首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Three-dimensional (3-D) high-speed cinematographic techniques were used to record topspin and backspin forehand approach shots hit down-the-line by high-performance players. The direct linear transformation (DLT) technique was used in the 3-D space reconstruction from 2-D images recorded via laterally placed phase-locked cameras operating at 200 Hz. A Mann-Whitney U-test was calculated for the different aspects of the topspin and backspin shots to test for significance (P less than 0.05). A significant difference was recorded between topspin and backspin shots in the angle of the racket at the completion of the backswing. The racket was taken 0.48 rad past a line drawn perpendicular to the back fence for topspin trials, but only rotated 0.86 rad from a line parallel to the net in the backspin shot. Maximum racket velocities occurred prior to impact and were significantly higher in topspin (26.5 m s-1) compared to backspin (16.6 m s-1) trials. This resulted in the topspin trials recording a significantly higher ball velocity compared to backspin trials (27.6 m s-1 vs 21.7 m s-1). Pre-impact racket trajectories revealed that in topspin shots the racket moved on an upward path of 0.48 rad while in backspin shots it moved down at an angle of 0.34 rad. In the topspin trials impact occurred significantly further forward of the front foot than in backspin shots (0.26 m vs 0.05 m) while the angle of the racket was the same for both strokes (0.14 rad behind a line parallel to the net). The mean angle of the racket-face at impact was inclined backwards by 0.11 rad for backspin strokes and rotated forward by 0.13 rad for topspin strokes. Angles of incidence and reflection of the impact between the ball and the court showed that backspin trials had larger angles of incidence and reflection than topspin strokes.  相似文献   

2.
Abstract

The purpose of this study was to investigate whether performance level and ball spin affect arm and racket kinematics of the table tennis topspin forehand. Nine advanced and eight intermediate male table tennis players hit topspin forehands against light and heavy backspins. Five high-speed video cameras were used to record their strokes at 200 fps. Contributions of joint rotations to the racket speed, the racket kinematics at ball impact, the time required for racket acceleration and the maximum slope of the racket speed-time curve (s max) were determined. The advanced players showed a significantly larger contribution of lower trunk axial rotation to the racket speed at impact and a significantly larger value of smax, and tended to require a less time for racket acceleration than the intermediate players. The racket speed at impact was not significantly different between the two player groups. The players adjusted the racket face angle rather than the inclination of the racket path at impact to the different ball spins. The results suggest that the ability to accelerate the racket in less time in the topspin forehand against backspin balls may be an important factor that affects the performance level.  相似文献   

3.
The purpose of this study was to assess the contributions of racket arm joint rotations to the racket tip velocity at ball impact in table tennis topspin backhands against topspin and backspin using the method of Sprigings et al. (1994). Two cine cameras were used to determine three-dimensional motions of the racket arm and racket, and the contributions of the rotations for 11 male advanced table tennis players. The racket upward velocity at impact was significantly higher in the backhand against backspin than against topspin, while the forward velocity was not significantly different between the two types of backhands. The negative contribution of elbow extension to the upward velocity was significantly less against backspin than against topspin. The contribution of wrist dorsiflexion to the upward velocity was significantly greater against backspin than against topspin. The magnitudes of the angular velocities of elbow extension and wrist dorsiflexion at impact were both similar between the two types of backhands. Our results suggest that the differences in contributions of elbow extension and wrist dorsiflexion to the upward velocity were associated with the difference in upper limb configuration rather than in magnitudes of their angular velocities.  相似文献   

