis of Tool Holder of Sheathed Wire Stripper Based on Finite Element |
| |
| KANG Penggui,PENG Shanfei,ZHOU Keyuan,ZHANG Ke.Fatigue Strength Analysis of Tool Holder of Sheathed Wire Stripper Based on Finite Element[J].Journal of beijing vocational & technical institute of industry,2020(1):15-17,41. |
| |
| Authors: | KANG Penggui PENG Shanfei ZHOU Keyuan ZHANG Ke |
| |
| Institution: | (Qingdao Technological University Qindao College,Qingdao Shandong 266091,China;Qingdao Sifang Locomotive and Rolling Stock Co.,Ltd.,Qingdao Shandong 266111,China;School of Electromechanical Engineering,Beijing Polytechnic College,Beijing 100042,China;Inner Mongolia University of Science and Technology,Baotou Inner Mongolia 014010,China) |
| |
| Abstract: | A three-dimensional solid model of the tool holder of the main transmission mechanism of the sheathed wire stripper is established by using SolidWorks software.According to the stress conditions of the stripper during operation,the static and fatigue strength analysis of the tool holder is carried out by using the finite element software,and the static parameter diagrams and fatigue life conditions of the tool holder are obtained.The analysis results provide theoretical basis for the design of sheath wire stripper and technical support for the structural optimization of subsequent strippers. |
| |
| Keywords: | sheathing line stripping machine tool carrier finite element fatigue strength |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
