首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
ABSTRACT

This study identified the effect of badminton lunging directions on impact characteristics, joint kinetics and measurement reliability. A total of 14 badminton players performed 20 lunges in both forehand and backhand sides. Ground reaction force (GRF) and three-dimensional joint moment variables were determined for further analyses. Paired t-tests and Wilcoxon signed-rank tests were performed to determine any differences between the two lunge directions and intra-class correlation (ICC) and sequential averaging analysis (SAA) were used to estimate the minimum number of trials. Compared to the forehand side, participants experienced significantly larger total GRF impulse (+ 3.8%, p = 0.021) and transverse moment (hip + 63.5%, p < 0.001; knee + 80.7%, p = 0.011), but smaller hip (?7.7%), knee (?18.7%) and ankle frontal moments (?58.0%, p < 0.05) in backhand lunges. The minimum number of trials was similar for both lunge directions, as the averaged absolute differences was less than one in both ICC and SAA. Furthermore, smaller minimal number of trials was determined by the ICC (7.9–8.0), compared with the SAA approach (9.5–10.3). Lunge direction would influence GRF and joint loading, but not on the measurement reliability. These results give important insights to establish performance or equipment evaluation protocols during badminton lunges.  相似文献   

2.
Abstract

The lunge is regularly used in badminton and is recognized for the high physical demands it places on the lower limbs. Despite its common occurrence, little information is available on the biomechanics of lunging in the singles game. A video-based pilot study confirmed the relatively high frequency of lunging, ～15% of all movements, in competitive singles games. The biomechanics and performance characteristics of three badminton-specific lunge tasks (kick, step-in, and hop lunge) were investigated in the laboratory with nine experienced male badminton players. Ground reaction forces and kinematic data were collected and lower limb joint kinetics calculated using an inverse dynamics approach. The step-in lunge was characterized by significantly lower mean horizontal reaction force at drive-off and lower mean peak hip joint power than the kick lunge. The hop lunge resulted in significantly larger mean reaction forces during loading and drive-off phases, as well as significantly larger mean peak ankle joint moments and knee and ankle joint powers than the kick or step-in lunges. These findings indicate that, within the setting of this investigation, the step-in lunge may be beneficial for reducing the muscular demands of lunge recovery and that the hop lunge allows for higher positive power output, thereby presenting an efficient lunging method.  相似文献   

3.
The contribution of core neuromuscular control to the dynamic stability of badminton players with and without knee pain during backhand lunges has not been investigated. Accordingly, this study compared the kinematics of the lower extremity, the trunk movement, the muscle activation and the balance performance of knee-injured and knee-uninjured badminton players when performing backhand stroke diagonal lunges. Seventeen participants with chronic knee pain (injured group) and 17 healthy participants (control group) randomly performed two diagonal backhand lunges in the forward and backward directions, respectively. This study showed that the injured group had lower frontal and horizontal motions of the knee joint, a smaller hip–shoulder separation angle and a reduced trunk tilt angle. In addition, the injured group exhibited a greater left paraspinal muscle activity, while the control group demonstrated a greater activation of the vastus lateralis, vastus medialis and medial gastrocnemius muscle groups. Finally, the injured group showed a smaller distance between centre of mass (COM) and centre of pressure, and a lower peak COM velocity when performing the backhand backward lunge tasks. In conclusion, the injured group used reduced knee and trunk motions to complete the backhand lunge tasks. Furthermore, the paraspinal muscles contributed to the lunge performance of the individuals with knee pain, whereas the knee extensors and ankle plantar flexor played a greater role for those without knee pain.  相似文献   

4.
For fencing, speed of the lunge is considered critical to success. The aim of this study is to investigate determinants of lunge speed based on biomechanics. Ground reaction force (GRF) and three-dimensional kinematic data were collected from 7 elite fencers and 12 intermediate-level fencers performing maximum-effort lunges. The results showed that elite fencers acquired a higher horizontal peak velocity of the centre of gravity (HPV) and concomitantly a higher horizontal peak GRF exerted by rear leg (PGRF) than intermediate-level fencers (P?P?P?P?≤?.05). Our findings suggest that training aimed at enhancing strength and power of rear knee extensors is important for fencers to improve speed of the lunge. Also, increasing the extension of rear knee during the lunge, at the same time decreasing the flexion of the forward knee before extension are positive for lunge performance.  相似文献   