4.
The kinematics of the racket and ball near impact in tennis forehands were studied to document typical variation in successful and unsuccessful shots, in order to determine biomechanically meaningful differences in advanced players and confirm models of groundstroke trajectories. Seven tennis players (six males and one female) were videoed from the side at 180 Hz as they performed 40 forehand drives on an indoor tennis court. Vertical plane kinematics of the racket and ball near impact were analysed for sub samples of successful and unsuccessful shots for each subject. Most racket kinematic variables were very consistent (mean CV< 6.3%) for successful shots, so bio mechanically meaningful differences in angles and velocities of the racket and ball (3° and 2 m s−1) near impact could be detected between successful and unsuccessful shots. Four subjects tended to miss long and three subjects missed shots in the net that were reflected in initial ball trajectories. Mean (SD) initial trajectories for long shots were 9.8° (1.4°), while netted shots were 0.7° (1.1°) above the horizontal. The initial ball trajectories and margins for error for these subjects were smaller than those previously reported (Brody, 1987) because players tended to select mean ball trajectories close to one error than another, differing amounts of topspin, or incorrect lift and drag coefficients for tennis balls had not been published when this model was created. The present data can be used to confirm if recent models (Cookeet al., 2003; Dignallet al., 2004) more closely match actual performance by advanced players.  相似文献   

5.
Topspin has become a vital component of modern day tennis. Ball-to-string bed and inter-string friction coefficients can affect topspin generation from a racket. The aim of this research was to determine the effect of string bed pattern on topspin generation. Tennis balls were projected onto nine head-clamped rackets with different string bed patterns. The balls were fired at 24 m/s, at an angle of 26° to the string bed normal with a backspin rate of 218 rad/s and outbound velocity, spin and angle were measured. Outbound velocity was shown to be independent of string bed pattern. Outbound angle increased with the number of cross strings, while outbound topspin decreased. In the most extreme case, decreasing the number of cross strings from 19 to 13 increased rebound topspin from 117 to 170 rad/s.  相似文献   

6.
The purpose of this study was to investigate the effect of the racket mass and the rate of strokes on the kinematics and kinetics of the trunk and the racket arm in the table tennis topspin backhand. Eight male Division I collegiate table tennis players hit topspin backhands against topspin balls projected at 75 balls · min?1 and 35 balls · min?1 using three rackets varying in mass of 153.5, 176 and 201.5 g. A motion capture system was used to obtain trunk and racket arm motion data. The joint torques of the racket arm were determined using inverse dynamics. The racket mass did not significantly affect all the trunk and racket arm kinematics and kinetics examined except for the wrist dorsiflexion torque, which was significantly larger for the large mass racket than for the small mass racket. The racket speed at impact was significantly lower for the high ball frequency than for the low ball frequency. This was probably because pelvis and upper trunk axial rotations tended to be more restricted for the high ball frequency. The result highlights one of the advantages of playing close to the table and making the rally speed fast.  相似文献   

7.
The ability to generate a high racket speed and a large amount of racket kinetic energy on impact is important for table tennis players. The purpose of this study was to understand how mechanical energy is generated and transferred in the racket arm during table tennis backhands. Ten male advanced right-handed table tennis players hit topspin backhands against pre-impact topspin and backspin balls. The joint kinetics at the shoulder, elbow and wrist of the racket arm was determined using inverse dynamics. A majority of the mechanical energy of the racket arm acquired during forward swing (65 and 77% against topspin and backspin, respectively) was due to energy transfer from the trunk. Energy transfer by the shoulder joint force in the vertical direction was the largest contributor to the mechanical energy of the racket arm against both spins and was greater against backspin than against topspin (34 and 28%, respectively). The shoulder joint force directed to the right, which peaked just before impact, transferred additional energy to the racket. Our results suggest that the upward thrust of the shoulder and the late timing of the axial rotation of the upper trunk are important for an effective topspin backhand.  相似文献   

8.
The application of advanced engineering to tennis racket design has influenced the nature of the sport. As a result, the International Tennis Federation has established rules to limit performance, with the aim of protecting the nature of the game. This paper illustrates how changes to the racket affect the player-racket system. The review integrates engineering and biomechanical issues related to tennis racket performance, covering the biomechanical characteristics of tennis strokes, tennis racket performance, the effect of racket parameters on ball rebound and biomechanical interactions. Racket properties influence the rebound of the ball. Ball rebound speed increases with frame stiffness and as string tension decreases. Reducing inter-string contacting forces increases rebound topspin. Historical trends and predictive modelling indicate swingweights of around 0.030–0.035 kg/m2 are best for high ball speed and accuracy. To fully understand the effect of their design changes, engineers should use impact conditions in their experiments, or models, which reflect those of actual tennis strokes. Sports engineers, therefore, benefit from working closely with biomechanists to ensure realistic impact conditions.  相似文献   

