首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 107 毫秒
1.
The applications of item response theory (IRT) models assume local item independence and that examinees are independent of each other. When a representative sample for psychometric analysis is selected using a cluster sampling method in a testlet‐based assessment, both local item dependence and local person dependence are likely to be induced. This study proposed a four‐level IRT model to simultaneously account for dual local dependence due to item clustering and person clustering. Model parameter estimation was explored using the Markov Chain Monte Carlo method. Model parameter recovery was evaluated in a simulation study in comparison with three other related models: the Rasch model, the Rasch testlet model, and the three‐level Rasch model for person clustering. In general, the proposed model recovered the item difficulty and person ability parameters with the least total error. The bias in both item and person parameter estimation was not affected but the standard error (SE) was affected. In some simulation conditions, the difference in classification accuracy between models could go up to 11%. The illustration using the real data generally supported model performance observed in the simulation study.  相似文献   

2.
This study demonstrated the equivalence between the Rasch testlet model and the three‐level one‐parameter testlet model and explored the Markov Chain Monte Carlo (MCMC) method for model parameter estimation in WINBUGS. The estimation accuracy from the MCMC method was compared with those from the marginalized maximum likelihood estimation (MMLE) with the expectation‐maximization algorithm in ConQuest and the sixth‐order Laplace approximation estimation in HLM6. The results indicated that the estimation methods had significant effects on the bias of the testlet variance and ability variance estimation, the random error in the ability parameter estimation, and the bias in the item difficulty parameter estimation. The Laplace method best recovered the testlet variance while the MMLE best recovered the ability variance. The Laplace method resulted in the smallest random error in the ability parameter estimation while the MCMC method produced the smallest bias in item parameter estimates. Analyses of three real tests generally supported the findings from the simulation and indicated that the estimates for item difficulty and ability parameters were highly correlated across estimation methods.  相似文献   

3.
Testlet effects can be taken into account by incorporating specific dimensions in addition to the general dimension into the item response theory model. Three such multidimensional models are described: the bi-factor model, the testlet model, and a second-order model. It is shown how the second-order model is formally equivalent to the testlet model. In turn, both models are constrained bi-factor models. Therefore, the efficient full maximum likelihood estimation method that has been established for the bi-factor model can be modified to estimate the parameters of the two other models. An application on a testlet-based international English assessment indicated that the bi-factor model was the preferred model for this particular data set.  相似文献   

4.
Wei Tao  Yi Cao 《教育实用测度》2013,26(2):108-121
ABSTRACT

Current procedures for equating number-correct scores using traditional item response theory (IRT) methods assume local independence. However, when tests are constructed using testlets, one concern is the violation of the local item independence assumption. The testlet response theory (TRT) model is one way to accommodate local item dependence. This study proposes methods to extend IRT true score and observed score equating methods to the dichotomous TRT model. We also examine the impact of local item dependence on equating number-correct scores when a traditional IRT model is applied. Results of the study indicate that when local item dependence is at a low level, using the three-parameter logistic model does not substantially affect number-correct equating. However, when local item dependence is at a moderate or high level, using the three-parameter logistic model generates larger equating bias and standard errors of equating compared to the TRT model. However, observed score equating is more robust to the violation of the local item independence assumption than is true score equating.  相似文献   

5.
C‐tests are a specific variant of cloze tests that are considered time‐efficient, valid indicators of general language proficiency. They are commonly analyzed with models of item response theory assuming local item independence. In this article we estimated local interdependencies for 12 C‐tests and compared the changes in item difficulties, reliability estimates, and person parameter estimates for different modeling approaches: (a) Rasch, (b) testlet, (c) partial credit, and (d) copula models. The results are complemented with findings of a simulation study in which sample size, number of testlets, and strength of residual correlations between items were systematically manipulated. Results are discussed with regard to the pivotal question whether residual dependencies between items are an artifact or part of the construct.  相似文献   

6.
The presence of nuisance dimensionality is a potential threat to the accuracy of results for tests calibrated using a measurement model such as a factor analytic model or an item response theory model. This article describes a mixture group bifactor model to account for the nuisance dimensionality due to a testlet structure as well as the dimensionality due to differences in patterns of responses. The model can be used for testing whether or not an item functions differently across latent groups in addition to investigating the differential effect of local dependency among items within a testlet. An example is presented comparing test speededness results from a conventional factor mixture model, which ignores the testlet structure, with results from the mixture group bifactor model. Results suggested the 2 models treated the data somewhat differently. Analysis of the item response patterns indicated that the 2-class mixture bifactor model tended to categorize omissions as indicating speededness. With the mixture group bifactor model, more local dependency was present in the speeded than in the nonspeeded class. Evidence from a simulation study indicated the Bayesian estimation method used in this study for the mixture group bifactor model can successfully recover generated model parameters for 1- to 3-group models for tests containing testlets.  相似文献   