5.
ABSTRACT

Unstable footwear may enhance training effects to the lower-limb musculature and sensorimotor system during dynamic gym movements. This study compared the instability of an unstable shoe with irregular midsole deformations (IM) and a control shoe (CS) during forward and lateral lunges. Seventeen female gym class participants completed two sets of ten forward and lateral lunges in CS and IM. Ground reaction forces, lower-limb kinematics and ankle muscle activations were recorded. Variables around initial ground contact, toe-off, descending and ascending lunge phases were compared statistically (p < .05). Responses to IM compared to CS were similar across lunge directions. The IM induced instability by increasing the vertical loading rate (p < .001, p = .009) and variability of frontal ankle motion during descending (p = .001, p < .001) and ascending phases (p = .150, p = .003), in forward and lateral lunges, respectively. At initial ground contact, ankle adjustments enhanced postural stability in IM. Across muscles, there were no activation increases, although results indicate peroneus longus activations increased in IM during the ascending phase. As expected, IM provided a more demanding training stimulus during lunge exercises and has potential to reduce ankle injuries by training ankle positioning for unpredictable instability.  相似文献   

6.
采用即时红外高速摄影技术及三维测力台同步采集7名优秀羽毛球运动员蹬跨步上网接球动作的三维运动学及动力学数据,并计算各关节角参量、力矩和下肢关节肌群功率变化特征。研究结果表明：髋关节屈肌群、膝关节伸肌群、踝关节屈肌群的快速做功能力对羽毛球运动中蹬跨步上网具有极其重要的影响。同时,膝关节屈肌群的能力对跨步蹬跨步上网避免股后肌群的损伤具有不可忽视的作用,在训练中要加强对股后肌群的专项化力量训练。  相似文献   

7.
This study presents the kinematics and plantar pressure characteristics of eight elite national-level badminton athletes and eight recreational college-level badminton players while performing a right-forward lunge movement in a laboratory-simulated badminton court. The hypothesis was that recreational players would be significantly different from elite players in kinematics and plantar pressure measures. Vicon® motion capture and Novel® insole plantar pressure measurement were simultaneously taken to record the lower extremity kinematics and foot loading during stance. Recreational players showed significantly higher peak pressure in the lateral forefoot (P = 0.002) and force time integral in the lateral forefoot (P = 0.013) and other toes (P = 0.005). Elite athletes showed higher peak pressure in the medial forefoot (P = 0.003), hallux (P = 0.037) and force time integral in the medial forefoot (P = 0.009). The difference in landing techniques for the lunge step between elite athletes and recreational players was observed with peak ankle eversion (?38.2°±2.4° for athletes and ?11.1°±3.9° for players, P = 0.015); smaller knee range of motion in the coronal and transverse planes, with differences in peak knee adduction (28.9°±6.8° for athletes and 15.7°±6.2° for players, P = 0.031); peak knee internal rotation (20.3°±1.3° for athletes and 11.8°±3.2° for players, P = 0.029) and peak hip flexion (77.3°±4.1° for athletes and 91.3°±9.3° for players, P = 0.037).  相似文献   

8.
Multiple playing surfaces and footwear used in American football warrant a better understanding of relationship between different combinations of turf and footwear. The purpose of this study was to examine effects of shoe and stud types on ground reaction force (GRF) and ankle and knee kinematics of a 180° cut and a single-leg 90° land-cut on synthetic turf. Fourteen recreational football players performed five trials of the 180° cut and 90° land-cut in three shoe conditions: non-studded running shoe, and football shoe with natural and synthetic turf studs. Variables were analyzed with a 3 × 2 (shoe × movement) repeated measures analysis of variance (p < 0.05). Peak vertical GRF (p < 0.001) and loading rate (p < 0.001) were greater during 90° land-cut than 180° cut. For 180° cut, natural turf studs produced smaller peak medial GRFs compared to synthetic turf studs and non-studded shoe (p = 0.012). For land-cut, peak eversion velocity was reduced in running shoes compared to natural (p = 0.016) and synthetic (p = 0.002) turf studs. The 90° land-cut movement resulted in greater peak vertical GRF and loading rate compared to the 180° cut. Overall, increased GRFs in the 90° land-cut movement may increase the chance of injury.  相似文献   