9.
The purpose of this study was to determine the significance of mechanical energy generation and transfer in the upper limb in generating the racket speed during table tennis topspin forehands. Nine advanced and eight intermediate table tennis players performed the forehand stroke at maximum effort against light and heavy backspin balls. Five high-speed video cameras operating at 200 fps were used to record the motions of the upper body of the players. The joint forces and torques of the racket arm were determined with inverse dynamics, and the amount of mechanical energy generated and transferred in the arm was determined. The shoulder internal rotation torque exerted by advanced players was significantly larger than that exerted by the intermediate players. Owing to a larger shoulder internal rotation torque, the advanced players transferred mechanical energy from the trunk of the body to the upper arm at a higher rate than the intermediate players could. Regression of the racket speed at ball impact on the energy transfer to the upper arm suggests that increase in the energy transfer may be an important factor for enabling intermediate players to generate a higher racket speed at impact in topspin forehands.  相似文献   

10.
The purpose of this study was to determine hip joint kinetics during a table tennis topspin forehand, and to investigate the relationship between the relevant kinematic and kinetic variables and the racket horizontal and vertical velocities at ball impact. Eighteen male advanced table tennis players hit cross-court topspin forehands against backspin balls. The hip joint torque and force components around the pelvis coordinate system were determined using inverse dynamics. Furthermore, the work done on the pelvis by these components was also determined. The peak pelvis axial rotation velocity and the work done by the playing side hip pelvis axial rotation torque were positively related to the racket horizontal velocity at impact. The sum of the work done on the pelvis by the backward tilt torques and the upward joint forces was positively related to the racket vertical velocity at impact. The results suggest that the playing side hip pelvis axial rotation torque exertion is important for acquiring a high racket horizontal velocity at impact. The pelvis backward tilt torques and upward joint forces at both hip joints collectively contribute to the generation of the racket vertical velocity, and the mechanism for acquiring the vertical velocity may vary among players.  相似文献   

11.
  相似文献   

12.
Tennis     
The study investigated differences in the one‐ (SH) and two‐handed (DH) backhands when hit flat, across‐court (AC) and down‐the‐line (DL), and with heavy topspin DL (TDL). The ability to disguise each of these backhands when hitting the above strokes was also assessed. Eighteen college‐level male tennis players, identified as having a high performance topspin SH (n = 6) or DH (n = 12) backhand drive, participated in the study. Players were required to hit three AC, DL and TDL backhands from the baseline with their preferred technique, while being filmed with two high‐speed video cameras operating at 200 Hz. The highest horizontal velocity backhand for each stroke was analysed. Results indicated that the sequential coordination of five body segments (hips, shoulder, upper arm, forearm, and hand/racquet rotations) was required for the execution of the SH stroke. The same number of segments were generally coordinated in the DH stroke (hips, shoulders, and varying degrees of upper arm and forearm rotations followed by hand/racquet movement). Mature players produced comparable racquet horizontal velocities 0.005 s prior to impact using either the SH or DH backhand technique. The SH backhand was characterised by a more rotated shoulder alignment than the DH stroke (SH: 119.1°; DH: 83.4°) at the completion of the backswing. At impact the ball was impacted further in front (SH: 0.59 m; DH: 0.40 m) and a similar distance to the side of the body (SH: 0.75 m; DH: 0.70 m). Players using the DH backhand technique delayed the horizontal acceleration of the racquet towards the ball (SH: 0.13 s; DH: 0.08 s prior to impact) and thus were capable of displaying a similar hitting motion closer to impact than players with a SH technique.  相似文献   