7.
Four item response theory (IRT) models were compared using data from tests where multiple items were grouped into testlets focused on a common stimulus. In the bi-factor model each item was treated as a function of a primary trait plus a nuisance trait due to the testlet; in the testlet-effects model the slopes in the direction of the testlet traits were constrained within each testlet to be proportional to the slope in the direction of the primary trait; in the polytomous model the item scores were summed into a single score for each testlet; and in the independent-items model the testlet structure was ignored. Using the simulated data, reliability was overestimated somewhat by the independent-items model when the items were not independent within testlets. Under these nonindependent conditions, the independent-items model also yielded greater root mean square error (RMSE) for item difficulty and underestimated the item slopes. When the items within testlets were instead generated to be independent, the bi-factor model yielded somewhat higher RMSE in difficulty and slope. Similar differences between the models were illustrated with real data.  相似文献   

8.
It is sometimes sensible to think of the fundamental unit of test construction as being larger than an individual item. This unit, dubbed the testlet, must pass muster in the same way that items do. One criterion of a good item is the absence of DIF–the item must function in the same way in all important subpopulations of examinees. In this article, we define what we mean by testlet DIF and provide a statistical methodology to detect it. This methodology parallels the IRT-based likelihood ratio procedures explored previously by Thissen, Steinberg, and Wainer (1988, in press). We illustrate this methodology with analyses of data from a testlet-based experimental version of the Scholastic Aptitude Test (SAT).  相似文献   

9.
Using a New Statistical Model for Testlets to Score TOEFL   总被引：1，自引：0，他引：1  
Standard item response theory (IRT) models fit to examination responses ignore the fact that sets of items (testlets) often are matched with a single common stimulus (e.g., a reading comprehension passage). In this setting, all items given to an examinee are unlikely to be conditionally independent (given examinee proficiency). Models that assume conditional independence will overestimate the precision with which examinee proficiency is measured. Overstatement of precision may lead to inaccurate inferences as well as prematurely ended examinations in which the stopping rule is based on the estimated standard error of examinee proficiency (e.g., an adaptive test). The standard three parameter IRT model was modified to include an additional random effect for items nested within the same testlet (Wainer, Bradlow, & Du, 2000). This parameter, γ characterizes the amount of local dependence in a testlet.
We fit 86 TOEFL testlets (50 reading comprehension and 36 listening comprehension) with the new model, and obtained a value for the variance of γ for each testlet. We compared the standard parameters (discrimination (a), difficulty (b) and guessing (c)) with what is obtained through traditional modeling. We found that difficulties were well estimated either way, but estimates of both a and c were biased if conditional independence is incorrectly assumed. Of greater import, we found that test information was substantially over-estimated when conditional independence was incorrectly assumed.  相似文献   

10.
C-tests are gap-filling tests widely used to assess general language proficiency for purposes of placement, screening, or provision of feedback to language learners. C-tests consist of several short texts in which parts of words are missing. We addressed the issue of local dependence in C-tests using an explicit modeling approach based on testlet response theory. Data were provided by a total sample of 4,708 participants working on eight C-test texts with 20 gaps each. The resulting parameter estimates were compared to those obtained from (a) a polytomous item response theory (IRT) model and (b) a standard IRT model that ignored the dependence structure. Testlet effects proved to be very small and correspondence between parameters obtained from the different modeling approaches was high. When local dependence was ignored reliability of the C-test was slightly overestimated. Implications for the analysis of testlets in general, and C-tests in particular are discussed.  相似文献   

11.
In teaching, representations are used as ways to illustrate the concepts underlying a specific topic. For example, use symbols (e.g., 1?+?2?=?3) to express the concept of addition. To compare students’ abilities to interpret different representations in mathematics, the symbolic representation (SR) test and the pictorial representation (PR) test were designed, and then administered to 681 sixth graders in Taipei, Taiwan. This study adopts two different modeling perspectives, the testlet perspective and the multi-ability perspective, to analyze this SR and PR test data in the context of item response theory. The main results show that:
  1. Students scored on average significantly higher on the SR test than the PR test.
  2. The effects of the item stem testlets could be large, but they are statistically non-significant; however, the influence of the number of items in the testlet should also be considered.
  3. The nature of the option representations, SR and PR, represents two different mathematics abilities.
  4. The main factor that influences students’ item responses is students’ abilities to interpret SR and PR, and the testlet effects generated from the shared item stem can be ignored.
  5. Regarding the parameter estimates of the best-fitting model: (a) the person ability variance estimates show that the ability distributions on the SR and PR dimension may not be the same, (b) the correlation estimate between the SR and PR dimension indicates that these two abilities are moderately correlated, and (c) the item difficulty estimates for different models are similar.
Suggestions for teaching practice and future studies are provided in the Conclusion.  相似文献   