9.
Abstract

Weight-bearing activity has been shown to increase bone mineral density. Our purpose was to measure vertical ground reaction forces (GRFs) during cyclocross-specific activities and compute their osteogenic index (OI). Twenty-five healthy cyclocross athletes participated. GRF was measured using pressure-sensitive insoles during seated and standing cycling and four cyclocross-specific activities: barrier flat, barrier uphill, uphill run-up, downhill run-up. Peak and mean GRF values, according to bodyweight, were determined for each activity. OI was computed using peak GRF and number of loading cycles. GRF and OI were compared across activities using repeated-measures ANOVA. Number of loading cycles per activity was 6(1) for barrier flat, 8(1) barrier uphill, 7(1) uphill run-up, 12(3) downhill run-up. All activities had significantly (P < 0.01) higher peak GRF, mean GRF values and OI when compared to both seated and standing cycling. The barrier flat condition (P < 0.01) had highest peak (2.9 times bodyweight) and mean GRF values (2.3 times bodyweight). Downhill run-up (P < 0.01) had the highest OI (6.5). GRF generated during the barrier flat activity is similar in magnitude to reported GRFs during running and hopping. Because cyclocross involves weight bearing components, it may be more beneficial to bone health than seated road cycling.  相似文献   

10.
  相似文献   

11.
Abstract

Elite badminton requires muscular endurance combined with appropriate maximal and explosive muscle strength. The musculature of the lower extremities is especially important in this context since rapid and forceful movements with the weight of the body are performed repeatedly throughout a match. In the present study, we examined various leg-strength parameters of 35 male elite badminton players who had been performing resistance exercises as part of their physical training for several years. The badminton players were compared with an age-matched reference group, the members of whom were physically active on a recreational basis, and to the same reference group after they had performed resistance training for 14 weeks. Maximal muscle strength of the knee extensor (quadriceps) and flexor muscles (hamstrings) was determined using isokinetic dynamometry. To measure explosive muscle strength, the contractile rate of force development was determined during maximal isometric muscle contractions. In general, the badminton players showed greater maximal muscle strength and contractile rate of force development than the reference group: mean quadriceps peak torque during slow concentric contraction: 3.69 Nm · kg?1, s=0.08 vs. 3.26 Nm · kg?1, s=0.8 (P<0.001); mean hamstring peak torque during slow concentric contraction: 1.86 Nm · kg?1, s=0.04 vs. 1.63 Nm · kg?1, s=0.04 (P<0.001); mean quadriceps rate of force development at 100 ms: 24.4 Nm · s?1·kg?1, s=0.5 vs. 22.1 Nm·s?1 · kg?1, s=0.6 (P<0.05); mean hamstring rate of force development at 100 ms: 11.4 Nm · s?1·kg?1, s=0.3 vs. 8.9 Nm · s?1 · kg?1, s=0.4 (P<0.05). However, after 14 weeks of resistance training the reference group achieved similar isometric and slow concentric muscle strength as the badminton players, although the badminton players still had a higher isometric rate of force development and muscle strength during fast (240° · s?1) quadriceps contractions. Large volumes of concurrent endurance training could have attenuated the long-term development of maximal muscle strength in the badminton players. The badminton players had a higher contractile rate of force development than the reference group before and after resistance training. Greater explosive muscle strength in the badminton players might be a physiological adaptation to their badminton training.  相似文献   

12.
This study investigated whether an increase in the forefoot bending stiffness of a badminton shoe would positively affect agility, comfort and biomechanical variables during badminton-specific movements. Three shoe conditions with identical shoe upper and sole designs with different bending stiffness (Flexible, Regular and Stiff) were used. Elite male badminton players completed an agility test on a standard badminton court involving consecutive lunges in six directions, a comfort test performed by a pair of participants conducting a game-like practice trial and a biomechanics test involving a random assignment of consecutive right forward lunges. No significant differences were found in agility time and biomechanical variables among the three shoes. The players wearing the shoe with a flexible forefoot outsole demonstrated a decreased perception of comfort in the forefoot cushion compared to regular and stiffer conditions during the comfort test (p < 0.05). The results suggested that the modification of forefoot bending stiffness would influence individual perception of comfort but would not influence performance and lower extremity kinematics during the tested badminton-specific tasks. It was concluded that an optimisation of forefoot structure and materials in badminton shoes should consider the individual’s perception to maximise footwear comfort in performance.  相似文献   

