首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 171 毫秒
1.
基于模糊支持向量机的语音情感识别   总被引:1,自引:0,他引:1  
根据输入样本对分类结果不同的影响程度,引入模糊隶属度,探讨了模糊支持向量机(FSVM)原理,并将其应用于汉语语音信号中生气、高兴、悲伤、惊奇4种主要情感类型的识别。仿真实验结果表明FSVM比支持向量机(SVM)有着更好的分类性能和更高的识别率。  相似文献   

2.
支持向量机(SVM)是统计学习理论最为成功的实现。支持向量机适用于两类样本的分类问题,面对正负样本数目失衡的情况,加权的方法虽然能有效改变分类器对数目小的样本类的预测偏置问题,但往往是以牺牲数目较大样本类的预测精度为前提。单分类支持向量机(One-SVM)只用某一类样本来训练分类器,可以有效避免预测偏置问题的出现。本文将单分类支持向量机(One-classSVM)用于UCI数据库的灯盏花分类研究,结果显示,单分类支持向量机在处理样本数目失衡的模式识别问题中,具有良好的泛化能力,预测精度特异性达到95.45%,同时单分类支持向量机只用一类样本训练分类器,在算法的时间复杂度上也具有优势。  相似文献   

3.
<正>支持向量机(support vector machine,SVM) (文献[1-2])是近几年来的研究热点,特别是使用SVM进行分类获得了极大的成功。然而当样本较大时,运算速度比较慢,使其应用受到了局限。文献[3]提出了中心支持向量机,它把以往的支持向量机同中心向量结合使用,改善了最优超平面  相似文献   

4.
针对传统的SVM在实际应用中存在的过拟合问题、最优分类超平面的倾斜问题和推广误差界的问题,引入了总间隔算法和不同代价算法。介绍了基于总间隔的自适应模糊支持向量机(TAF-SVM)的原理和判别机制,并将它应用于线性和非线性领域。  相似文献   

5.
支持向量机(Support Vector Machine,SVM)就是在我们日常学习统计理论基础上发展起来的新方法,其训练算法本质上是一个二次规划的求解问题。本文对支持向量机的理论进行了系统的介绍,并对SVM训练算法进行综述,并对未来的研究方向进行展望。  相似文献   

6.
支持向量机(Support Vector Machine,SVM)在解决小样本、非线性及高维模式识别中具有优势,但核函数的选取没有定论,且其参数对SVM模型的性能起重要作用。针对这些问题,文章建立了基于SVM的分类模型,并通过UCI数据集验证了径向基核函数(Radial Basis Function,RBF)较其他核函数的有效性,其中核参数的选取采用改进的网格搜索法进行寻优。分类实验结果表明,选择RBF核函数的分类准确度较其他核函数提高了2.5%到35%。  相似文献   

7.
评估指标体系的选取是企业信用评估的首要问题,它是一个特征选择问题。文章提出了一种针时SVM组合技术的拆分特征选择方法,其主要思想是时SVM组合中的各个分类器分别进行特征选择,再采用不同的特征子集作为各子分类器的输入,进行组合建模与预测。文章从filter和wrapper相结合的思想出发,进行了子分类器的特征选择;之后,针对企业信用评估问题的特点,采用了二叉树结构作为SVM的组合策略。实验表明,拆分特征选择方法能选出规模较小、具有一定差异的关键指标集,提高了模型的分类性能,并且具有计算简单,运行快速的优点。  相似文献   

8.
针对分类问题的支持向量机方法中存在对噪声和野值敏感的问题,提出了一种新的隶属度函数确定方法.研究和分析了目前针对这些问题所提出的模糊支持向量机方法,而在模糊支持向量机方法中,隶属度函数的设计是整个模糊算法的关键所在,文中主要对隶属度函数进行了深入地研究,在类中心向量方法的基础上,即在确定样本的隶属度时,对类中心距离方法进行改进,得到新的隶属度计算的方法,并从数值实验方面表明该方法的有效性和可行性.  相似文献   

9.
支持向量机(Support Vector Machine,SVM)是上世纪九十年代提出的一种基于小样本的新的统计学习方法,较好地解决了非线性、高维数、局部极小点等实际问题.文中分析了SVM基础理论并总结了目前存在的基于支持向量机的主要分类方法,包括一对多方法、一对一方法、决策有向无环图方法、基于二叉树的多类分类方法和其它方法,并对各自的优缺点及性能做了比较.  相似文献   

10.
利用模糊系统中的模糊规则和SVM中内积函数之间的关系,通过支持向量机对训练样本进行学习,由支持向量确定模糊规则,构建基于规则的模糊分类器。对人脸图像做独立成分分析,提取有利于分类的面部特征的主要独立成分。该模糊系统在ORL人脸库上的实验结果表明,该方法同样适合解决小样本、非线性、高维模式的分类问题。  相似文献   