12.
The examinee‐selected‐item (ESI) design, in which examinees are required to respond to a fixed number of items in a given set of items (e.g., choose one item to respond from a pair of items), always yields incomplete data (i.e., only the selected items are answered and the others have missing data) that are likely nonignorable. Therefore, using standard item response theory models, which assume ignorable missing data, can yield biased parameter estimates so that examinees taking different sets of items to answer cannot be compared. To solve this fundamental problem, in this study the researchers utilized the specific objectivity of Rasch models by adopting the conditional maximum likelihood estimation (CMLE) and pairwise estimation (PE) methods to analyze ESI data, and conducted a series of simulations to demonstrate the advantages of the CMLE and PE methods over traditional estimation methods in recovering item parameters in ESI data. An empirical data set obtained from an experiment on the ESI design was analyzed to illustrate the implications and applications of the proposed approach to ESI data.  相似文献   

13.
In the presence of test speededness, the parameter estimates of item response theory models can be poorly estimated due to conditional dependencies among items, particularly for end‐of‐test items (i.e., speeded items). This article conducted a systematic comparison of five‐item calibration procedures—a two‐parameter logistic (2PL) model, a one‐dimensional mixture model, a two‐step strategy (a combination of the one‐dimensional mixture and the 2PL), a two‐dimensional mixture model, and a hybrid model‐–by examining how sample size, percentage of speeded examinees, percentage of missing responses, and way of scoring missing responses (incorrect vs. omitted) affect the item parameter estimation in speeded tests. For nonspeeded items, all five procedures showed similar results in recovering item parameters. For speeded items, the one‐dimensional mixture model, the two‐step strategy, and the two‐dimensional mixture model provided largely similar results and performed better than the 2PL model and the hybrid model in calibrating slope parameters. However, those three procedures performed similarly to the hybrid model in estimating intercept parameters. As expected, the 2PL model did not appear to be as accurate as the other models in recovering item parameters, especially when there were large numbers of examinees showing speededness and a high percentage of missing responses with incorrect scoring. Real data analysis further described the similarities and differences between the five procedures.  相似文献   

14.
In psychological research, available data are often insufficient to estimate item factor analysis (IFA) models using traditional estimation methods, such as maximum likelihood (ML) or limited information estimators. Bayesian estimation with common-sense, moderately informative priors can greatly improve efficiency of parameter estimates and stabilize estimation. There are a variety of methods available to evaluate model fit in a Bayesian framework; however, past work investigating Bayesian model fit assessment for IFA models has assumed flat priors, which have no advantage over ML in limited data settings. In this paper, we evaluated the impact of moderately informative priors on ability to detect model misfit for several candidate indices: posterior predictive checks based on the observed score distribution, leave-one-out cross-validation, and widely available information criterion (WAIC). We found that although Bayesian estimation with moderately informative priors is an excellent aid for estimating challenging IFA models, methods for testing model fit in these circumstances are inadequate.  相似文献   

15.
The primary purpose of this study was to investigate the appropriateness and implication of incorporating a testlet definition into the estimation of procedures of the conditional standard error of measurement (SEM) for tests composed of testlets. Another purpose was to investigate the bias in estimates of the conditional SEM when using item-based methods instead of testlet-based methods. Several item-based and testlet-based estimation methods were proposed and compared. In general, item-based estimation methods underestimated the conditional SEM for tests composed for testlets, and the magnitude of this negative bias increased as the degree of conditional dependence among items within testlets increased. However, an item-based method using a generalizability theory model provided good estimates of the conditional SEM under mild violation of the assumptions for measurement modeling. Under moderate or somewhat severe violation, testlet-based methods with item response models provided good estimates.  相似文献   