13.
Race walking is an Olympic event where no visible loss of contact should occur and the knee must be straightened until midstance. The purpose of this study was to analyse ground reaction forces of world-class race walkers and associate them with key spatiotemporal variables. Nineteen athletes race walked along an indoor track and made contact with two force plates (1000 Hz) while being filmed using high-speed videography (100 Hz). Race walking speed was correlated with flight time (r = .46, p = .049) and flight distance (r = .69, p = .001). The knee's movement from hyperextension to flexion during late stance meant the vertical push-off force that followed midstance was smaller than the earlier loading peak (p < .001), resulting in a flattened profile. Athletes with narrower stride widths experienced reduced peak braking forces (r = .49, p = .046), peak propulsive forces (r = .54, p = .027), peak medial forces (r = .63, p = .007) and peak vertical push-off forces (r = .60, p = .011). Lower fluctuations in speed during stance were associated with higher stride frequencies (r = .69, p = .001), and highlighted the importance of avoiding too much braking in early stance. The flattened trajectory and consequential decrease in vertical propulsion might help the race walker avoid visible loss of contact (although non-visible flight times were useful in increasing stride length), while a narrow stride width was important in reducing peak forces in all three directions and could improve movement efficiency.  相似文献   

14.
For activities such as squash, badminton and fencing, the ability to quickly complete a lunge and return to the start or move off in another direction is critical for success. Determining which strength qualities are important predictors of lunge performance was the focus of this study. Thirty-one male athletes performed: (1) a unilateral maximal squat (one-repetition maximum, 1-RM) and unilateral jump squat (50% 1-RM) on an instrumented supine squat machine, and (2) a forward lunge while attached to a linear transducer. We performed stepwise multiple regression analysis with lunge performance as the dependent variable and various strength, flexibility and anthropometric measures as the independent variables. From the many strength and power measures calculated, time to peak force was the best single predictor of lunge performance, which accounted for 55% of the explained variance. The best three-variable model for predicting lunge performance accounted for 76-85% of the explained variance. The models differed, however, according to whether lunge performance was expressed relative to body mass (time to peak force, mean power and relative strength = 76%) or taken as an absolute value (time to peak force, leg length and flexibility = 85%). We conclude that one to two trials were reliable for strength diagnosis and that one strength measure cannot accurately explain functional performance because other factors, such as body mass, flexibility and leg length, have diverse effects on the statistical models.  相似文献   

15.
This study examined the impact of load on lower body performance variables during the hang power clean. Fourteen men performed the hang power clean at loads of 30%, 45%, 65%, and 80% 1RM. Peak force, velocity, power, force at peak power, velocity at peak power, and rate of force development were compared at each load. The greatest peak force occurred at 80% 1RM. Peak force at 30% 1RM was statistically lower than peak force at 45% (p = 0.022), 65% (p = 0.010), and 80% 1RM (p = 0.018). Force at peak power at 65% and 80% 1RM was statistically greater than force at peak power at 30% (p < 0.01) and 45% 1RM (p < 0.01). The greatest rate of force development occurred at 30% 1RM, but was not statistically different from the rate of force development at 45%, 65%, and 80% 1RM. The rate of force development at 65% 1RM was statistically greater than the rate of force development at 80% 1RM (p = 0.035). No other statistical differences existed in any variable existed. Changes in load affected the peak force, force at peak power, and rate of force development, but not the peak velocity, power, or velocity at peak power.  相似文献   

16.
Although most ACL injury prevention programmes encourage greater hip and knee flexion during landing, it remains unknown how this technique influences tibiofemoral joint forces. We examined whether a landing strategy utilising greater hip and knee flexion decreases tibiofemoral anterior shear and compression. Twelve healthy women (25.9 ± 3.5 years) performed a drop-jump task before and after a training session (10–15 min) that emphasised greater hip and knee flexion. Peak tibiofemoral anterior shear and compressive forces were calculated using an electromyography (EMG)-driven knee model that incorporated joint kinematics, EMG and participant-specific muscle volumes and patella tendon orientation measured using magnetic resonance imaging (MRI). Participants demonstrated a decrease in peak anterior tibial shear forces (11.1 ± 3.3 vs. 9.6 ± 2.7 N · kg?1; P = 0.008) and peak tibiofemoral compressive forces (68.4 ± 7.6 vs. 62.0 ± 5.5 N · kg?1; P = 0.015) post-training. The decreased peak anterior tibial shear was accompanied by a decrease in the quadriceps anterior shear force, while the decreased peak compressive force was accompanied by decreased ground reaction force and hamstring forces. Our data provide justification for injury prevention programmes that encourage greater hip and knee flexion during landing to reduce tibiofemoral joint loading.  相似文献   