11.
1 Introduction Support vector machine (SVM) is a powerful ma-chine learning tool capable of representing non-linearrelationships and producing models that generalizeswell to unseen data .SVMhave been applied widelyinmany fields[1]such as hand-written character recogni-tion ,text categorization,computer vision,speechrec-ognition and gene classification,etc. Despite this , using an SVM requires a certainamount of model selection,i.e.,selection of the ac-tual kernel and its parameters .In rec…  相似文献   

12.
Voltage source converter high-voltage direct current (VSC-HVDC) is a new power transmission technology pref- erable in small or medium power transmission. In this paper we discuss a new control system based on space vector modulation (SVM) without any voltage line sensors. Using direct power control (DPC) SVM and a new double synchronous reference frame phase-locked loop (DSRF-PLL) approach, the control system is resistant to the majority of line voltage disturbances. Also, the system response has accelerated by using a feed forward power decoupled loop. The operation of this control strategy was verified in a SIMULINK/MATLAB simulation environment. To validate this control system, a 5 kV.A prototype system was constructed. Compared to the original controllers, the current total harmonic distortion (THD), the active and reactive deviations and the DC voltage overshoot were lowered by 2.5%, 6.2% and 8%, respectively. The rectifier power factor in the worst condition was 0.93 and the DC voltage settling time was 0.2 s.  相似文献   

13.
传统的支持向量机分类算法在优化过程中对所有支持向量都进行优化,增加了计算量,降低了训练效率.针对上述缺点,在分析样本模糊隶属关系的基础上,采用改进的K近邻算法为已知样本分配隶属度,根据训练样本的隶属关系,剔除非支持向量,减少训练样本,并将其用于中文网页的分类中,得到了较好的分类效果.仿真实验结果表明,改进后的方法不仅相对简单,而且在保证分类器性能的情况下,能有效地减少支持向量机的训练样本数,从而提高支持向量机的训练和测试速度.  相似文献   

14.
针对传统滑模变结构控制器(SMC)的抖振现象,提出了一种模糊自适应滑模控制方法.该方法采用模糊逻辑系统来逼近传统SMC中不连续的控制信号,以削弱其由于不连续切换引起的抖振.另外,为了补偿实际应用中系统的不确定性,给出了相应的自适应算法,以调节模糊系统的参数,并给出了算法的Lyapunov稳定性证明.最后,通过对一个感应电机位置控制的数值仿真计算,验证了方法的有效性.  相似文献   

15.
本文采用集中性和多样性策略对禁忌搜索进行改进,提出了一种基于模糊神经网络的混合禁忌搜索优化算法(FNN-based Hybrid Tabu Search Algorithm,FNN-HTS),用于同时优化模糊神经网络的结构和参数以提取出一组尽量精练的模糊规则。在FNN-HTS中,禁忌搜索用于同时优化网络结构和隶属函数参数,结合最小二乘法快速求解规则后件的线性参数。非线性函数逼近的实验结果表明所提出的方法能获得一组更精练的规则和更小的误差。  相似文献   

16.
INTRODUCTION Support Vector Machine (SVM) is a relativelynew soft computing method based on statisticallearning theory presented by Vapnik (1995). In SVM,original input space is mapped into a high dimen-sional dot product space called feature space in whichthe optimal hyperplane is determined to maximize thegeneralization ability of the classifier. The optimalhyperplane is found by exploiting a branch ofmathematics, called optimization theory, and re-specting the insights provided by …  相似文献   

17.
A fault diagnosis model is proposed based on fuzzy support vector machine (FSVM) combined with fuzzy clustering (FC).Considering the relationship between the sample point and non-self class,FC algorithm is applied to generate fuzzy memberships.In the algorithm,sample weights based on a distribution density function of data point and genetic algorithm (GA) are introduced to enhance the performance of FC.Then a multi-class FSVM with radial basis function kernel is established according to directed acyclic graph algorithm,the penalty factor and kernel parameter of which are optimized by GA.Finally,the model is executed for multi-class fault diagnosis of rolling element bearings.The results show that the presented model achieves high performances both in identifying fault types and fault degrees.The performance comparisons of the presented model with SVM and distance-based FSVM for noisy case demonstrate the capacity of dealing with noise and generalization.  相似文献   

18.
To prevent the oxygen starvation and improve the system output performance, an adaptive inverse control (AIC) strategy is developed to regulate the air supply flow of a proton exchange membrane fuel cell (PEMFC) system in this paper.The PEMFC stack and the air supply system including a compressor and a supply manifold are modeled for the purpose of performance analysis and controller design. A recurrent fuzzy neural network (RFNN) is utilized to identify the inverse model of the controlled system and generates a suitable control input during the abrupt step change of external disturbances. Compared with the PI controller, numerical simulations are performed to validate the effectiveness and advantages of the proposed AIC strategy.  相似文献   

19.
y Control Based on Genetic Algorithm and Its ApplicationsTX1IntroductionMembershipfunctionisthebasisforfuzzylogictheorytoappli...  相似文献   

20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号