13.
Modern tennis rackets are manufactured from composite materials with high stiffness-to-weight ratios. In this paper, a finite element (FE) model was constructed to simulate an impact of a tennis ball on a freely suspended racket. The FE model was in good agreement with experimental data collected in a laboratory. The model showed racket stiffness to have no influence on the rebound characteristics of the ball, when simulating oblique spinning impacts at the geometric stringbed centre. The rebound velocity and topspin of the ball increased with the resultant impact velocity. It is likely that the maximum speed at which a player can swing a racket will increase as the moment of inertia (swingweight) decreases. Therefore, a player has the capacity to hit the ball faster, and with more topspin, when using a racket with a low swingweight.  相似文献   

14.
Abstract

The displacement of the golf ball struck by a driving club is affected by several player characteristics and equipment parameters and their interrelationships. Some modelling and simulation studies have shown a relationship between shaft length and clubhead speed, supported by a few experimental studies. The aim of the present study was to examine the relationship between driver length and ball launch conditions in an indoor test facility using a ball launch monitor. Nine males considered to be skilled golfers participated in the study. Four driving clubs of total length 117, 119, 124, and 132 cm were assembled from commercially available components and were used to strike golf shots while initial ball velocity, backspin rate, and launch angles were measured. Statistical analysis identified a significant difference in initial launch speed due to club length, a significant difference between participants, but no difference between the trials for a given golfer. A positive trend was noted between backspin and launch angle for all four clubs, and significant inverse associations between initial launch speed and backspin rate and launch angle. However, the combined launch conditions associated with increasing length were not considered optimal, with uncontrolled swingweight and moment of inertia effects considered to be limiting factors.  相似文献   

15.
Many slo-pitch coaches and players believe that generating spin on a ball can affect its trajectory. The influence of air resistance on a ball that is thrown at a moderate speed and spin is unclear. The aim of this study was to examine the influence of spin on the ball's trajectory in slo-pitch pitching using both experimental results and ball flight simulations. Fourteen pitchers participated in the study, each of whom threw five backspin and topspin pitches each. Data were collected using standard three-dimensional videography. The horizontal velocity, vertical velocity, angular velocity, release height, and horizontal displacement of the backspin pitches were significantly higher than those of the topspin pitches. The ball flight simulations were developed to examine the influence of the ball spin, and it was concluded that the spin of the ball had a significant effect on the ball's vertical and horizontal displacements. Furthermore, our results suggest that a backspin pitch that reaches the maximum height allowable and lands in the front edge of the strike zone has the steepest slope. The present results add to our understanding of projectile motion and aerodynamics.  相似文献   

16.
ABSTRACT

The aim of the present study was to compare the biomechanical characteristics of the table tennis top spin shot when played cross-court (CC) or long-line (LL) in competitive table tennis players. Seven national level players respectively completed 10 long-line and 10 cross-court top spin shots responding to a standard ball machine. A stereophotogrammetric system was used to track body segments while executing the motion. Significantly more flexed right knee and elbow angles were measured at the moment of maximum velocity of the racket (MMV) in LL. In addition, significantly greater angles between the feet and the table and between the shoulders and the table at the MMV, indicated more pronounced rotation angles of the lower upper and upper-body in LL compared to CC with respect to the table. A higher inclination of the racket at the MMV was found in LL. The elbow flexion and the racket inclination may be associated to the direction of the shot. The present findings show that kinematic differences exist between the LL and the CC topspin forehand in competitive table tennis players. Coaches should be aware of these differences to adopt the optimal teaching strategies and to reproduce proper joint angles during training.  相似文献   