16.
Earlier (Wainer & Lewis, 1990), we reported the initial development of a testlet-based algebra test. In this account, we provide the details of this excursion into the use of testlets. A pretest of two 15–item algebra tests was carried out in which examinees' performance on a 4-item subset of each test (a 4–item testlet) was used to predict performance on the entire test. Two models for constructing the testlets were considered: hierarchical (adaptive) and linear (fixed format). These models are compared with each other. It was found on cross–validation that, although an adaptive testlet is superior to a fixed format testlet, this superiority is modest, whereas the potential cost of that superiority is considerable. It was concluded that in circumstances similar to those we report a fixed format testlet that uses the best items in a pool can do almost as well as the optimal adaptive testlet of equal length from that same pool.  相似文献   

17.
The usefulness of item response theory (IRT) models depends, in large part, on the accuracy of item and person parameter estimates. For the standard 3 parameter logistic model, for example, these parameters include the item parameters of difficulty, discrimination, and pseudo-chance, as well as the person ability parameter. Several factors impact traditional marginal maximum likelihood (ML) estimation of IRT model parameters, including sample size, with smaller samples generally being associated with lower parameter estimation accuracy, and inflated standard errors for the estimates. Given this deleterious impact of small samples on IRT model performance, use of these techniques with low-incidence populations, where it might prove to be particularly useful, estimation becomes difficult, especially with more complex models. Recently, a Pairwise estimation method for Rasch model parameters has been suggested for use with missing data, and may also hold promise for parameter estimation with small samples. This simulation study compared item difficulty parameter estimation accuracy of ML with the Pairwise approach to ascertain the benefits of this latter method. The results support the use of the Pairwise method with small samples, particularly for obtaining item location estimates.  相似文献   

18.
As low-stakes testing contexts increase, low test-taking effort may serve as a serious validity threat. One common solution to this problem is to identify noneffortful responses and treat them as missing during parameter estimation via the effort-moderated item response theory (EM-IRT) model. Although this model has been shown to outperform traditional IRT models (e.g., two-parameter logistic [2PL]) in parameter estimation under simulated conditions, prior research has failed to examine its performance under violations to the model’s assumptions. Therefore, the objective of this simulation study was to examine item and mean ability parameter recovery when violating the assumptions that noneffortful responding occurs randomly (Assumption 1) and is unrelated to the underlying ability of examinees (Assumption 2). Results demonstrated that, across conditions, the EM-IRT model provided robust item parameter estimates to violations of Assumption 1. However, bias values greater than 0.20 SDs were observed for the EM-IRT model when violating Assumption 2; nonetheless, these values were still lower than the 2PL model. In terms of mean ability estimates, model results indicated equal performance between the EM-IRT and 2PL models across conditions. Across both models, mean ability estimates were found to be biased by more than 0.25 SDs when violating Assumption 2. However, our accompanying empirical study suggested that this biasing occurred under extreme conditions that may not be present in some operational settings. Overall, these results suggest that the EM-IRT model provides superior item and equal mean ability parameter estimates in the presence of model violations under realistic conditions when compared with the 2PL model.  相似文献   

19.
Even though Bayesian estimation has recently become quite popular in item response theory (IRT), there is a lack of works on model checking from a Bayesian perspective. This paper applies the posterior predictive model checking (PPMC) method ( Guttman, 1967 ; Rubin, 1984 ), a popular Bayesian model checking tool, to a number of real applications of unidimensional IRT models. The applications demonstrate how to exploit the flexibility of the posterior predictive checks to meet the need of the researcher. This paper also examines practical consequences of misfit, an area often ignored in educational measurement literature while assessing model fit.  相似文献   

20.
Previous assessments of the reliability of test scores for testlet-composed tests have indicated that item-based estimation methods overestimate reliability. This study was designed to address issues related to the extent to which item-based estimation methods overestimate the reliability of test scores composed of testlets and to compare several estimation methods for different measurement models using simulation techniques. Three types of estimation approach were conceptualized for generalizability theory (GT) and item response theory (IRT): item score approach (ISA), testlet score approach (TSA), and item-nested-testlet approach (INTA). The magnitudes of overestimation when applying item-based methods ranged from 0.02 to 0.06 and were related to the degrees of dependence among within-testlet items. Reliability estimates from TSA were lower than those from INTA due to the loss of information with IRT approaches. However, this could not be applied in GT. Specified methods in IRT produced higher reliability estimates than those in GT using the same approach. Relatively smaller magnitudes of error in reliability estimates were observed for ISA and for methods in IRT. Thus, it seems reasonable to use TSA as well as INTA for both GT and IRT. However, if there is a relatively large dependence among within-testlet items, INTA should be considered for IRT due to nonnegligible loss of information.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号