17.
Lumbar-pelvic kinematics change in response to increasing rowing stroke rates, but little is known about the effect of incremental stroke rates on changes in joint kinetics and their implications for injury. The purpose of this study was to quantify the effects of incremental rowing intensities on lower limb and lumbar-pelvic kinetics. Twelve female rowers performed an incremental test on a rowing ergometer. Kinematic data of rowers’ ankle, knee, hip and lumbar-pelvic joints, as well as external forces at the handle, seat and foot-stretchers of the rowing machine were recorded. Inter-segmental moments and forces were calculated using inverse dynamics and were compared across stroke rates using repeated measures ANOVA. Rowers exhibited increases in peak ankle and L5/S1 extensor moments, reductions in peak knee moments and no change in peak hip moments, with respect to stroke rate. Large shear and compressive forces were seen at L5/S1 and increased with stroke rate (P < 0.05). This coincided with increased levels of lumbar-pelvic flexion. High levels of lumbar-pelvic loading at higher stroke rates have implications with respect to injury and indicated that technique was declining, leading to increased lumbar-pelvic flexion. Such changes are not advantageous to performance and can potentially increase the risk of developing injuries.  相似文献   

18.
The purposes of this study were to characterise the golfer–ground interactions during the swing and to identify meaningful associations between the golfer–ground interaction force/moment parameters and the maximum clubhead speed in 63 highly skilled male golfers (handicap ≤ 3). Golfers performed shots in 3 club conditions (driver, 5-iron and pitching wedge) which were captured by an optical motion capture system and 2 force plates. In addition to the ground reaction forces (GRFs), 3 different golfer–ground interaction moments (GRF moments, pivoting moments and foot contact moments) were computed. The GRF moment about the forward/backward (F/B) axis and the pivoting moment about the vertical axis were identified as the primary moments. Significant (p < 0.05) correlations of peak force parameters (all components in the lead foot and F/B component in the trail foot) and peak moment parameters (lead-foot GRF moment and trail-foot pivoting moment) to clubhead speed were found. The lead-foot was responsible for generating the GRF moment, while the trail foot contributed to the pivoting moment more. The instant the lead arm becomes parallel to the ground was identified as the point of maximum angular effort, and the loading onto the lead-foot near this point was critical in generating both peak moments.  相似文献   

19.
ABSTRACT

A common practice in resistance training is to perform sets of exercises at, or close to failure, which can alter movement dynamics. This study examined ankle, knee, hip, and lumbo-pelvis dynamics during the barbell back squat under a moderate-heavy load (80% of 1 repetition maximum (1RM)) when performed to failure. Eleven resistance trained males performed three sets to volitional failure. Sagittal plane movement dynamics at the ankle, knee, hip, and lumbo-pelvis were examined; specifically, joint moments, joint angles, joint angular velocity, and joint power. The second repetition of the first set and the final repetition of the third set were compared. Results showed that while the joint movements slowed (p < 0.05), the joint ranges of motion were not altered There were significant changes in most mean joint moments (p < 0.05), indicating altered joint loading. The knee moment decreased while the hip and lumbo-pelvis moments underwent compensatory increases. At the knee and hip, there were significant decreases (p < 0.05) in concentric power output (p < 0.05). Whilst performing multiple sets to failure altered some joint kinetics, the comparable findings in joint range ofmotion suggest that technique was not altered. Therefore, skilled individuals appear to maintain technique when performing to failure.  相似文献   

20.
Swing trajectory and ground reaction forces (GRF) of 30 collegiate baseball batters hitting a pitched ball were compared between a standard bat, a bat with extra weight about its barrel, and a bat with extra weight in its handle. It was hypothesised that when compared to a standard bat, only a handle-weighted bat would produce equivalent bat kinematics. It was also hypothesised that hitters would not produce equivalent GRFs for each weighted bat, but would maintain equivalent timing when compared to a standard bat. Data were collected utilising a 500 Hz motion capture system and 1,000 Hz force plate system. Data between bats were considered equivalent when the 95% confidence interval of the difference was contained entirely within ±5% of the standard bat mean value. The handle-weighted bat had equivalent kinematics, whereas the barrel-weighted bat did not. Both weighted bats had equivalent peak GRF variables. Neither weighted bat maintained equivalence in the timing of bat kinematics and some peak GRFs. The ability to maintain swing kinematics with a handle-weighted bat may have implications for swing training and warm-up. However, altered timings of kinematics and kinetics require further research to understand the implications on returning to a conventionally weighted bat.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号