17.
A forward dynamics computer simulation for replicating tennis racket/ball impacts is described consisting of two rigid segments coupled with two degrees of rotational freedom for the racket frame, nine equally spaced point masses connected by 24 visco-elastic springs for the string-bed and a point mass visco-elastic ball model. The first and second modal responses both in and perpendicular to the racket string-bed plane have been reproduced for two contrasting racket frames, each strung at a high and a low tension. Ball/string-bed normal impact simulations of real impacts at nine locations on each string-bed and six different initial ball velocities resulted in <3% RMS error in rebound velocity (over the 16–27 m/s range observed). The RMS difference between simulated and measured oblique impact rebound angles across nine impact locations was 1°. Thus, careful measurement of ball and racket characteristics to configure the model parameters enables researchers to accurately introduce ball impact at different locations and subsequent modal response of the tennis racket to rigid body simulations of tennis strokes without punitive computational cost.  相似文献   

18.
Recreational tennis players tend to have higher incidence of tennis elbow, and this has been hypothesised to be related to one-handed backhand technique and off-centre ball impacts on the racket face. This study aimed to investigate for a range of participants the effect of off-longitudinal axis and off-lateral axis ball–racket impact locations on racket and forearm joint angle changes immediately following impact in one-handed tennis backhand groundstrokes. Three-dimensional racket and wrist angular kinematic data were recorded for 14 university tennis players each performing 30 “flat” one-handed backhand groundstrokes. Off-longitudinal axis ball–racket impact locations explained over 70% of the variation in racket rotation about the longitudinal axis and wrist flexion/extension angles during the 30 ms immediately following impact. Off-lateral axis ball–racket impact locations had a less clear cut influence on racket and forearm rotations. Specifically off-longitudinal impacts below the longitudinal axis forced the wrist into flexion for all participants with there being between 11° and 32° of forced wrist flexion for an off-longitudinal axis impact that was 1 ball diameter away from the midline. This study has confirmed that off-longitudinal impacts below the longitudinal axis contribute to forced wrist flexion and eccentric stretch of the wrist extensors and there can be large differences in the amount of forced wrist flexion from individual to individual and between strokes with different impact locations.  相似文献   

19.
ABSTRACT

Knowledge of the kinematic differences that separate highly skilled and less-skilled squash players could assist the progression of talent development. This study compared trunk, upper-limb and racket kinematics between two groups of nine highly skilled and less-skilled male athletes for forehand drive, volley and drop strokes. A 15-camera motion analysis system recorded three-dimensional trajectories, with five shots analysed per participant per stroke. The highly skilled group had significantly (p < 0.05) larger forearm pronation/supination range-of-motion and wrist extension angles at impact than the less-skilled. The less-skilled group had a significantly more “open” racket face and slower racket velocities at impact than the highly skilled. Rates of shoulder internal rotation, forearm pronation, elbow extension and wrist flexion at impact were greater in the drive stroke than in the other strokes. The position of the racket at impact in the volley was significantly more anterior to the shoulder than in the other strokes, with a smaller trunk rotation angular velocity. Players used less shoulder internal/external rotation, forearm pronation/supination, elbow and wrist flexion/extension ranges-of-motions and angular velocities at impact in the drop stroke than in the other strokes. These findings provide useful insights into the technical differences that separate highly skilled from less-skilled players and provide a kinematic distinction between stroke types.  相似文献   

20.
Many slo-pitch coaches and players believe that generating spin on a ball can affect its trajectory. The influence of air resistance on a ball that is thrown at a moderate speed and spin is unclear. The aim of this study was to examine the influence of spin on the ball's trajectory in slo-pitch pitching using both experimental results and ball flight simulations. Fourteen pitchers participated in the study, each of whom threw five backspin and topspin pitches each. Data were collected using standard three-dimensional videography. The horizontal velocity, vertical velocity, angular velocity, release height, and horizontal displacement of the backspin pitches were significantly higher than those of the topspin pitches. The ball flight simulations were developed to examine the influence of the ball spin, and it was concluded that the spin of the ball had a significant effect on the ball's vertical and horizontal displacements. Furthermore, our results suggest that a backspin pitch that reaches the maximum height allowable and lands in the front edge of the strike zone has the steepest slope. The present results add to our understanding of projectile motion and aerodynamics.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号